http://www.instructables.com Tue, 29 May 2012 06:11:26 PDT BLOX v1.01 http://www.instructables.com/id/POLYRO-oPen-sOurce-friendLY-RObot/
POLYRO (oPen sOurce friendLY RObot) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJ8/P5OZ/GMX1RE2J/FJ8P5OZGMX1RE2J.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ8/P5OZ/GMX1RE2J/FJ8P5OZGMX1RE2J.SQUARE.jpg http://img.instructables.com/files/deriv/FJ8/P5OZ/GMX1RE2J/FJ8P5OZGMX1RE2J.SMALL.jpg E0HKZ63GN2XM4WV UglyBuddha This is an instructable on building a relatively low-cost wheeled robot platform for developing ROS applications. Think of ROS as an operating system for your robot (providing hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more). THIS ROBOT IS ...
By: UglyBuddha

Continue Reading »]]> technology Sat, 30 Apr 2011 17:35:52 PDT http://www.instructables.com/id/Motorized-Uniwheel-Toy-Thing-Mutt/ http://img.instructables.com/files/deriv/FU2/9GUD/GMX1T0BD/FU29GUDGMX1T0BD.SQUARE2.jpg http://img.instructables.com/files/deriv/FU2/9GUD/GMX1T0BD/FU29GUDGMX1T0BD.SQUARE.jpg http://img.instructables.com/files/deriv/FU2/9GUD/GMX1T0BD/FU29GUDGMX1T0BD.SMALL.jpg ET4RGEHGMX1T0A3 JimRD After watching the animated movie Robots for the nth time I thought it would be cool to have one of those speedy unicycle robots and after much ruminating came up with the following project. For a step-by-step instructable on how to build this toy, go here: h...
By: JimRD

Continue Reading »]]> technology Fri, 6 May 2011 08:09:31 PDT http://www.instructables.com/id/First-Arduino-Robot-Light-Seeker/
(w/ Video) Basic Arduino Robot, Light Seeker! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL5/YH1Z/GLE1MKLC/FL5YH1ZGLE1MKLC.SQUARE2.jpg http://img.instructables.com/files/deriv/FL5/YH1Z/GLE1MKLC/FL5YH1ZGLE1MKLC.SQUARE.jpg http://img.instructables.com/files/deriv/FL5/YH1Z/GLE1MKLC/FL5YH1ZGLE1MKLC.SMALL.jpg EL64GJ1GKS0T8VB Chowmix12 Many times I have Googled for "Arduino Robot" in hopes of finding a robot to build. I end up finding many versions of a obstacle avoiding robot that uses either an infrared or a sonar range finder sensor mounted on a servo to detect objects in its way while randomly roaming the area around it. The p...
By: Chowmix12

Continue Reading »]]> technology Sat, 19 Mar 2011 20:34:36 PDT http://www.instructables.com/id/Robocam-Homemade-Video-Robot/ http://img.instructables.com/files/deriv/FKQ/DBQK/GLL4YN71/FKQDBQKGLL4YN71.SQUARE2.jpg http://img.instructables.com/files/deriv/FKQ/DBQK/GLL4YN71/FKQDBQKGLL4YN71.SQUARE.jpg http://img.instructables.com/files/deriv/FKQ/DBQK/GLL4YN71/FKQDBQKGLL4YN71.SMALL.jpg E1F5V26GLL4YN6L talk2bruce Robocam is a heavy duty homemade robot platform supporting a video camera and transmitter.  The platform for Robocam is made from plywood and threaded rods.  Locomotion is provided by two surplus six volt motors connected to lawn mower wheels.  Power is provided by a lead acid battery. Rather than u...
By: talk2bruce

Continue Reading »]]> technology Sat, 2 Apr 2011 16:50:45 PDT http://www.instructables.com/id/The-Robot-Movie/ http://img.instructables.com/files/deriv/F3R/4ZMO/FG7J3RCT/F3R4ZMOFG7J3RCT.SQUARE2.jpg http://img.instructables.com/files/deriv/F3R/4ZMO/FG7J3RCT/F3R4ZMOFG7J3RCT.SQUARE.jpg http://img.instructables.com/files/deriv/F3R/4ZMO/FG7J3RCT/F3R4ZMOFG7J3RCT.SMALL.jpg EVEGK96FFAIU5X8 Tetranitrate .................................................................................................................................................................................. The Robot movie
By: Tetranitrate

Continue Reading »]]> technology Wed, 14 May 2008 07:12:24 PDT http://www.instructables.com/id/Talking-Animatronic-Robot-Head/
Talking Animatronic Robot Head - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FPW/1HPD/GJQEGXRS/FPW1HPDGJQEGXRS.SQUARE2.jpg http://img.instructables.com/files/deriv/FPW/1HPD/GJQEGXRS/FPW1HPDGJQEGXRS.SQUARE.jpg http://img.instructables.com/files/deriv/FPW/1HPD/GJQEGXRS/FPW1HPDGJQEGXRS.SMALL.jpg EY4U1N0GJQEGXRP knife141 (Robot Contest Entry Catagory = 18+) This instructable is about a talking animatronic robot head I built, which I call Robot Head 2.  To get an idea of Robot Head 2's functionality, click on the short video below or you can copy and paste the following link in your browser: http://www.youtube.com/...
By: knife141

Continue Reading »]]> technology Sat, 12 Feb 2011 23:51:13 PST http://www.instructables.com/id/The-Claw-1/
The Claw. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FIP/DAOW/GLFU0NAK/FIPDAOWGLFU0NAK.SQUARE2.jpg http://img.instructables.com/files/deriv/FIP/DAOW/GLFU0NAK/FIPDAOWGLFU0NAK.SQUARE.jpg http://img.instructables.com/files/deriv/FIP/DAOW/GLFU0NAK/FIPDAOWGLFU0NAK.SMALL.jpg EPWKND3GLDDSC1I AntMan232 This is how to build... The Claw. The Claw is my awesome 3 fingered robotic gripper. it is controlled with a servo, and can be attached to another servo which acts as a "wrist". To see what it should look like, there is a video here http://www.youtube.com/watch?v=-R7vCUfmeNU. (for the NRW contes...
By: AntMan232

Continue Reading »]]> technology Sat, 19 Mar 2011 07:11:16 PDT http://www.instructables.com/id/How-to-Make-a-Sumo-Bot-Science-Olympiad-2011-Rule/
How to Make a Sumo Bot (Science Olympiad 2011 Rules) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNR/ENG8/GL4Z6GWB/FNRENG8GL4Z6GWB.SQUARE2.jpg http://img.instructables.com/files/deriv/FNR/ENG8/GL4Z6GWB/FNRENG8GL4Z6GWB.SQUARE.jpg http://img.instructables.com/files/deriv/FNR/ENG8/GL4Z6GWB/FNRENG8GL4Z6GWB.SMALL.jpg EXTZUX7GKS0R61U AlphaFire This Sumo Bot was the Century High School, from Rochester, Minnesota, Science Olympiad Team's entry into the State Competition on March 5, 2011. Although we didn't do so well (25th out of 32 teams), I still decided to showcase my hard work, and to provide tips for other people. Here's a brief overv...
By: AlphaFire

Continue Reading »]]> technology Sun, 13 Mar 2011 22:38:42 PDT http://www.instructables.com/id/Make-a-Robotty/
Make a Robotty! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJG/L26W/GKLJ5MZN/FJGL26WGKLJ5MZN.SQUARE2.jpg http://img.instructables.com/files/deriv/FJG/L26W/GKLJ5MZN/FJGL26WGKLJ5MZN.SQUARE.jpg http://img.instructables.com/files/deriv/FJG/L26W/GKLJ5MZN/FJGL26WGKLJ5MZN.SMALL.jpg EFLJDLQFWS6KZEG seligtobiason This Instructable will show you how to create a Robot Sculpture that lights up with LEDs. The whole project is pretty inexpensive. All the parts can be found around the house and at the local hardware, and craft store. I will show you step by step detailed instructions to recreate exactly what I ha...
By: seligtobiason

Continue Reading »]]> technology Sun, 27 Feb 2011 22:45:13 PST http://www.instructables.com/id/Domo-Kun-WobblyBot-Simple-Self-Balancing-Two-Whee/
Domo Kun WobblyBot, Simple Self Balancing Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFV/IJPY/GKS0TD43/FFVIJPYGKS0TD43.SQUARE2.jpg http://img.instructables.com/files/deriv/FFV/IJPY/GKS0TD43/FFVIJPYGKS0TD43.SQUARE.jpg http://img.instructables.com/files/deriv/FFV/IJPY/GKS0TD43/FFVIJPYGKS0TD43.SMALL.jpg EGNQVU2GKS0QKA2 Chein A self balancing two-wheel robot that wobbles, hence the name WobblyBot. Quite possibly the simplest design for a robot that could (sort of) balance itself on two wheels, without the use of accelerometer, gyroscope or microcontroller. A great weekend project, and do check out the video to ...
By: Chein

Continue Reading »]]> technology Sun, 6 Mar 2011 02:20:45 PST http://www.instructables.com/id/Animatronic-Fish/ http://img.instructables.com/files/deriv/FD2/5FXG/GKQ365AG/FD25FXGGKQ365AG.SQUARE2.jpg http://img.instructables.com/files/deriv/FD2/5FXG/GKQ365AG/FD25FXGGKQ365AG.SQUARE.jpg http://img.instructables.com/files/deriv/FD2/5FXG/GKQ365AG/FD25FXGGKQ365AG.SMALL.jpg EE5TCC6GKQ364M8 iminthebathroom This is sadly another mere photo-instructable.  This was built before I discovered instructables, and sadly before I started taking pictures of steps along the way.  My buddy Paul was always telling em to document my builds, pesky hindsight!  Video to be posted soon - Oh look-ee videos posted! ...
By: iminthebathroom

Continue Reading »]]> technology Mon, 28 Feb 2011 20:34:01 PST http://www.instructables.com/id/Animatronic-Penguin-Torso/
Animatronic Penguin Torso - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FM9/TFS9/GJQEKVZG/FM9TFS9GJQEKVZG.SQUARE2.jpg http://img.instructables.com/files/deriv/FM9/TFS9/GJQEKVZG/FM9TFS9GJQEKVZG.SQUARE.jpg http://img.instructables.com/files/deriv/FM9/TFS9/GJQEKVZG/FM9TFS9GJQEKVZG.SMALL.jpg E1BSR41GJQEC1J3 djsfantasi I had a dream of developing an animated Christmas Holiday Season display, potentially as a fund raiser for the arts. My original idea was to use puppets as characters, but reading and investigating made me curious as to whether I could build an animatronic penguin. This instructable concentrates o...
By: djsfantasi

Continue Reading »]]> technology Thu, 24 Feb 2011 11:22:39 PST http://www.instructables.com/id/DIY-PIXARs-AUTO/ http://img.instructables.com/files/deriv/F2U/DJ50/GKGL5GZT/F2UDJ50GKGL5GZT.SQUARE2.jpg http://img.instructables.com/files/deriv/F2U/DJ50/GKGL5GZT/F2UDJ50GKGL5GZT.SQUARE.jpg http://img.instructables.com/files/deriv/F2U/DJ50/GKGL5GZT/F2UDJ50GKGL5GZT.SMALL.jpg E9QI7HDGKGL5GU2 SHIFT! Even though it's fairly unlikely I will be posting a step by step Instructable on him I figured, what with National Robot Week, I could still share a couple of photos of one of my earliest PIXAR builds the villainous Autopilot from WALL·E.   Back in the spring of 2009, when I was the Public Represe...
By: SHIFT!

Continue Reading »]]> technology Tue, 22 Feb 2011 02:35:41 PST http://www.instructables.com/id/Solar-Powered-Robot-from-TRASH/
Solar Powered Robot from TRASH!!!! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3P/76WQ/GJQEHZ2X/F3P76WQGJQEHZ2X.SQUARE2.jpg http://img.instructables.com/files/deriv/F3P/76WQ/GJQEHZ2X/F3P76WQGJQEHZ2X.SQUARE.jpg http://img.instructables.com/files/deriv/F3P/76WQ/GJQEHZ2X/F3P76WQGJQEHZ2X.SMALL.jpg ETXK4O5GK3TOKH1 martzsam Update; My age category for the contest is 13-18 because I am fifteen. :) Yes, the title explains it pretty well. In this Instructable I will show you step by step how to construct a light sensitive, solar powered, robot. All you need is some parts that can easily be found in the trash or in your b...
By: martzsam

Continue Reading »]]> technology Thu, 17 Feb 2011 17:31:17 PST http://www.instructables.com/id/Voice-Control-Robot-in-7-Minutes/
Make a Voice Controlled Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FSG/REL8/GK0YUT6T/FSGREL8GK0YUT6T.SQUARE2.jpg http://img.instructables.com/files/deriv/FSG/REL8/GK0YUT6T/FSGREL8GK0YUT6T.SQUARE.jpg http://img.instructables.com/files/deriv/FSG/REL8/GK0YUT6T/FSGREL8GK0YUT6T.SMALL.jpg EO629PSGJQEK8HU societyofrobots (requested for contest, 18+ age category) This tutorial will show how to build a simple voice controlled robot that's easy enough for beginners to make in just a few hours. I show how it can be done in two languages, both English and Thai. The cost of the entire project is about ~$224, which facto...
By: societyofrobots

Continue Reading »]]> technology Fri, 11 Feb 2011 16:48:10 PST http://www.instructables.com/id/Eyes/
Animatronic Eyes - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOS/ILPK/GJQEKVZQ/FOSILPKGJQEKVZQ.SQUARE2.jpg http://img.instructables.com/files/deriv/FOS/ILPK/GJQEKVZQ/FOSILPKGJQEKVZQ.SQUARE.jpg http://img.instructables.com/files/deriv/FOS/ILPK/GJQEKVZQ/FOSILPKGJQEKVZQ.SMALL.jpg ENGUNG9GJQEKVZP djsfantasi This instructable shows how I made a set of eyes for an animatronic robot character. They only move from side to side, but have working eyelids. (18+) I actually modified a manually controlled set of DIY puppet eyes, to use servos. Hence, I originally performed the steps in a drastically different ...
By: djsfantasi

Continue Reading »]]> technology Tue, 15 Feb 2011 17:01:54 PST http://www.instructables.com/id/Make-A-Robot-Ant/
Make A Robot Ant - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWH/I2WJ/GJQEADEE/FWHI2WJGJQEADEE.SQUARE2.jpg http://img.instructables.com/files/deriv/FWH/I2WJ/GJQEADEE/FWHI2WJGJQEADEE.SQUARE.jpg http://img.instructables.com/files/deriv/FWH/I2WJ/GJQEADEE/FWHI2WJGJQEADEE.SMALL.jpg EBTLI8ZGJQEADCZ mikey77 Build a robot ant that can be remote controlled or operate autonomously. Using an infrared detector, it can find and pick up objects. It is controlled by a Picaxe 20x-2 microcontroller. While this is a fairly intricate robot, some of the motor techniques and circuits can be used for other simpler r...
By: mikey77

Continue Reading »]]> technology Sun, 13 Feb 2011 13:53:28 PST http://www.instructables.com/id/Mechanized-Android-Figure/
Mechanized Android Figure - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5R/0CJH/GJQEFPA1/F5R0CJHGJQEFPA1.SQUARE2.jpg http://img.instructables.com/files/deriv/F5R/0CJH/GJQEFPA1/F5R0CJHGJQEFPA1.SQUARE.jpg http://img.instructables.com/files/deriv/F5R/0CJH/GJQEFPA1/F5R0CJHGJQEFPA1.SMALL.jpg EZ145YQGJQED484 tanabata These Android figures are cute, but they don't actually do anything. Let's change that. Have a look at the video: These are the steps to make an Android that reacts to sound, moves it's head, sends out Morse Code messages and displays some cool light patterns. In the video...
By: tanabata

Continue Reading »]]> technology Sat, 12 Feb 2011 23:45:23 PST http://www.instructables.com/id/Bubblebot-Gigantic-Bubble-Generator/
Bubblebot: Gigantic Bubble Generator - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FN3/22B1/GJQEKIGC/FN322B1GJQEKIGC.SQUARE2.jpg http://img.instructables.com/files/deriv/FN3/22B1/GJQEKIGC/FN322B1GJQEKIGC.SQUARE.jpg http://img.instructables.com/files/deriv/FN3/22B1/GJQEKIGC/FN322B1GJQEKIGC.SMALL.jpg EXS3OHMGJQEK339 zvizvi Welcome Here is one grand weekend project! Make this awesome Bubble Bot: While being a bit lengthy and requiring experience with Arduino, this contraption is bound to grant you infinite glory among your friends, toddlers and grownups alike! Avast, then! What You Need Here's a list of t...
By: zvizvi

Continue Reading »]]> technology Sat, 12 Feb 2011 20:32:27 PST http://www.instructables.com/id/Robotic-arm-controlled-by-NES-gamepad/
Robotic arm controlled by NES gamepad - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FPY/MLJ2/GJQEGFFM/FPYMLJ2GJQEGFFM.SQUARE2.jpg http://img.instructables.com/files/deriv/FPY/MLJ2/GJQEGFFM/FPYMLJ2GJQEGFFM.SQUARE.jpg http://img.instructables.com/files/deriv/FPY/MLJ2/GJQEGFFM/FPYMLJ2GJQEGFFM.SMALL.jpg EVW4UNOGBVJH3QY brunoip In this instructable I gonna try to describe how to make a robotic arm with parts from a printer, and control it using a NES gamepad. It may look like a hard work but I have prepared templates for all the parts and I try to take pictures for all the angles in order to make it simple. Also it is a r...
By: brunoip

Continue Reading »]]> technology Thu, 10 Feb 2011 10:58:15 PST http://www.instructables.com/id/Hacking-Automotive-Ultrasonic-Sensors/
Hacking Automotive Ultrasonic Sensors - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FO1/XTNA/GIJG3TSA/FO1XTNAGIJG3TSA.SQUARE2.jpg http://img.instructables.com/files/deriv/FO1/XTNA/GIJG3TSA/FO1XTNAGIJG3TSA.SQUARE.jpg http://img.instructables.com/files/deriv/FO1/XTNA/GIJG3TSA/FO1XTNAGIJG3TSA.SMALL.jpg E7NGI8RGIJG17P5 jimk3038 This instructable will show you how to hack / reuse a common Bosch automotive ultrasonic sensor(s).  The sensor in this instructable is a very common sensor that can be found in junkyards all over the world.  The hope is that this information will allow folks to reuse these sensors in wonderful ne...
By: jimk3038

Continue Reading »]]> technology Tue, 1 Feb 2011 06:01:02 PST http://www.instructables.com/id/Solar-Cockroach-Virbobot/
Solar Cockroach Virbobot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQN/59A9/GIWZLMC3/FQN59A9GIWZLMC3.SQUARE2.jpg http://img.instructables.com/files/deriv/FQN/59A9/GIWZLMC3/FQN59A9GIWZLMC3.SQUARE.jpg http://img.instructables.com/files/deriv/FQN/59A9/GIWZLMC3/FQN59A9GIWZLMC3.SMALL.jpg EL5E4MNGIWZLMA8 JoshuaZimmerman *** The 1.5V solar cells and little nokia vibrating motors can no longer be found online.  I've written a new guide using new parts.*** I had a blast making bristlebots with my 4th grade science club a few weeks ago, so I started thinking up new ways to make simple vibrobots to give away as gifts. ...
By: JoshuaZimmerman

Continue Reading »]]> technology Sun, 16 Jan 2011 18:01:32 PST http://www.instructables.com/id/SADbot-the-Seasonally-Affected-Drawing-robot/
SADbot: the Seasonally Affected Drawing robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYB/W3OY/GI0TMEDE/FYBW3OYGI0TMEDE.SQUARE2.jpg http://img.instructables.com/files/deriv/FYB/W3OY/GI0TMEDE/FYBW3OYGI0TMEDE.SQUARE.jpg http://img.instructables.com/files/deriv/FYB/W3OY/GI0TMEDE/FYBW3OYGI0TMEDE.SMALL.jpg ET5XK88GI0TMECH dustynrobots SADbot was created in collaboration with Ben Leduc-Mills for the window gallery at the Eyebeam Art + Technology Center. The main idea was to use solar energy to power a drawing machine that could interact with people outside the window through light sensors. You can re-create this project to install...
By: dustynrobots

Continue Reading »]]> technology Sat, 1 Jan 2011 19:37:03 PST http://www.instructables.com/id/Build-Bluetooth-Robot-Fast-and-cheap/
Bluetooth Robot... Fast, cheap and reusable - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUT/30GT/GI0TGIVY/FUT30GTGI0TGIVY.SQUARE2.jpg http://img.instructables.com/files/deriv/FUT/30GT/GI0TGIVY/FUT30GTGI0TGIVY.SQUARE.jpg http://img.instructables.com/files/deriv/FUT/30GT/GI0TGIVY/FUT30GTGI0TGIVY.SMALL.jpg E7BZ12OGI0TGIUE djsures *Updated 2011-01-03: Added an additional video that demonstrates the EZ-Builder software. Intro This robot is the best platform at getting started in custom robotics. The parts used in this build, and the knowledge you learn can take you deeper into the robotics world! The EZ-B and EZ-Builder ...
By: djsures

Continue Reading »]]> technology Tue, 28 Dec 2010 15:38:07 PST http://www.instructables.com/id/Mechamo-Inchworm-hack-Crawl-along-a-string/
Mechamo Inchworm hack: Crawl along a string - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGF/ZHGM/GI0TG5BG/FGFZHGMGI0TG5BG.SQUARE2.jpg http://img.instructables.com/files/deriv/FGF/ZHGM/GI0TG5BG/FGFZHGMGI0TG5BG.SQUARE.jpg http://img.instructables.com/files/deriv/FGF/ZHGM/GI0TG5BG/FGFZHGMGI0TG5BG.SMALL.jpg EPYU12PGI0TIVSA bagleemo This instructable shows how to hack your Mechamo Inchworm to make it crawl along a suspended string. It's surprisingly easy, and should take about 10 minutes! Here's a video of my hacked Inchworm cruising along upside down, suspended from some nylon string: But how does the inchworm normally wor...
By: bagleemo

Continue Reading »]]> technology Sun, 26 Dec 2010 13:38:10 PST http://www.instructables.com/id/Electrobite-an-Electric-Wheelchair-Conversion/
Electrobite an Electric Wheelchair Conversion - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6U/4L97/GHSYTWEG/F6U4L97GHSYTWEG.SQUARE2.jpg http://img.instructables.com/files/deriv/F6U/4L97/GHSYTWEG/F6U4L97GHSYTWEG.SQUARE.jpg http://img.instructables.com/files/deriv/F6U/4L97/GHSYTWEG/F6U4L97GHSYTWEG.SMALL.jpg E2LMNG2GHSYTIMD jonsarriugarte My Wife Kyrsten and I built the Electrobite in my shop "Form & Reform" in West Oakland.  Kyrsten and I started on this project Aug 2009 and finished it just in time for Burning Man . We took an old electric wheel chair and made it into a prehistoric creature known as a trilobite. I enjoyed workin...
By: jonsarriugarte

Continue Reading »]]> technology Sun, 19 Dec 2010 16:51:46 PST http://www.instructables.com/id/Combat-Robotics-Tutorial/
Combat Robotics Tutorial - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7N/5I02/GHFK7E5T/F7N5I02GHFK7E5T.SQUARE2.jpg http://img.instructables.com/files/deriv/F7N/5I02/GHFK7E5T/F7N5I02GHFK7E5T.SQUARE.jpg http://img.instructables.com/files/deriv/F7N/5I02/GHFK7E5T/F7N5I02GHFK7E5T.SMALL.jpg E73H3YQGHFJWUZI TitanTechRobotics ***DISCLAIMER: Some of this information could be better or is inaccurate.  Specifically how big of a battery you need.  I plan on making a new tutorial eventually, but for the most part this tutorial is accurate.*** Have you ever wanted to build a combat robot (battlebot), but gave up because you d...
By: TitanTechRobotics

Continue Reading »]]> technology Mon, 13 Dec 2010 14:41:49 PST http://www.instructables.com/id/animatronic-hand-statue/
animatronic hand statue - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SQUARE2.jpg http://img.instructables.com/files/deriv/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SQUARE.jpg http://img.instructables.com/files/deriv/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SMALL.jpg EBLXJ91GGPETTXC iminthebathroom Welcome to my instructable on animatronic hand building. Addition to the section on the crank shaft build! Addition to the section on the fingers addition to the section on tumbling I was going for a rough industrial look from a bygone era.  Solenoids and servo's are the easy way to go...
By: iminthebathroom

Continue Reading »]]> technology Sun, 28 Nov 2010 22:30:57 PST http://www.instructables.com/id/Hexagon-Acrylic-Robot/
Octagon Acrylic Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FSU/H74J/GGPETIYF/FSUH74JGGPETIYF.SQUARE2.jpg http://img.instructables.com/files/deriv/FSU/H74J/GGPETIYF/FSUH74JGGPETIYF.SQUARE.jpg http://img.instructables.com/files/deriv/FSU/H74J/GGPETIYF/FSUH74JGGPETIYF.SMALL.jpg E3W4U9GGFRWQDQ5 talk2bruce Build a small programmable robot using laser cut acrylic for the platforms, toy gearboxes and motors, a handful of hardware, and a Basic Stamp Board of Education.  The robot can be programmed to move forwards, backwards, rotate right or left.  This robot is a great platform for experimentation and w...
By: talk2bruce

Continue Reading »]]> technology Sun, 28 Nov 2010 15:36:20 PST http://www.instructables.com/id/Hydraulic-robot-made-of-cardboard-and-scotch-duct-/
Hydraulic robot made of cardboard and scotch duct tape. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4B/MLCM/GGPEU4YC/F4BMLCMGGPEU4YC.SQUARE2.jpg http://img.instructables.com/files/deriv/F4B/MLCM/GGPEU4YC/F4BMLCMGGPEU4YC.SQUARE.jpg http://img.instructables.com/files/deriv/F4B/MLCM/GGPEU4YC/F4BMLCMGGPEU4YC.SMALL.jpg EQKRVTGGGPEU4VO Nelson_Yepez [ please give me a vote for the contest if you like the instructable, thanks] I always wanted to do this project but in all the guides i always found that you need some kind of wood cutting skills and/or tools. So … I decided to make a simple hydraulic robot with cardboard, reinforce and hold by du...
By: Nelson_Yepez

Continue Reading »]]> technology Sun, 28 Nov 2010 16:26:19 PST http://www.instructables.com/id/CAMLU-2010/
CAMLU 2010 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLO/UNB9/GGPFAY59/FLOUNB9GGPFAY59.SQUARE2.jpg http://img.instructables.com/files/deriv/FLO/UNB9/GGPFAY59/FLOUNB9GGPFAY59.SQUARE.jpg http://img.instructables.com/files/deriv/FLO/UNB9/GGPFAY59/FLOUNB9GGPFAY59.SMALL.jpg E12VPAAGGPEXBFZ ftking_83702 This instructable will describe how to create an updated LEGO CAMLU (Computer Activated Motorized LEGO Unit). My students and I built literally hundreds of radical variations of the LEGO DACTA 1038 robot. The original plans date back to 1985, and I have not constructed the model for years- certain...
By: ftking_83702

Continue Reading »]]> technology Mon, 22 Nov 2010 10:15:18 PST http://www.instructables.com/id/Mechanical-Frog-Motion-Simulator/
Mechanical Frog Motion Simulator - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FTN/SKCG/GGPEU3JB/FTNSKCGGGPEU3JB.SQUARE2.jpg http://img.instructables.com/files/deriv/FTN/SKCG/GGPEU3JB/FTNSKCGGGPEU3JB.SQUARE.jpg http://img.instructables.com/files/deriv/FTN/SKCG/GGPEU3JB/FTNSKCGGGPEU3JB.SMALL.jpg EG10AKNGGAOW5XB stabmenot This project shows how to build a machine that simulates basic frog movement. The machine starts out flat on the floor. A motor pulls in the legs and bends spring steel strips. The spring steel strips cause the frog body to tilt upward off the floor and onto the foot. When the machine reaches a f...
By: stabmenot

Continue Reading »]]> technology Sat, 13 Nov 2010 03:14:44 PST http://www.instructables.com/id/Walking-Shoes/
Walking Shoes - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUQ/LEP0/GEQQPB1B/FUQLEP0GEQQPB1B.SQUARE2.jpg http://img.instructables.com/files/deriv/FUQ/LEP0/GEQQPB1B/FUQLEP0GEQQPB1B.SQUARE.jpg http://img.instructables.com/files/deriv/FUQ/LEP0/GEQQPB1B/FUQLEP0GEQQPB1B.SMALL.jpg E8HY5YZGEQQPAK6 frenzy I was reminded the other day of those tiny wind-up shoes. They would walk all on their own with a little crank. I figured using my know how and ingenuity i could make a full size pair in no time. These shoes use a servo motor to drive them. This project has been featured on Gizmodo, Thanks! The H...
By: frenzy

Continue Reading »]]> technology Fri, 1 Oct 2010 15:56:05 PDT http://www.instructables.com/id/Meccano-Walking-Machine/
Meccano Walking Machine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F9L/HN2M/GELSQAEY/F9LHN2MGELSQAEY.SQUARE2.jpg http://img.instructables.com/files/deriv/F9L/HN2M/GELSQAEY/F9LHN2MGELSQAEY.SQUARE.jpg http://img.instructables.com/files/deriv/F9L/HN2M/GELSQAEY/F9LHN2MGELSQAEY.SMALL.jpg EDAQ87CGEI9D1ES KnexAndMeccanoMan This is a very cool walking machine that you can build with meccano. Now it doesn't really matter what style of meccano you use, old or new it all works. I used the 1945 - 1957 red and green meccano but you can use whatever you have available. I also used some newer electric parts from the 1990's a...
By: KnexAndMeccanoMan

Continue Reading »]]> technology Thu, 30 Sep 2010 13:24:39 PDT http://www.instructables.com/id/Robotic-Drink-Mixer/
Robotic Drink Mixer - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FR5/OP2M/GE7LEUR8/FR5OP2MGE7LEUR8.SQUARE2.jpg http://img.instructables.com/files/deriv/FR5/OP2M/GE7LEUR8/FR5OP2MGE7LEUR8.SQUARE.jpg http://img.instructables.com/files/deriv/FR5/OP2M/GE7LEUR8/FR5OP2MGE7LEUR8.SMALL.jpg EO6G1FCGE7L3XPG jamiep It's time to head back to college and that means lots of fun, parties, and EPIC TAILGATING!  (Go Razorbacks!) BUILD A ROBOTIC DRINK MIXER! This is a portable system that can mix over 5,000 drinks on demand from a laptop computer.  Build it and they will come! Here is what the Robotic Drink Mixer ...
By: jamiep

Continue Reading »]]> technology Sun, 19 Sep 2010 18:40:20 PDT http://www.instructables.com/id/Simple-Robotics-Breadboard/
Simple Robotics Breadboard - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6O/TM8T/GDTZY4FM/F6OTM8TGDTZY4FM.SQUARE2.jpg http://img.instructables.com/files/deriv/F6O/TM8T/GDTZY4FM/F6OTM8TGDTZY4FM.SQUARE.jpg http://img.instructables.com/files/deriv/F6O/TM8T/GDTZY4FM/F6OTM8TGDTZY4FM.SMALL.jpg ENNVHRQGDRPHGRZ doctek This Instructable shows you how to build a simple, inexpensive breadboard for robotics experiments. It is a companion to Cheap, Easy Robotics for the Non-Programmer. Here we'll learn how to build a Babuino robot to use for experiments with the Babuino/Blocos software environment. Using a breadb...
By: doctek

Continue Reading »]]> technology Thu, 9 Sep 2010 17:37:52 PDT http://www.instructables.com/id/Six-Legged-Walking-Robot/
Six Legged Walking Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F72/X7C4/GD2JKNU5/F72X7C4GD2JKNU5.SQUARE2.jpg http://img.instructables.com/files/deriv/F72/X7C4/GD2JKNU5/F72X7C4GD2JKNU5.SQUARE.jpg http://img.instructables.com/files/deriv/F72/X7C4/GD2JKNU5/F72X7C4GD2JKNU5.SMALL.jpg E0DZ83IGD2JKNRS r570sv Overview Take the Taymiya six legged walker robot and make a larger version of it. Ultimately I’m deciding if I want to make a bot large enough that two people can ride and drive in. See (rpantaleo http://www.instructables.com/id/Hexabot-Build-a-heavy-duty-six-legged-robot/) for a large versio...
By: r570sv

Continue Reading »]]> technology Mon, 30 Aug 2010 19:14:24 PDT http://www.instructables.com/id/RC-Nerf-Tank/
RC Nerf Tank - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMK/Y7RQ/FTM72OWC/FMKY7RQFTM72OWC.SQUARE2.jpg http://img.instructables.com/files/deriv/FMK/Y7RQ/FTM72OWC/FMKY7RQFTM72OWC.SQUARE.jpg http://img.instructables.com/files/deriv/FMK/Y7RQ/FTM72OWC/FMKY7RQFTM72OWC.SMALL.jpg E0YU3XPFTM72OVQ travis7s My first ever Instructable, yay!This was one of the more fun projects I've attempted and I'm fairly pleased with the results.Most of the parts and skills used in this project are from my fighting robot hobby. It might seem like a complex project but anyone with basic handy-person skills and willing ...
By: travis7s

Continue Reading »]]> technology Sat, 18 Apr 2009 17:28:38 PDT http://www.instructables.com/id/Simple-Bots-Inchworm/
Simple Bots: Inchworm - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FR5/ELFM/GXFXNHH8/FR5ELFMGXFXNHH8.SQUARE2.jpg http://img.instructables.com/files/deriv/FR5/ELFM/GXFXNHH8/FR5ELFMGXFXNHH8.SQUARE.jpg http://img.instructables.com/files/deriv/FR5/ELFM/GXFXNHH8/FR5ELFMGXFXNHH8.SMALL.jpg EIV3YELGC4GDH15 randofo If you can count on only one thing, it would be a ruler. Now, don't get me wrong. I am not talking about supreme despots for life, or anything of that sort. The rulers that I am referring to are the measuring kind. After all, how can you not count on something with so many sequential numbers? That i...
By: randofo

Continue Reading »]]> technology Mon, 9 Aug 2010 08:35:18 PDT http://www.instructables.com/id/Wallbots-Autonomous-Magnetic-Robots-that-Traverse/
Wallbots: Autonomous Magnetic Robots that Traverse Vertical Surfaces - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FS8/0ZHF/FUF36TBA/FS80ZHFFUF36TBA.SQUARE2.jpg http://img.instructables.com/files/deriv/FS8/0ZHF/FUF36TBA/FS80ZHFFUF36TBA.SQUARE.jpg http://img.instructables.com/files/deriv/FS8/0ZHF/FUF36TBA/FS80ZHFFUF36TBA.SMALL.jpg EIXH434FUF36SU1 staceyk This Instructable will teach you how to create magnetic robots that traverse vertical surfaces. These robots can move on any metallic walls, including elevators, whiteboards, refrigerators or metal doors. The robots are outfitted with several light sensors, allowing them to respond to simple u...
By: staceyk

Continue Reading »]]> technology Fri, 8 May 2009 13:54:37 PDT http://www.instructables.com/id/Bristle-Bot-20/
Bristle Bot 2.0 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0L/4EN7/GC4G8KNT/F0L4EN7GC4G8KNT.SQUARE2.jpg http://img.instructables.com/files/deriv/F0L/4EN7/GC4G8KNT/F0L4EN7GC4G8KNT.SQUARE.jpg http://img.instructables.com/files/deriv/F0L/4EN7/GC4G8KNT/F0L4EN7GC4G8KNT.SMALL.jpg ELZ13JDGC4G8KNM Schooniedude This is my latest bristle bot. When designing, I ran into a problem. I had no bristled surface bigger than a toothbrush! So I imprevised. I used three toothbrush heads instead of the usual one. Materials You will need: 3-Toothbrushes 1-Bamboo Skewer 1-Gift Card 1-Vibrating Motor 2-AAA's (...
By: Schooniedude

Continue Reading »]]> technology Wed, 28 Jul 2010 11:46:09 PDT http://www.instructables.com/id/Simple-Bots-Scrub/
Simple Bots: Scrub - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F01/9WVW/GXGHL1XA/F019WVWGXGHL1XA.SQUARE2.jpg http://img.instructables.com/files/deriv/F01/9WVW/GXGHL1XA/F019WVWGXGHL1XA.SQUARE.jpg http://img.instructables.com/files/deriv/F01/9WVW/GXGHL1XA/F019WVWGXGHL1XA.SMALL.jpg E1FSF5DGC4G90QA randofo As part of my effort to make our life easier through robotics, I have made a low-cost cleaning bot called Scrub Bot. This state of the art cleaning robot is great at polishing floors and shining glass tables (provided that you soap it up first). It also disperses small particulates evenly across you...
By: randofo

Continue Reading »]]> technology Fri, 30 Jul 2010 21:56:18 PDT http://www.instructables.com/id/Simple-Bots-Barreller/
Simple Bots: Barreller - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F95/UQU0/GXFXNFPC/F95UQU0GXFXNFPC.SQUARE2.jpg http://img.instructables.com/files/deriv/F95/UQU0/GXFXNFPC/F95UQU0GXFXNFPC.SQUARE.jpg http://img.instructables.com/files/deriv/F95/UQU0/GXFXNFPC/F95UQU0GXFXNFPC.SMALL.jpg EQDGW13GBVJBONT randofo A Barreller Bot is a device that has seemingly eternal forward propulsion in a given direction. In other words, there is a motor that acts as an off-centered weight inside of a can. When the can rolls forward in the direction of the weight (the weight, being the motor), the motor turns upwards, henc...
By: randofo

Continue Reading »]]> technology Thu, 29 Jul 2010 16:35:02 PDT http://www.instructables.com/id/Simple-Bots-Wobbler/
Simple Bots: Wobbler - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEO/0TWS/GXDWYH8Y/FEO0TWSGXDWYH8Y.SQUARE2.jpg http://img.instructables.com/files/deriv/FEO/0TWS/GXDWYH8Y/FEO0TWSGXDWYH8Y.SQUARE.jpg http://img.instructables.com/files/deriv/FEO/0TWS/GXDWYH8Y/FEO0TWSGXDWYH8Y.SMALL.jpg EPO42APGBV61HLU randofo Typically, you learn how to wobble before you learn how to walk. But in the world of bots, anything is possible! That is why a day after showing you how to walk and two after showing you how I roll, I am back to show you how to do a little wobble wobble. That's right! In almost no time, you can be o...
By: randofo

Continue Reading »]]> technology Wed, 28 Jul 2010 11:16:57 PDT http://www.instructables.com/id/DIY-PIXAR-M-O-Microbe-Obliterator-Cleaner-Bot/
DIY PIXAR: M-O (Microbe Obliterator) Cleaner Bot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFM/SGPT/GC1JRKBU/FFMSGPTGC1JRKBU.SQUARE2.jpg http://img.instructables.com/files/deriv/FFM/SGPT/GC1JRKBU/FFMSGPTGC1JRKBU.SQUARE.jpg http://img.instructables.com/files/deriv/FFM/SGPT/GC1JRKBU/FFMSGPTGC1JRKBU.SMALL.jpg EYWPX1ZGC1KVHAP SHIFT! Hey Instructabrarians, it's July 27th and you know what that means! Probably not because I just made it up, it's PIXAR Animation Fan Week! Folks, if you've ever seen my DIY PIXAR booth at the San Mateo Maker Faire, you'll know that I am a mega huge PIXAR fan.  I absolutely love their movies and grew...
By: SHIFT!

Continue Reading »]]> technology Tue, 27 Jul 2010 17:41:13 PDT http://www.instructables.com/id/Simple-Bots-Walker/
Simple Bots: Walker - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F47/JATZ/GX10CM56/F47JATZGX10CM56.SQUARE2.jpg http://img.instructables.com/files/deriv/F47/JATZ/GX10CM56/F47JATZGX10CM56.SQUARE.jpg http://img.instructables.com/files/deriv/F47/JATZ/GX10CM56/F47JATZGX10CM56.SMALL.jpg EJN6HVNGBOTJM9V randofo My goal with Walker Bot was to make a 4-legged walking bot that could be made in ten minutes. This bot ultimately took me three hours to make. That said, my goal wasn't to make one in ten minutes, but to make one that could be made in ten minutes. I am pretty confident that now that I know what I am...
By: randofo

Continue Reading »]]> technology Tue, 27 Jul 2010 00:08:31 PDT http://www.instructables.com/id/Line-Follower-Robot/
Line Follower Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FI1/SHP9/GC1KV9G2/FI1SHP9GC1KV9G2.SQUARE2.jpg http://img.instructables.com/files/deriv/FI1/SHP9/GC1KV9G2/FI1SHP9GC1KV9G2.SQUARE.jpg http://img.instructables.com/files/deriv/FI1/SHP9/GC1KV9G2/FI1SHP9GC1KV9G2.SMALL.jpg EV6EJ6XGC1JRATX vahid_you2004 I made a line follower robot with PIC16F84A microprocessor equipped with 4 IR sensors. This robot can run on the black and white lines. First Step Before everything you must know how to make a Printed Circuit Board and how to solder components on it. You also need to know how to program a PI...
By: vahid_you2004

Continue Reading »]]> technology Mon, 26 Jul 2010 04:12:58 PDT http://www.instructables.com/id/Simple-Bots-Rolly/
Simple Bots: Rolly - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRB/PJYN/GXDWS1JW/FRBPJYNGXDWS1JW.SQUARE2.jpg http://img.instructables.com/files/deriv/FRB/PJYN/GXDWS1JW/FRBPJYNGXDWS1JW.SQUARE.jpg http://img.instructables.com/files/deriv/FRB/PJYN/GXDWS1JW/FRBPJYNGXDWS1JW.SMALL.jpg EE6L315GB3XK7QF randofo This Simple Bot was inspired by a work by artist James Rouvelle, called Colony, in which a bunch of odd-shaped ellipsoids self-propel around their environment. It is my understanding that his bots were made by placing a vibrating motor freely inside of a Styrofoam ball that was then coated to give i...
By: randofo

Continue Reading »]]> technology Mon, 26 Jul 2010 00:06:35 PDT http://www.instructables.com/id/Remove-a-Servo-Controller/
Remove a Servo Controller - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FET/0KPZ/H0KL7LDO/FET0KPZH0KL7LDO.SQUARE2.jpg http://img.instructables.com/files/deriv/FET/0KPZ/H0KL7LDO/FET0KPZH0KL7LDO.SQUARE.jpg http://img.instructables.com/files/deriv/FET/0KPZ/H0KL7LDO/FET0KPZH0KL7LDO.SMALL.jpg ENM3CGWGBOTJCI4 randofo Servo motors are great fun when you want to easily interface a geared motor with a micro controller. However, sometimes, you want a nice little geared motor and don't want to be bothered with control circuitry to drive it. At times like this, it is good to know how to remove the controller from insi...
By: randofo

Continue Reading »]]> technology Fri, 16 Jul 2010 18:35:18 PDT http://www.instructables.com/id/Mousebot-Revisited/
Mousebot Revisited - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZ4/6DGZ/MAYEP27TBAK/FZ46DGZMAYEP27TBAK.SQUARE2.jpg http://img.instructables.com/files/deriv/FZ4/6DGZ/MAYEP27TBAK/FZ46DGZMAYEP27TBAK.SQUARE.jpg http://img.instructables.com/files/deriv/FZ4/6DGZ/MAYEP27TBAK/FZ46DGZMAYEP27TBAK.SMALL.jpg E6PN27M4CPEP286H58 m_jake Mousebot from Make vol 2 is a fun introduction to robotics. So fun that I've created this expanded documentation of a Mousey build from start to finish, with a few extra little tips you won't find in the mag. This how-to is best understood after reading the original article from page 100 of Make vol...
By: m_jake

Continue Reading »]]> technology Fri, 27 Jan 2006 05:54:50 PST http://www.instructables.com/community/interview-with-a-robot-new-york-times/ http://img.instructables.com/files/deriv/FD5/6BUM/GB5HE4KN/FD56BUMGB5HE4KN.SQUARE2.jpg http://img.instructables.com/files/deriv/FD5/6BUM/GB5HE4KN/FD56BUMGB5HE4KN.SQUARE.jpg http://img.instructables.com/files/deriv/FD5/6BUM/GB5HE4KN/FD56BUMGB5HE4KN.SMALL.jpg TB0J0VYGB5HE4KP mikeasaurus NY Times correspondent Amy Harmon chats with Bina48, a robot based on a researcher for artificial intelligence. The robot 'lives' a the Terasem Movement Foundation, Inc, located in Vermont. The robot comes complete with a database of memories for conversation, a peculiar speech cadence and creepy e...
By: mikeasaurus

Continue Reading »]]> technology Wed, 14 Jul 2010 09:00:47 PDT http://www.instructables.com/id/Build-an-analog-vocoder/
Build an analog vocoder - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYJ/1GAU/FXK6BCC5/FYJ1GAUFXK6BCC5.SQUARE2.jpg http://img.instructables.com/files/deriv/FYJ/1GAU/FXK6BCC5/FYJ1GAUFXK6BCC5.SQUARE.jpg http://img.instructables.com/files/deriv/FYJ/1GAU/FXK6BCC5/FYJ1GAUFXK6BCC5.SMALL.jpg E8N9L8AFXK6B9NC planetone This is my first Instructable and my first attempt at such a large electronics project. I designed the circuit from scratch and I am making it available to all so anyone interested can build their own. I have called it the Morphatron. I will not say it is a piece of cake, but I have done most of ...
By: planetone

Continue Reading »]]> technology Sun, 26 Jul 2009 23:55:11 PDT http://www.instructables.com/id/Hexabot-Build-a-heavy-duty-six-legged-robot/
Hexabot: Build a heavy duty six-legged robot! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FX1/CH4V/FOHTTYRG/FX1CH4VFOHTTYRG.SQUARE2.jpg http://img.instructables.com/files/deriv/FX1/CH4V/FOHTTYRG/FX1CH4VFOHTTYRG.SQUARE.jpg http://img.instructables.com/files/deriv/FX1/CH4V/FOHTTYRG/FX1CH4VFOHTTYRG.SMALL.jpg E6BPLRMFOHU39TF rpantaleo This Instructable is going to show you how to build Hexabot, a large six-legged robot platform that is capable of carrying a human passenger! The robot can also be made fully autonomous with the addition of a few sensors and a little reprogramming.I constructed this robot as a final project for Maki...
By: rpantaleo

Continue Reading »]]> technology Sun, 14 Dec 2008 19:46:42 PST http://www.instructables.com/id/How-to-build-a-wireless-hexapod-robot/
How to build a wireless hexapod robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F9M/533N/GAA0WY8T/F9M533NGAA0WY8T.SQUARE2.jpg http://img.instructables.com/files/deriv/F9M/533N/GAA0WY8T/F9M533NGAA0WY8T.SQUARE.jpg http://img.instructables.com/files/deriv/F9M/533N/GAA0WY8T/F9M533NGAA0WY8T.SMALL.jpg ECAGA81GAA0WY8R aggrav8d Here's a video of it in action. Facebook page so you can keep up to date on v2 Have you completed this instructable?  Send me pictures and I'll add it on this page! When completed, you will have a walking robot that is about 2 feet wide and stands as much as a foot tall.  It has lots of room for ...
By: aggrav8d

Continue Reading »]]> technology Sat, 12 Jun 2010 13:27:50 PDT http://www.instructables.com/id/Hexapod-robot-instructables-coming-soon/ http://img.instructables.com/files/deriv/FDV/PNEG/GAA12GNK/FDVPNEGGAA12GNK.SQUARE2.jpg http://img.instructables.com/files/deriv/FDV/PNEG/GAA12GNK/FDVPNEGGAA12GNK.SQUARE.jpg http://img.instructables.com/files/deriv/FDV/PNEG/GAA12GNK/FDVPNEGGAA12GNK.SMALL.jpg E6DCX01GAA12GNJ aggrav8d I built an open source, arduino-based, bluetooth hexapod robot.  I currently drive it from my PC simulator (also open source).  I'm trying to figure out how to drive it with Android phones, iPhones, PS3 remotes, and Wii remotes.  I'm also writing assembly instructions because I would like to sell th...
By: aggrav8d

Continue Reading »]]> technology Fri, 11 Jun 2010 10:37:10 PDT http://www.instructables.com/id/How-to-Build-a-Robot-The-BeetleBot-v2-Revisite/
How to Build a Robot - The BeetleBot v2 ( Revisited ) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0H/9MB8/FHY0HAKC/F0H9MB8FHY0HAKC.SQUARE2.jpg http://img.instructables.com/files/deriv/F0H/9MB8/FHY0HAKC/F0H9MB8FHY0HAKC.SQUARE.jpg http://img.instructables.com/files/deriv/F0H/9MB8/FHY0HAKC/F0H9MB8FHY0HAKC.SMALL.jpg EDE306IFHOI1Y3G robomaniac This is the beetle robot instructables revisited a la MythBusters style! I originally made a instructables about my beetle robot version 1. It is now time to show you a new version of this wonderful robot. This new version is much easier to build and fool proof! The beetle robot (Beetle bot), is a...
By: robomaniac

Continue Reading »]]> technology Tue, 1 Jul 2008 18:46:15 PDT http://www.instructables.com/id/The-Most-Useless-Machine/
The Most Useless Machine EVER! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6Z/ZPIF/G5KPASY0/F6ZZPIFG5KPASY0.SQUARE2.jpg http://img.instructables.com/files/deriv/F6Z/ZPIF/G5KPASY0/F6ZZPIFG5KPASY0.SQUARE.jpg http://img.instructables.com/files/deriv/F6Z/ZPIF/G5KPASY0/F6ZZPIFG5KPASY0.SMALL.jpg EPWHHIMG3KYBFN3 Frivolous Engineering And yet everyone wants one!!!? Version 2 Kits available: FrivolousEngineering.com Update June 8, 2010: AS SEEN ON TV! Make Magazine's amiable editor-in-chief, Mark Frauenfelder demonstrated The Useless Machine on the Colbert Report! Update July 22, 2010: Useless Machine Featured in Vol 23 of Mak...
By: Frivolous Engineering

Continue Reading »]]> technology Tue, 29 Dec 2009 17:21:53 PST http://www.instructables.com/id/3-Axis-CNC-Router---60x60x5---JunkBot/
3 Axis CNC Router - 60"x60"x5" - JunkBot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SQUARE2.jpg http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SQUARE.jpg http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SMALL.jpg EEEI8XOFAQEDKRU russaanderson This Instructable is the first in a series documenting the construction of a DIY 3 axis CNC router. This is also my entry for the Universal Laser Cutter Contest.The goal of this Instructable is not to show a full step by step progression but rather to pass along my experiences with making my own CNC...
By: russaanderson

Continue Reading »]]> technology Tue, 1 Jan 2008 23:56:07 PST http://www.instructables.com/id/Make-a-wall-avoiding-Robot!/
Make a wall avoiding Robot! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F01/13Y1/F4IXDUU2/F0113Y1F4IXDUU2.SQUARE2.jpg http://img.instructables.com/files/deriv/F01/13Y1/F4IXDUU2/F0113Y1F4IXDUU2.SQUARE.jpg http://img.instructables.com/files/deriv/F01/13Y1/F4IXDUU2/F0113Y1F4IXDUU2.SMALL.jpg EXDGV5CF36FEUOP Brandon121233 Objective: To create from scratch a working robot that is able to avoid walls and obstacles. Ever wanted to make a robot that could actually do something, but never had the time or knowledge to do it? Fear no more, this instructable is just for you! I will show you step by step how to make all the n...
By: Brandon121233

Continue Reading »]]> technology Sat, 23 Jun 2007 22:27:18 PDT http://www.instructables.com/id/How-to-make-your-first-robot-an-actual-programma/
Your first real robot the easy way, learn all the basics while at it :) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FAG/MEGN/G9628E6D/FAGMEGNG9628E6D.SQUARE2.jpg http://img.instructables.com/files/deriv/FAG/MEGN/G9628E6D/FAGMEGNG9628E6D.SQUARE.jpg http://img.instructables.com/files/deriv/FAG/MEGN/G9628E6D/FAGMEGNG9628E6D.SMALL.jpg EE0DRURG9628E5V fritsl This tutorial is the easiest way in the world to give you a fast start into building robots. And so, it is very easy! This is an updated version, the original can be found here: The original instructions Welcome :) Everything here is so easy, that after you have gone through it, you ...
By: fritsl

Continue Reading »]]> technology Mon, 17 May 2010 05:13:08 PDT http://www.instructables.com/id/Easy-build-self-balancing-skateboardrobotsegway-/
Easy build self balancing electric skateboard - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYZ/TUHP/H0KL0NYT/FYZTUHPH0KL0NYT.SQUARE2.jpg http://img.instructables.com/files/deriv/FYZ/TUHP/H0KL0NYT/FYZTUHPH0KL0NYT.SQUARE.jpg http://img.instructables.com/files/deriv/FYZ/TUHP/H0KL0NYT/FYZTUHPH0KL0NYT.SMALL.jpg E3C1NR6G6MPQ5EM XenonJohn What is it? Twin wheeled skateboard that works like a Segway.  Electric skateboard exist already - motors on rear wheels. The plan here was to build something like a Segway but in the form of a skateboard. It knows which way is "up" via a combination of gyroscope and an accelerometer sensors, usi...
By: XenonJohn

Continue Reading »]]> technology Sat, 20 Mar 2010 12:24:27 PDT http://www.instructables.com/id/Simple-Animatronic-robotic-hand-made-of-Chain/ http://img.instructables.com/files/deriv/FA5/YXGY/G5V2TGUT/FA5YXGYG5V2TGUT.SQUARE2.jpg http://img.instructables.com/files/deriv/FA5/YXGY/G5V2TGUT/FA5YXGYG5V2TGUT.SQUARE.jpg http://img.instructables.com/files/deriv/FA5/YXGY/G5V2TGUT/FA5YXGYG5V2TGUT.SMALL.jpg EQLWGOYG5V2TGUO r570sv This is very similar to: http://www.instructables.com/id/Simple-Animatronics-robotic-hand/ I was originally going to build this as the link recommended - but I hate glue, tape and plastic.  I want it welded/brazed/bolted together so I opted for what you see in the picture.  Took quite a few tips ...
By: r570sv

Continue Reading »]]> technology Fri, 19 Feb 2010 18:53:46 PST http://www.instructables.com/id/The-Carpet-Crawler-A-BEAM-Robot/
The Carpet Crawler - A BEAM Robot. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJZ/POLV/G5703OP3/FJZPOLVG5703OP3.SQUARE2.jpg http://img.instructables.com/files/deriv/FJZ/POLV/G5703OP3/FJZPOLVG5703OP3.SQUARE.jpg http://img.instructables.com/files/deriv/FJZ/POLV/G5703OP3/FJZPOLVG5703OP3.SMALL.jpg EC1IJ02G4PBSOKS AndyGadget    The Carpet Crawler is a small robot which will shuffle its way across your floor.  Watch the video, and you will see how it got its name (that, and I'm an old prog rock fan at heart!).  BEAM stands for Biology, Electronics, Aesthetics, Mechanics, and is a school of robot design working on the ...
By: AndyGadget

Continue Reading »]]> technology Tue, 2 Feb 2010 15:22:43 PST http://www.instructables.com/id/The-Easter-Solar-Engine/
The Easter Solar Engine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGQ/7DMH/G2L3BUY8/FGQ7DMHG2L3BUY8.SQUARE2.jpg http://img.instructables.com/files/deriv/FGQ/7DMH/G2L3BUY8/FGQ7DMHG2L3BUY8.SQUARE.jpg http://img.instructables.com/files/deriv/FGQ/7DMH/G2L3BUY8/FGQ7DMHG2L3BUY8.SMALL.jpg EZJ20U2G1QWAV44 TinkerJim A Solar Engine is a circuit that takes in and stores electrical energy from solar cells, and when a predetermined amount has accumulated, it switches on to drive a motor or other actuator.  A solar engine is not really an 'engine' in itself, but that is its name by established usage.  It does provid...
By: TinkerJim

Continue Reading »]]> technology Sun, 3 Jan 2010 10:58:32 PST http://www.instructables.com/id/Robot-Christmas-Ornament/
Robot Christmas Ornament - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FG2/3F95/G3TDV6WU/FG23F95G3TDV6WU.SQUARE2.jpg http://img.instructables.com/files/deriv/FG2/3F95/G3TDV6WU/FG23F95G3TDV6WU.SQUARE.jpg http://img.instructables.com/files/deriv/FG2/3F95/G3TDV6WU/FG23F95G3TDV6WU.SMALL.jpg EYDPD17G3KYAWN3 yokozuna I had been rolling this idea around in my head for quite a while- Robot Action Figures made from pop/soda cans.  When the Christmas contest was announced, I knew the time was right.  I altered my plans slightly to make my action figure into a Christmas ornament instead.  What's the difference betwee...
By: yokozuna

Continue Reading »]]> technology Sun, 27 Dec 2009 13:30:28 PST http://www.instructables.com/id/First-Ever-Real-Gingerbread-Autonomous-Robot-unv/ http://img.instructables.com/files/deriv/FA6/YZDJ/G3E242SU/FA6YZDJG3E242SU.SQUARE2.jpg http://img.instructables.com/files/deriv/FA6/YZDJ/G3E242SU/FA6YZDJG3E242SU.SQUARE.jpg http://img.instructables.com/files/deriv/FA6/YZDJ/G3E242SU/FA6YZDJG3E242SU.SMALL.jpg EUHBY04G3E2CGND iculus Two engineers should not be left alone during a snow storm with gingerbread and a microcontroller.  The following documents our results: This is an autonomous cliff sensing gingerbread robot, commonly referred to as "Ginger."  The Gingerbread was fabricated using a food network recipe, and the part...
By: iculus

Continue Reading »]]> technology Sun, 20 Dec 2009 20:08:42 PST http://www.instructables.com/id/How-to-make-air-muscles!/
How to make air muscles! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7J/FH9O/F5Y3YRHB/F7JFH9OF5Y3YRHB.SQUARE2.jpg http://img.instructables.com/files/deriv/F7J/FH9O/F5Y3YRHB/F7JFH9OF5Y3YRHB.SQUARE.jpg http://img.instructables.com/files/deriv/F7J/FH9O/F5Y3YRHB/F7JFH9OF5Y3YRHB.SMALL.jpg E7AWB1LF5Y3YRJE Honus I needed to create some actuators for an animatronics project I'm working on. Air muscles are very powerful actuators that work very similar to a human muscle and have a phenomenal strength to weight ratio- they can exert a pulling force up to 400 times their own weight. They will work when twisted ...
By: Honus

Continue Reading »]]> technology Sat, 1 Sep 2007 22:04:47 PDT http://www.instructables.com/id/Instructable-robot-jewelry/
Instructable robot jewelry - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5K/N08A/G23UTOJ8/F5KN08AG23UTOJ8.SQUARE2.jpg http://img.instructables.com/files/deriv/F5K/N08A/G23UTOJ8/F5KN08AG23UTOJ8.SQUARE.jpg http://img.instructables.com/files/deriv/F5K/N08A/G23UTOJ8/F5KN08AG23UTOJ8.SMALL.jpg ER2O9BYG23UTOHW dorseykm  This is a guide to how you can make your own instructable robot jewelry with permanent markers, an oven and #6 recyclable material. Acquire the robot image  Download a copy of the instructable robot.  It's okay if it's bigger or smaller than the one you use for your jewelry because you can resiz...
By: dorseykm

Continue Reading »]]> technology Mon, 16 Nov 2009 21:26:49 PST http://www.instructables.com/id/Build-an-Arduino-powered-talking-robot-head/
Build an Arduino-powered talking robot head! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FY2/3Z66/G0AMFH75/FY23Z66G0AMFH75.SQUARE2.jpg http://img.instructables.com/files/deriv/FY2/3Z66/G0AMFH75/FY23Z66G0AMFH75.SQUARE.jpg http://img.instructables.com/files/deriv/FY2/3Z66/G0AMFH75/FY23Z66G0AMFH75.SMALL.jpg ET5EIZXG0AMJB1R xtremd This robot head was originally built as a end of the year project for my physical computing class, but over the summer it has "learned" how to talk.The head is powered by two Freeduinos, 3 TLC5940NT chips and an Adafruit Industries Wave Shield found here: www.ladyada.net/make/waveshield/. The head i...
By: xtremd

Continue Reading »]]> technology Wed, 11 Nov 2009 12:22:46 PST http://www.instructables.com/id/Ghetto-Programming%3a-Getting-started-with-AVR-micro/
Ghetto Programming: Getting started with AVR microprocessors on the cheap. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJI/TNEC/C8MEUKIKV6Y/FJITNECC8MEUKIKV6Y.SQUARE2.jpg http://img.instructables.com/files/deriv/FJI/TNEC/C8MEUKIKV6Y/FJITNECC8MEUKIKV6Y.SQUARE.jpg http://img.instructables.com/files/deriv/FJI/TNEC/C8MEUKIKV6Y/FJITNECC8MEUKIKV6Y.SMALL.jpg E5H5UDWB5UEUKIKV8V The Real Elliot Microprocessors are so cheap these days. If only there were a way to program them up just as cheaply... *wavy dream-sequence lines*In this instructable, find out how to build up a complete AVR microprocessor toolchain: compiler, programmer software, programmer hardware, and some simple demos to get...
By: The Real Elliot

Continue Reading »]]> technology Sat, 18 Nov 2006 16:17:43 PST http://www.instructables.com/id/Desktop-Decepticon-A-Transformers-Maquette/
Desktop Decepticon: A Transformers Maquette - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FE3/L1QI/G145RCGJ/FE3L1QIG145RCGJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FE3/L1QI/G145RCGJ/FE3L1QIG145RCGJ.SQUARE.jpg http://img.instructables.com/files/deriv/FE3/L1QI/G145RCGJ/FE3L1QIG145RCGJ.SMALL.jpg E2RW7M1G0ZWL7NZ gingerpete50 Here is another little project I've been working on for a while, I've just got around to finishing it finally! After really enjoying the first Transformers movie, I wanted to try and make a little Transformer model but didn't get round to it. Once the second movie came out I thought it was about tim...
By: gingerpete50

Continue Reading »]]> technology Fri, 23 Oct 2009 10:36:24 PDT http://www.instructables.com/id/Simple-Servo-Tester/
Simple Servo Tester - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1X/DFB6/G068M02D/F1XDFB6G068M02D.SQUARE2.jpg http://img.instructables.com/files/deriv/F1X/DFB6/G068M02D/F1XDFB6G068M02D.SQUARE.jpg http://img.instructables.com/files/deriv/F1X/DFB6/G068M02D/F1XDFB6G068M02D.SMALL.jpg E4FZEFZG068LZZR Gadget Gangster A little bigger than a postage stamp, the Simple Servo Tester lets you control two digital or analog servos without using a transmitter or receiver, just plug in your battery pack to start testing. Use it to check your servos before installing them into your models or to center your servos when set...
By: Gadget Gangster

Continue Reading »]]> technology Wed, 30 Sep 2009 11:37:31 PDT http://www.instructables.com/id/Fairy-Juicing-Cocktail-Robot/
Fairy Juicing Cocktail Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1P/GE1N/FYTCLV72/F1PGE1NFYTCLV72.SQUARE2.jpg http://img.instructables.com/files/deriv/F1P/GE1N/FYTCLV72/F1PGE1NFYTCLV72.SQUARE.jpg http://img.instructables.com/files/deriv/F1P/GE1N/FYTCLV72/F1PGE1NFYTCLV72.SMALL.jpg E7E4FG0FXA3000P numberandom This project was built for the 2008 Roboexotica conference in Vienna, Austria where it tied for first place in the drink serving category. Here's how it was made! Story Our delicious fresh fairies are hand-captured from only the finest wormwood forests of Northern Europe. We take extreme pride in...
By: numberandom

Continue Reading »]]> technology Fri, 18 Sep 2009 06:06:35 PDT http://www.instructables.com/id/Motor-controller/
Motor controller - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FA4/ETXO/GK2EP27QH87/FA4ETXOGK2EP27QH87.SQUARE2.jpg http://img.instructables.com/files/deriv/FA4/ETXO/GK2EP27QH87/FA4ETXOGK2EP27QH87.SQUARE.jpg http://img.instructables.com/files/deriv/FA4/ETXO/GK2EP27QH87/FA4ETXOGK2EP27QH87.SMALL.jpg E8TVBQMN4NEP285Z27 ewilhelm A 6 motor controller board using LMD18200 chips. Requirements Determine your requirements. The LMD18200s can switch 3A at 55 V. The project, my undergraduate thesis, that used this motor controller board included 6 servo-motors that only required a couple hundred milliamps at 12 V.The thesis wa...
By: ewilhelm

Continue Reading »]]> technology Thu, 4 Aug 2005 17:10:30 PDT http://www.instructables.com/id/The-Glueless-Poseable-Cardboard-Robot/
The Glueless, Poseable Cardboard Robot. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0C/ESKF/FYYNDRPQ/F0CESKFFYYNDRPQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F0C/ESKF/FYYNDRPQ/F0CESKFFYYNDRPQ.SQUARE.jpg http://img.instructables.com/files/deriv/F0C/ESKF/FYYNDRPQ/F0CESKFFYYNDRPQ.SMALL.jpg EAHKNFLFYYNDQZ0 Kiteman OK, maybe not such a good idea for a contest organised by a glue manufacturer, but I was inspired.The whole model is held together with friction, but is (fairly) poseable....and it has claws! Materials and tools Most of the robot's body is built of corrugated card, but the forearms and claws are ...
By: Kiteman

Continue Reading »]]> technology Sun, 30 Aug 2009 15:40:21 PDT http://www.instructables.com/id/How-to-make-a-RockBand-Guitar-playing-Robot/
How to make a RockBand Guitar playing Robot! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL6/BAI1/FXHJY3CL/FL6BAI1FXHJY3CL.SQUARE2.jpg http://img.instructables.com/files/deriv/FL6/BAI1/FXHJY3CL/FL6BAI1FXHJY3CL.SQUARE.jpg http://img.instructables.com/files/deriv/FL6/BAI1/FXHJY3CL/FL6BAI1FXHJY3CL.SMALL.jpg EUXYECVFXHJXSZS kendallickes For my first instructable...What can I say, I love to drum away on the rockband set but it's rare that I have someone to play with me; maybe I need more friends, but out of my seemingly lonely life(jk) comes a pretty cool intractable. I have designed a robot that plays the Rockband guitar for me an...
By: kendallickes

Continue Reading »]]> technology Sat, 25 Jul 2009 08:05:21 PDT http://www.instructables.com/id/Pocket-Drunken-Robot/
Pocket Drunken Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJP/0732/FXA2Z0YG/FJP0732FXA2Z0YG.SQUARE2.jpg http://img.instructables.com/files/deriv/FJP/0732/FXA2Z0YG/FJP0732FXA2Z0YG.SQUARE.jpg http://img.instructables.com/files/deriv/FJP/0732/FXA2Z0YG/FJP0732FXA2Z0YG.SMALL.jpg EASIEW7FWS6LNJY Grathio   Parts and Tools Here's the parts you'll need to make one pocket-sized drunken robot. But make more than one since it's no fun to drink alone. Parts 1 vibrator motor from a pager or cell phone. (I used these. You can find the same motor here and here, though it seems distributors ke...
By: Grathio

Continue Reading »]]> technology Sat, 18 Jul 2009 23:31:57 PDT http://www.instructables.com/id/Servo-Controlled-Marble-Maze/
Servo Controlled Marble Maze - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6A/U801/FWYHT9JR/F6AU801FWYHT9JR.SQUARE2.jpg http://img.instructables.com/files/deriv/F6A/U801/FWYHT9JR/F6AU801FWYHT9JR.SQUARE.jpg http://img.instructables.com/files/deriv/F6A/U801/FWYHT9JR/F6AU801FWYHT9JR.SMALL.jpg E5IBW8SFWYHW3MP CarlS This is version of the classic marble labyrinth, where the pan and tilt are controlled by hobby servos. With the servos, you can work the maze with an R/C controller or a PC etc. We built this one to be used with TeleToyland, and you can try it out live at the TeleToyland Marble Maze, and a secon...
By: CarlS

Continue Reading »]]> technology Mon, 13 Jul 2009 22:08:44 PDT http://www.instructables.com/id/Build-a-Very-Small-Robot-Make-The-Worlds-Smalles/
Build a Very Small Robot: Make The World's Smallest Wheeled Robot With A Gripper. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZP/D01N/FWMNUBNE/FZPD01NFWMNUBNE.SQUARE2.jpg http://img.instructables.com/files/deriv/FZP/D01N/FWMNUBNE/FZPD01NFWMNUBNE.SQUARE.jpg http://img.instructables.com/files/deriv/FZP/D01N/FWMNUBNE/FZPD01NFWMNUBNE.SMALL.jpg EN1VMRCFWMNUBNA mikey77 Build a 1/20 cubic inch robot with a gripper that can pick up and move small objects. It is controlled by a Picaxe microcontroller. At this point in time, I believe this may be the world's smallest wheeled robot with a gripper. That will no doubt change, tomorrow or next week, when someone builds so...
By: mikey77

Continue Reading »]]> technology Thu, 2 Jul 2009 16:23:18 PDT http://www.instructables.com/id/How-to-Steal-an-Instructable/
How to Steal an Instructable - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQF/0VLN/FU6LW6BP/FQF0VLNFU6LW6BP.SQUARE2.jpg http://img.instructables.com/files/deriv/FQF/0VLN/FU6LW6BP/FQF0VLNFU6LW6BP.SQUARE.jpg http://img.instructables.com/files/deriv/FQF/0VLN/FU6LW6BP/FQF0VLNFU6LW6BP.SMALL.jpg EHQFNGFFTY4C16V yokozuna Stealing Instructables is a time-honored method of receiving acclaim and attention that lazy people would not otherwise receive. Plus, you can email your friends who would not normally visit the website and show them all the excellent work you've done, and they'll never know the difference. They'l...
By: yokozuna

Continue Reading »]]> technology Thu, 30 Apr 2009 17:05:41 PDT http://www.instructables.com/id/Push-Start-a-Comatose-Furby/
Push-Start a Comatose Furby - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMS/UDXE/FVDBZR0P/FMSUDXEFVDBZR0P.SQUARE2.jpg http://img.instructables.com/files/deriv/FMS/UDXE/FVDBZR0P/FMSUDXEFVDBZR0P.SQUARE.jpg http://img.instructables.com/files/deriv/FMS/UDXE/FVDBZR0P/FMSUDXEFVDBZR0P.SMALL.jpg E8YVQQGFVDBZQZA lambsb We've all been there. Invert. Jiggle. Shake. Slap. Nothing. When a Furby goes comatose, there seems to be no hope of getting him or her awakened. This Instructable will show the steps to take Furby apart and push start him back to life. This has worked on my own two so far and will likely wo...
By: lambsb

Continue Reading »]]> technology Tue, 2 Jun 2009 11:18:14 PDT http://www.instructables.com/id/No-Solder-Funny-Robot-in-Minutes/
No-Solder, Funny Robot in Minutes (Bristlebot) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLP/AL2R/FUNOX5XQ/FLPAL2RFUNOX5XQ.SQUARE2.jpg http://img.instructables.com/files/deriv/FLP/AL2R/FUNOX5XQ/FLPAL2RFUNOX5XQ.SQUARE.jpg http://img.instructables.com/files/deriv/FLP/AL2R/FUNOX5XQ/FLPAL2RFUNOX5XQ.SMALL.jpg EC824PIFUPUPEW5 laxap Summary: Build a cheap robot with no soldering, no programming, and no mechanical work. It is built on a dishwashing brush. To move forward, it will use the vibrations transmitted asymmetrically by the skew of the bristles. I saw such a robot at the robotics festival of the Swiss Federal Institute ...
By: laxap

Continue Reading »]]> technology Sun, 17 May 2009 13:46:28 PDT http://www.instructables.com/id/Instructibles-Robot/
Instructables Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FH7/7NWM/FUNOWQ0R/FH77NWMFUNOWQ0R.SQUARE2.jpg http://img.instructables.com/files/deriv/FH7/7NWM/FUNOWQ0R/FH77NWMFUNOWQ0R.SQUARE.jpg http://img.instructables.com/files/deriv/FH7/7NWM/FUNOWQ0R/FH77NWMFUNOWQ0R.SMALL.jpg E9921A8FUNOWQ0V Emsaid In this instructible I will show you how to make a Mother's Day robot. There is a picture posted of the cloth pieces that you will need. You will also need the following: Yellow Felt Red Felt Thread (yellow, red, and black) Scissors Sewing Machine (not needed but really helpful) Stuffing A Needle ...
By: Emsaid

Continue Reading »]]> technology Thu, 14 May 2009 20:28:03 PDT http://www.instructables.com/id/Balancing-Robot/
Balancing Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZT/MEA4/FJMBXQP3/FZTMEA4FJMBXQP3.SQUARE2.jpg http://img.instructables.com/files/deriv/FZT/MEA4/FJMBXQP3/FZTMEA4FJMBXQP3.SQUARE.jpg http://img.instructables.com/files/deriv/FZT/MEA4/FJMBXQP3/FZTMEA4FJMBXQP3.SMALL.jpg EV5PZXTFJMBXQPV vahid_you2004 This is a very simple robot that uses a simple switch as a sensor and stands on only two wheels with inverted pendulum mechanism. When the robot is going to fall the motor starts and moves the robot to the direction it is going to fall, so the motor torque about the center of gravity that is higher ...
By: vahid_you2004

Continue Reading »]]> technology Sun, 10 Aug 2008 11:06:41 PDT http://www.instructables.com/id/How-to-Make-an-Avant-Garde-Robot-Mask/
How to Make an Avant-Garde Robot Mask - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FU0/G5E7/FT7PROY4/FU0G5E7FT7PROY4.SQUARE2.jpg http://img.instructables.com/files/deriv/FU0/G5E7/FT7PROY4/FU0G5E7FT7PROY4.SQUARE.jpg http://img.instructables.com/files/deriv/FU0/G5E7/FT7PROY4/FU0G5E7FT7PROY4.SMALL.jpg EHSFO8NFT7PRO9X astrideanderson Make a creepy robot plaster mask... without using Vaseline! Pose as a mannequin in shop windows, or hide in a closet and scare your friends. Materials What you'll need for this project:Plaster cloth rollScissorsWaterAluminum FoilToilet PaperWaterGlue (Elmer's)PaintDuct Tape Making the Plaster M...
By: astrideanderson

Continue Reading »]]> technology Mon, 13 Apr 2009 13:55:30 PDT http://www.instructables.com/id/The-Best-of-Instructables-Volume-1/ http://img.instructables.com/files/deriv/FKP/QIV2/FSSIKTZ2/FKPQIV2FSSIKTZ2.SQUARE2.jpg http://img.instructables.com/files/deriv/FKP/QIV2/FSSIKTZ2/FKPQIV2FSSIKTZ2.SQUARE.jpg http://img.instructables.com/files/deriv/FKP/QIV2/FSSIKTZ2/FKPQIV2FSSIKTZ2.SMALL.jpg ODPXRXVFT7PJXQ9 StumpChunkman The Best of Instructables Volume 1Instructables is a place where artists, bicyclists, crafters, engineers, modders, cooks, tinkerers, and techies gather to share advice and ideas freely, and post thousands of their fantastic projects. We're excited to finally bring you the best of Instructables in ...
By: StumpChunkman

Continue Reading »]]> technology Tue, 7 Apr 2009 16:30:44 PDT http://www.instructables.com/id/So-you-want-to-build-a-giant-robot/
So you want to build a giant robot. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FC5/D37E/FSMT01RC/FC5D37EFSMT01RC.SQUARE2.jpg http://img.instructables.com/files/deriv/FC5/D37E/FSMT01RC/FC5D37EFSMT01RC.SQUARE.jpg http://img.instructables.com/files/deriv/FC5/D37E/FSMT01RC/FC5D37EFSMT01RC.SMALL.jpg EEILI9JFSMSY6O3 Dhuynh You say you want to build a giant robot? What is your purpose? World domination? Your girlfriend wont get that beer for you? Whatever it is, here is how to get started on building yourself a robot.The purpose of this robot was for a stage prop for my friends and I 4th annual ROBOT PIRATE NINJA party...
By: Dhuynh

Continue Reading »]]> technology Wed, 25 Mar 2009 10:17:53 PDT http://www.instructables.com/id/Table-top-energy-seed/
Desktop energy seed lamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUM/US73/FSFOIP2L/FUMUS73FSFOIP2L.SQUARE2.jpg http://img.instructables.com/files/deriv/FUM/US73/FSFOIP2L/FUMUS73FSFOIP2L.SQUARE.jpg http://img.instructables.com/files/deriv/FUM/US73/FSFOIP2L/FUMUS73FSFOIP2L.SMALL.jpg E5T7PSTFSE8MIIR robomaniac Hello everyone,Today I will show you something very interesting. It is not a killing robot or skynet (not yet).It is a desktop ambiant light that use dead alkaline battery to power itself. This design can hold up to 15 batteries. It use a single joules thief circuit to power 50 LED! The idea came wh...
By: robomaniac

Continue Reading »]]> technology Fri, 20 Mar 2009 12:26:43 PDT http://www.instructables.com/id/Robot-Racer/
Robot Racer - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F73/EMIY/FRXW6FT4/F73EMIYFRXW6FT4.SQUARE2.jpg http://img.instructables.com/files/deriv/F73/EMIY/FRXW6FT4/F73EMIYFRXW6FT4.SQUARE.jpg http://img.instructables.com/files/deriv/F73/EMIY/FRXW6FT4/F73EMIYFRXW6FT4.SMALL.jpg EPVEXBOFRXWH76B =SMART= Hi, Welcome to my instructable !In this instructable i will show you how to build a Robot Racer !The robot racer is a fast, fun, easy-to-build elastic band car.The car uses recycled tubes, bottle tops and even recycled elastic bands.If you skim through this instructable and like it, it is entered in...
By: =SMART=

Continue Reading »]]> technology Fri, 20 Mar 2009 01:12:18 PDT http://www.instructables.com/id/Instructables-Robot-Figurine/
Instructables Robot Figurine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FVQ/2S39/FRXUSJUR/FVQ2S39FRXUSJUR.SQUARE2.jpg http://img.instructables.com/files/deriv/FVQ/2S39/FRXUSJUR/FVQ2S39FRXUSJUR.SQUARE.jpg http://img.instructables.com/files/deriv/FVQ/2S39/FRXUSJUR/FVQ2S39FRXUSJUR.SMALL.jpg EJ3NIRCFRXUSDT3 Sunbanks I don't know about you, but I sure think it would be AWESOME to have an Instructables robot figurine. Actually, I bet you think it would be awesome too. So here's how to make one. :D Materials You can get most of these things at Walmart for pretty cheap.Things you'll need for sureGreen foam flor...
By: Sunbanks

Continue Reading »]]> technology Sat, 7 Mar 2009 15:03:20 PST http://www.instructables.com/id/Super-Simple-Beginners-Robot/
Super Simple Beginners Robot! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FSO/VE5X/FR123A3Q/FSOVE5XFR123A3Q.SQUARE2.jpg http://img.instructables.com/files/deriv/FSO/VE5X/FR123A3Q/FSOVE5XFR123A3Q.SQUARE.jpg http://img.instructables.com/files/deriv/FSO/VE5X/FR123A3Q/FSOVE5XFR123A3Q.SMALL.jpg E8N11AOFR123A1R BIGBUG '''ROBOT VIDEO''' Here is an offsite link to the video while YouTube is processing the embedded version... I created this Instructable for the absolute n00by robot wannabe. I have noticed a huge jump in the number of beginners getting into the hobby and the number of "how do I" questions seem ...
By: BIGBUG

Continue Reading »]]> technology Sat, 14 Feb 2009 16:19:27 PST http://www.instructables.com/id/Robo-Blanket-Crochet-a-blanket-using-a-cross-stit/
Robo Blanket: Crochet a blanket using a cross stitch pattern. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FW8/FKND/FQCTINNC/FW8FKNDFQCTINNC.SQUARE2.jpg http://img.instructables.com/files/deriv/FW8/FKND/FQCTINNC/FW8FKNDFQCTINNC.SQUARE.jpg http://img.instructables.com/files/deriv/FW8/FKND/FQCTINNC/FW8FKNDFQCTINNC.SMALL.jpg EWCPSSHFQCTKTOS domestic_engineer I like crocheting. I've been doing it since I was little. But just recently I've discovered how to crochet pictures. Now I'll show you how. You will need:Yarn in different colors. A Cross Stitch patternA crochet hook. (I used size H)You can get cross stitch patterns of anything, and you can even mak...
By: domestic_engineer

Continue Reading »]]> technology Mon, 26 Jan 2009 05:31:11 PST http://www.instructables.com/id/Build-A-Mobile-Bar-BaR2D2/
Build A Mobile Bar - BaR2D2 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJL/ZV38/FOVWLXZM/FJLZV38FOVWLXZM.SQUARE2.jpg http://img.instructables.com/files/deriv/FJL/ZV38/FOVWLXZM/FJLZV38FOVWLXZM.SQUARE.jpg http://img.instructables.com/files/deriv/FJL/ZV38/FOVWLXZM/FJLZV38FOVWLXZM.SMALL.jpg EAWACSJFOVWLY0V jamiep BaR2D2 is a radio-controlled, mobile bar that features a motorized beer elevator, motorized ice/mixer drawer, six-bottle shot dispenser, and sound activated neon lighting. The robot is driveable so you can take the party on the road! It was created in my garage using standard hand/power tools and r...
By: jamiep

Continue Reading »]]> technology Fri, 2 Jan 2009 14:21:09 PST http://www.instructables.com/id/Quick-Notebook-PC-Robot-Base/
Quick Notebook PC Robot Base - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1V/Y53V/FN82X0YO/F1VY53VFN82X0YO.SQUARE2.jpg http://img.instructables.com/files/deriv/F1V/Y53V/FN82X0YO/F1VY53VFN82X0YO.SQUARE.jpg http://img.instructables.com/files/deriv/F1V/Y53V/FN82X0YO/F1VY53VFN82X0YO.SMALL.jpg EMCUY7QFN82NYV0 CarlS As a collaboration between TeleToyland and RoboRealm, we built a quick base for a notebook PC based robot using the Parallax Motor Mount & Wheel Kit. For this project, we wanted to keep it quick and simple, and we wanted to leave the top of the robot totally clear for the notebook PC. Hopefully th...
By: CarlS

Continue Reading »]]> technology Tue, 30 Dec 2008 10:03:22 PST http://www.instructables.com/id/Cheap-Easy-Internet-Controlled-Home-Automation-S/
Cheap, Easy, Internet Controlled Home Automation System - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1Z/ANLK/FOWZPD6S/F1ZANLKFOWZPD6S.SQUARE2.jpg http://img.instructables.com/files/deriv/F1Z/ANLK/FOWZPD6S/F1ZANLKFOWZPD6S.SQUARE.jpg http://img.instructables.com/files/deriv/F1Z/ANLK/FOWZPD6S/F1ZANLKFOWZPD6S.SMALL.jpg EE0VMDMFP9CSI6G leevonk If you have pets/children and need to feed them or spank them via the internet this system may be of use to you. It's a very easy and cheap way to control motors, LEDs, etc. at home from any computer connected to the web. All that's needed is a Webcam, Flashlight, Free Software, and about $15 worth...
By: leevonk

Continue Reading »]]> technology Mon, 29 Dec 2008 08:53:19 PST http://www.instructables.com/id/How-to-Control-Your-Robot-Using-a-Wii-Nunchuck-an/
Control Your Robot Using a Wii Nunchuck (and an Arduino) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FVS/PP05/FOHU3N2L/FVSPP05FOHU3N2L.SQUARE2.jpg http://img.instructables.com/files/deriv/FVS/PP05/FOHU3N2L/FVSPP05FOHU3N2L.SQUARE.jpg http://img.instructables.com/files/deriv/FVS/PP05/FOHU3N2L/FVSPP05FOHU3N2L.SMALL.jpg E5W3R6TFOHXBMJL oomlout After wearing myself out playing Wii Boxing I got to thinking wouldn't it be great if I could use this to control my robot, (looking to my left hand). Looking around the internet I found a bevy of people doing similar things, (links to everyone just below the video). So what follows is a re-packag...
By: oomlout

Continue Reading »]]> technology Wed, 17 Dec 2008 07:19:48 PST http://www.instructables.com/id/Instructables-Robot-Projects/ http://img.instructables.com/files/deriv/FFC/0WVD/FOD6UXKN/FFC0WVDFOD6UXKN.SQUARE2.jpg http://img.instructables.com/files/deriv/FFC/0WVD/FOD6UXKN/FFC0WVDFOD6UXKN.SQUARE.jpg http://img.instructables.com/files/deriv/FFC/0WVD/FOD6UXKN/FFC0WVDFOD6UXKN.SMALL.jpg O7UYQECFOD6S1RE Lithium Rain Ah, the instructables robot. He's orange, boxy and very lovable. He enjoys sending email. If you're like us, you just can't get enough of the instructables robot. He's like an addiction. Unfortunately, there is no cure or therapy that can bring one out of this addiction. You just have to feed the c...
By: Lithium Rain

Continue Reading »]]> technology Mon, 8 Dec 2008 16:44:01 PST http://www.instructables.com/id/Low-Cost-Water-Flow-Sensor-and-Ambient-Display/
Low Cost Water Flow Sensor and Ambient Display - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRP/9XEQ/FOHTR2BL/FRP9XEQFOHTR2BL.SQUARE2.jpg http://img.instructables.com/files/deriv/FRP/9XEQ/FOHTR2BL/FRP9XEQFOHTR2BL.SQUARE.jpg http://img.instructables.com/files/deriv/FRP/9XEQ/FOHTR2BL/FRP9XEQFOHTR2BL.SMALL.jpg EK7XPMJFOHU2K6Z staceyk Water is a precious resource. Millions of people do not have access to clean drinking water, and as many as 4000 children die from water contaminated illnesses every day. Yet, we continue to be wasteful with our resources. The overarching goal of this project is to motivate more sustainable water us...
By: staceyk

Continue Reading »]]> technology Mon, 8 Dec 2008 22:27:38 PST http://www.instructables.com/id/Robots/ http://img.instructables.com/files/deriv/F69/MYKJ/FN82NZ5U/F69MYKJFN82NZ5U.SQUARE2.jpg http://img.instructables.com/files/deriv/F69/MYKJ/FN82NZ5U/F69MYKJFN82NZ5U.SQUARE.jpg http://img.instructables.com/files/deriv/F69/MYKJ/FN82NZ5U/F69MYKJFN82NZ5U.SMALL.jpg OMG46KZFN84R0LE Instructables Guides Instructables has nearly endless resources for robot based projects. Whether your hacking up your robotic vacuum or building self replicating robots from scratch, our robot projects will satisfy all of your brain's electronic impulses. You can learn how to build robots by following the easy step-by...
By: Instructables Guides

Continue Reading »]]> technology Wed, 12 Nov 2008 07:10:10 PST http://www.instructables.com/id/Instructables-Holiday-Card/
Instructables Holiday Card - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXX/O6WR/FOD6V2LR/FXXO6WRFOD6V2LR.SQUARE2.jpg http://img.instructables.com/files/deriv/FXX/O6WR/FOD6V2LR/FXXO6WRFOD6V2LR.SQUARE.jpg http://img.instructables.com/files/deriv/FXX/O6WR/FOD6V2LR/FXXO6WRFOD6V2LR.SMALL.jpg E0F9C4UFOD7QKF0 caitlinsdad Not entirely a RoboCard but this is an unofficial official homemade holiday card that Instructables HQ would probably not send to its clients. It is that time of year where we eagerly await the big guy to deliver the things you have been dreaming about all year. You also made sure that he didn't h...
By: caitlinsdad

Continue Reading »]]> technology Sat, 6 Dec 2008 22:54:56 PST http://www.instructables.com/id/Killer-Bunny-Robot-Hat/
Killer Bunny Robot Hat - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYY/JGEF/FNZAHFVE/FYYJGEFFNZAHFVE.SQUARE2.jpg http://img.instructables.com/files/deriv/FYY/JGEF/FNZAHFVE/FYYJGEFFNZAHFVE.SQUARE.jpg http://img.instructables.com/files/deriv/FYY/JGEF/FNZAHFVE/FYYJGEFFNZAHFVE.SMALL.jpg E8W52NWFNNK18EN rachel Cute little bunny hat with KILLER red eyes! Press its little pink nose and the robot eyeballs light up!I made these for a friend, her husband, and their almost-here daughter. Some of the pictures, therefore, show more parts than are needed for one hat, but for simplicity I'm going to write it up a...
By: rachel

Continue Reading »]]> technology Sat, 29 Nov 2008 23:44:04 PST http://www.instructables.com/id/Sparky-DIY-Web-Based-Telepresence-Robot/
Sparky - DIY Web-Based Telepresence Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEK/0433/FMZAA1HJ/FEK0433FMZAA1HJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FEK/0433/FMZAA1HJ/FEK0433FMZAA1HJ.SQUARE.jpg http://img.instructables.com/files/deriv/FEK/0433/FMZAA1HJ/FEK0433FMZAA1HJ.SMALL.jpg EV99DA0FN49ZPY3 sparkyrust The name Sparky is based on an acronym for Self Portrait Artifact Roving Chassis I an awkward title for an art project begun in the early 90s. Since that time Sparky has evolved from an oversized RC toy with a couple of baby monitor video cameras into a fully web-enabled autonomous telepresence ro...
By: sparkyrust

Continue Reading »]]> technology Tue, 4 Nov 2008 23:42:59 PST http://www.instructables.com/id/Build-an-autonomous-Wall-E-Robot/
Build an autonomous Wall-E Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FK0/39U3/FMMCZ2OJ/FK039U3FMMCZ2OJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FK0/39U3/FMMCZ2OJ/FK039U3FMMCZ2OJ.SQUARE.jpg http://img.instructables.com/files/deriv/FK0/39U3/FMMCZ2OJ/FK039U3FMMCZ2OJ.SMALL.jpg EMHPVN5FMMCZ1WC djsures Hi! After a kabillion requests, here you go! This robot is running the EZ-B available at http://www.ez-robot.com First a little introduction, watch the vide: http://www.youtube.com/watch?v=OJiMUzJHYFk I started off with the toy titled "Interactive Wall-E". Available at toys'r'us current price $34....
By: djsures

Continue Reading »]]> technology Mon, 27 Oct 2008 16:11:01 PDT http://www.instructables.com/id/Underwater-ROV/
Underwater ROV - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOU/FDAA/FK75D3IC/FOUFDAAFK75D3IC.SQUARE2.jpg http://img.instructables.com/files/deriv/FOU/FDAA/FK75D3IC/FOUFDAAFK75D3IC.SQUARE.jpg http://img.instructables.com/files/deriv/FOU/FDAA/FK75D3IC/FOUFDAAFK75D3IC.SMALL.jpg E9Z1K7JFHOI1XC9 SpaceShipOne This instructable will show you the process of building a fully functional ROV capable of 60ft or more. I built this ROV with the help of my dad and several other people who have built ROVs before. This was a long project that took al summer and part of the beginning of the school year. Design In...
By: SpaceShipOne

Continue Reading »]]> technology Tue, 23 Sep 2008 16:56:16 PDT http://www.instructables.com/id/Colleggtible-Collectible-Instructables-Eggs/
Collegg'tible - Collectible Instructables Eggs - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRG/KXWP/FL611L31/FRGKXWPFL611L31.SQUARE2.jpg http://img.instructables.com/files/deriv/FRG/KXWP/FL611L31/FRGKXWPFL611L31.SQUARE.jpg http://img.instructables.com/files/deriv/FRG/KXWP/FL611L31/FRGKXWPFL611L31.SMALL.jpg EECXFCMFL611L3L caitlinsdad What makes a perfect gift for the holidays year after year? A set of collectible Instructables Eggs depicting famous and infamous members of the Instructables member community. This year, only one set will be cast and when they are struck, the mold is destroyed, guaranteeing you that these are one ...
By: caitlinsdad

Continue Reading »]]> technology Tue, 16 Sep 2008 21:24:18 PDT http://www.instructables.com/id/How-to-Make-a-Boomerang-The-Robot-Returns-with-th/
How to Make a Boomerang (The Robot Returns with the Dark Kite) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXQ/SK2Y/FKD1HQVL/FXQSK2YFKD1HQVL.SQUARE2.jpg http://img.instructables.com/files/deriv/FXQ/SK2Y/FKD1HQVL/FXQSK2YFKD1HQVL.SQUARE.jpg http://img.instructables.com/files/deriv/FXQ/SK2Y/FKD1HQVL/FXQSK2YFKD1HQVL.SMALL.jpg EGOHV95FK5QTBZP Kiteman I'd never made a boomerang before, so I thought it was about time.This is two boomerang projects in one. The instructions for each are remarkable similar, and you can follow the differences in the notes on the images.Traditional boomerangs have two forms: there are the straight, hunting boomerangs,...
By: Kiteman

Continue Reading »]]> technology Fri, 29 Aug 2008 11:07:51 PDT http://www.instructables.com/id/BOB-V20/
'BOB' V2.0 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2W/LJDJ/FIM95UUK/F2WLJDJFIM95UUK.SQUARE2.jpg http://img.instructables.com/files/deriv/F2W/LJDJ/FIM95UUK/F2WLJDJFIM95UUK.SQUARE.jpg http://img.instructables.com/files/deriv/F2W/LJDJ/FIM95UUK/F2WLJDJFIM95UUK.SMALL.jpg EOLIXHMFIM95UUS mortaldoom780 This is a sequel, so to speak, of the 'Obstacle-Avoiding Robot with a Personality' instructable. In that instructable, I decided to call the robot 'BOB'. BOB had quite a few flaws and drawbacks, so I have now improved BOB in a few ways. (He? It?) now has better:Stamina (improved power system)'Vision...
By: mortaldoom780

Continue Reading »]]> technology Mon, 14 Jul 2008 20:42:32 PDT http://www.instructables.com/id/How-to-build-the-one-motor-walker/
How to build the one motor walker! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0T/66ST/FFRD437D/F0T66STFFRD437D.SQUARE2.jpg http://img.instructables.com/files/deriv/F0T/66ST/FFRD437D/F0T66STFFRD437D.SQUARE.jpg http://img.instructables.com/files/deriv/F0T/66ST/FFRD437D/F0T66STFFRD437D.SMALL.jpg E7NLI5XFFRCP5IC robomaniac Welcome! Here is Instructables on how to build a walker with only one motor! This design is base on the principal of B.E.A.M robotics! Building simple and elegant robot inspired by insect. This robot was build back in 2000 and want to show you how to build it. Beware this is a complex projec...
By: robomaniac

Continue Reading »]]> technology Sat, 12 Jul 2008 15:33:10 PDT http://www.instructables.com/id/How-to-design-and-build-a-combat-robot/
How to design and build a combat robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJP/MP7K/FIHVM2OZ/FJPMP7KFIHVM2OZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FJP/MP7K/FIHVM2OZ/FJPMP7KFIHVM2OZ.SQUARE.jpg http://img.instructables.com/files/deriv/FJP/MP7K/FIHVM2OZ/FJPMP7KFIHVM2OZ.SMALL.jpg E97RYTMFIHVM2O4 gneedel Combat robots have been entertaining and amusing since before they were popular on Comedy Central. A while back I undertook the challenge of building a couple of combat robots (a 30lb and a 220lb). Regardless of the size of the machine the steps in the process are the same. This Instructable will ...
By: gneedel

Continue Reading »]]> technology Sun, 13 Jul 2008 23:59:35 PDT http://www.instructables.com/id/SOCBOT-the-next-generation-vibrobot/
SOCBOT - The Next Generation Vibrobot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6Y/H9II/FIHVM7MB/F6YH9IIFIHVM7MB.SQUARE2.jpg http://img.instructables.com/files/deriv/F6Y/H9II/FIHVM7MB/F6YH9IIFIHVM7MB.SQUARE.jpg http://img.instructables.com/files/deriv/F6Y/H9II/FIHVM7MB/F6YH9IIFIHVM7MB.SMALL.jpg EDO5Y6PFIES3V39 biochemtronics . In the beginning there were pagers. The fact that activated pagers danced their way off of desks and dressers was little more than an aggravation to most people. That changed when it happened in the presence of a maker. Soon after that eureka moment the vibrobot was born. As those early technolog...
By: biochemtronics

Continue Reading »]]> technology Sun, 13 Jul 2008 14:00:48 PDT http://www.instructables.com/id/Robot-Costume-With-LEDs/
Robot Costume With LEDs - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBZ/HCLA/FI36FRKE/FBZHCLAFI36FRKE.SQUARE2.jpg http://img.instructables.com/files/deriv/FBZ/HCLA/FI36FRKE/FBZHCLAFI36FRKE.SQUARE.jpg http://img.instructables.com/files/deriv/FBZ/HCLA/FI36FRKE/FBZHCLAFI36FRKE.SMALL.jpg ERHL060FHW8D2MY joshf The reasons why I wanted to make a robot suit are complex. To make a long story short, I wanted a costume that I could use to entertain my peers while they studiously prepared for final exams. But I didn't want any old costume--I wanted a robot suit, and I wanted a robot suit that would light up.Thu...
By: joshf

Continue Reading »]]> technology Mon, 30 Jun 2008 10:50:39 PDT http://www.instructables.com/id/Robot-from-an-inpropper-engagement-1/ http://img.instructables.com/files/deriv/FM6/4ZYY/FHJMR7JC/FM64ZYYFHJMR7JC.SQUARE2.jpg http://img.instructables.com/files/deriv/FM6/4ZYY/FHJMR7JC/FM64ZYYFHJMR7JC.SQUARE.jpg http://img.instructables.com/files/deriv/FM6/4ZYY/FHJMR7JC/FM64ZYYFHJMR7JC.SMALL.jpg EIMTVL3FHQPF4GV mikeasaurus 9 months ago I was on vacation in Disneyland, I was on the adult side drinking peach daiquiris and chatting with Goofy about how Disney should have cage matches when he recommends that I ride Space Mountain. Now I usually don't get upset, but I had already been on Space Mountain about 4 times alread...
By: mikeasaurus

Continue Reading »]]> technology Sun, 22 Jun 2008 15:11:52 PDT http://www.instructables.com/id/Individuality-Bot/
Individuality Bot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FV4/9GD2/FHH3366U/FV49GD2FHH3366U.SQUARE2.jpg http://img.instructables.com/files/deriv/FV4/9GD2/FHH3366U/FV49GD2FHH3366U.SQUARE.jpg http://img.instructables.com/files/deriv/FV4/9GD2/FHH3366U/FV49GD2FHH3366U.SMALL.jpg ERUJJX2FH7AUNSV artqny You can make this robot as functional as you want and as creative and interesting as you want. The main idea here is that this robot represents who you are as an individual. I'll tell you what I did to make my robot to get you started, and you are encouraged to deviate from my design to incorporate ...
By: artqny

Continue Reading »]]> technology Tue, 17 Jun 2008 18:11:23 PDT http://www.instructables.com/id/Instructables-Robot-Paper-Model/
Instructables Robot -- Paper Model - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1W/OA1O/FHEZC7X0/F1WOA1OFHEZC7X0.SQUARE2.jpg http://img.instructables.com/files/deriv/F1W/OA1O/FHEZC7X0/F1WOA1OFHEZC7X0.SQUARE.jpg http://img.instructables.com/files/deriv/F1W/OA1O/FHEZC7X0/F1WOA1OFHEZC7X0.SMALL.jpg E8NKUOIFHAVXTSC =SMART= This is an instructable showing you how you can make your very own Instructables Robot modeli used photoshop elements to create the net for the model and to colour it and add details, overall this took me about a day to design but it will only take you about 5-10 minutes to make I hope you enjoy it...
By: =SMART=

Continue Reading »]]> technology Fri, 13 Jun 2008 15:22:36 PDT http://www.instructables.com/id/Building-Small-Robots-Making-One-Cubic-Inch-Micro/
Building Small Robots: Making One Cubic Inch Micro-Sumo Robots and Smaller - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F37/1KLL/FHDTJ3HD/F371KLLFHDTJ3HD.SQUARE2.jpg http://img.instructables.com/files/deriv/F37/1KLL/FHDTJ3HD/F371KLLFHDTJ3HD.SQUARE.jpg http://img.instructables.com/files/deriv/F37/1KLL/FHDTJ3HD/F371KLLFHDTJ3HD.SMALL.jpg EARVAY6FHDTJ3HF mikey77 Here are some details on building tiny robots and circuits. This instructable will also cover some basic tips and techniques that are useful in building robots of any size.For me, one of the great challenges in electronics is to see just how small a robot I can make. The beautiful thing about electr...
By: mikey77

Continue Reading »]]> technology Thu, 12 Jun 2008 18:40:52 PDT http://www.instructables.com/id/A-Practical-Robot/
A Practical Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FR1/ANF4/FGHLJ47J/FR1ANF4FGHLJ47J.SQUARE2.jpg http://img.instructables.com/files/deriv/FR1/ANF4/FGHLJ47J/FR1ANF4FGHLJ47J.SQUARE.jpg http://img.instructables.com/files/deriv/FR1/ANF4/FGHLJ47J/FR1ANF4FGHLJ47J.SMALL.jpg E6S8EROFFX340G0 Al1970 I call it a practical robot for a number of reasons. It can be make using every day tools that most people who do work around the house would have. By using many surplus items the cost is kept down. The robot's arm can lift over a 2 lb. object from the floor to 3 ft. 4 in. in the air, so the arm can...
By: Al1970

Continue Reading »]]> technology Thu, 29 May 2008 16:02:43 PDT http://www.instructables.com/id/Egglift-an-egg-cooker/
Egglift: an automatic LEGO egg cooker - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRZ/IO8V/FGUYVSCR/FRZIO8VFGUYVSCR.SQUARE2.jpg http://img.instructables.com/files/deriv/FRZ/IO8V/FGUYVSCR/FRZIO8VFGUYVSCR.SQUARE.jpg http://img.instructables.com/files/deriv/FRZ/IO8V/FGUYVSCR/FRZIO8VFGUYVSCR.SMALL.jpg EHE4FNOFGUYVSBR chrismake LEGOs are really great to build all kinds of robots. I'd like to introduce you the Egglift. The Egglift is an appliance to cook boiled eggs made out of LEGO bricks, powered and controlled with LEGO Mindstorms. Acknowledgment: The original Egglift idea is from famous French inventor Rolan...
By: chrismake

Continue Reading »]]> technology Fri, 30 May 2008 14:25:29 PDT http://www.instructables.com/id/Flower-Whirligig-Robogigithingy/
Flower Whirligig Robogigithingy - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2U/NV7R/FFRD43E4/F2UNV7RFFRD43E4.SQUARE2.jpg http://img.instructables.com/files/deriv/F2U/NV7R/FFRD43E4/F2UNV7RFFRD43E4.SQUARE.jpg http://img.instructables.com/files/deriv/F2U/NV7R/FFRD43E4/F2UNV7RFFRD43E4.SMALL.jpg ESMJLNRFFRD44EK caitlinsdad Now here's a flower ornament with a robot theme or a robot with a flower theme. (Judges pull out rulebook to look at fine print again...) Whirligigs are mechanical contraptions that are powered by the wind to create some kind of fanciful movement and adds a touch of fanciness to your garden or yard...
By: caitlinsdad

Continue Reading »]]> technology Mon, 5 May 2008 20:45:47 PDT http://www.instructables.com/id/Micro-RC-Car-Teardown/
Micro RC Car Teardown - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEB/IDBS/F3KLQ0LU/FEBIDBSF3KLQ0LU.SQUARE2.jpg http://img.instructables.com/files/deriv/FEB/IDBS/F3KLQ0LU/FEBIDBSF3KLQ0LU.SQUARE.jpg http://img.instructables.com/files/deriv/FEB/IDBS/F3KLQ0LU/FEBIDBSF3KLQ0LU.SMALL.jpg ELIRWPQF3KLQ0MC westfw This is sort of an "example" instructable for the Dr Destruct-O Teardowns group; something I did a few years ago. I don't know if this particular car is still available, but...This is one of those mini remote controller cars that was all over, selling for $10 or less. It wasn't so great as a car;...
By: westfw

Continue Reading »]]> technology Sun, 1 Jul 2007 01:22:00 PDT http://www.instructables.com/id/A-Servo-based-4-legged-Walker/
A Servo-based 4-legged Walker - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZH/11HN/TN2EUGCWSDR/FZH11HNTN2EUGCWSDR.SQUARE2.jpg http://img.instructables.com/files/deriv/FZH/11HN/TN2EUGCWSDR/FZH11HNTN2EUGCWSDR.SQUARE.jpg http://img.instructables.com/files/deriv/FZH/11HN/TN2EUGCWSDR/FZH11HNTN2EUGCWSDR.SMALL.jpg EYLB2BCA9BEUGCWIZL The Real Elliot Build your own (needlessly tech) servomotor-driven 4-leg walker robot!First, a warning: This bot is basically a microcontroller-brain version of the classic BEAM 4-legged walker. The BEAM 4-legger may be easier for you to make if you aren't already set up for microcontroller programming and just wa...
By: The Real Elliot

Continue Reading »]]> technology Tue, 14 Nov 2006 01:47:02 PST http://www.instructables.com/id/Worlds-Cheapest-I2C-I-Squared-C-Adapter/
World's Cheapest I2C (I-Squared-C) Adapter - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQW/9ISB/FFAOSLTV/FQW9ISBFFAOSLTV.SQUARE2.jpg http://img.instructables.com/files/deriv/FQW/9ISB/FFAOSLTV/FQW9ISBFFAOSLTV.SQUARE.jpg http://img.instructables.com/files/deriv/FQW/9ISB/FFAOSLTV/FQW9ISBFFAOSLTV.SMALL.jpg EEOEMS1FFAOSKD3 pburgess Make a sensor interface for your computer for under a buck!Update 6/9/08: After exploring several avenues I've concluded there is no practical manner of implementing this technique in Microsoft Windows. This is not petty OS bashing, I've really busted a nut trying! Sorry! Windows users needing I2C c...
By: pburgess

Continue Reading »]]> technology Wed, 23 Apr 2008 02:08:05 PDT http://www.instructables.com/id/How-to-build-your-own-Jet-Engine/
How to build your own Jet Engine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FTX/3N7K/GOHEP27WUOZ/FTX3N7KGOHEP27WUOZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FTX/3N7K/GOHEP27WUOZ/FTX3N7KGOHEP27WUOZ.SQUARE.jpg http://img.instructables.com/files/deriv/FTX/3N7K/GOHEP27WUOZ/FTX3N7KGOHEP27WUOZ.SMALL.jpg EEA99AAUR3EP28744T russwmoore You don't have to be Jay Leno to own a jet powered motorcycle, and we will show you how to make your own jet enigne right here to power your wacky vehicles. This is an ongoing project, and plenty of additional info will be available on our website soon. See the full build at http://www.badbros.netT...
By: russwmoore

Continue Reading »]]> technology Mon, 17 Apr 2006 16:27:06 PDT http://www.instructables.com/id/Evil-Robot-of-Doom/ http://img.instructables.com/files/deriv/FTQ/WTWB/FCEIJ0AG/FTQWTWBFCEIJ0AG.SQUARE2.jpg http://img.instructables.com/files/deriv/FTQ/WTWB/FCEIJ0AG/FTQWTWBFCEIJ0AG.SQUARE.jpg http://img.instructables.com/files/deriv/FTQ/WTWB/FCEIJ0AG/FTQWTWBFCEIJ0AG.SMALL.jpg E2MFN6TFCEIJ099 Charles IV I made this thing today using parts from 2 hard drives, a old Sony CD player, an RC car, sim cards, a lighter and a pinewood derby car. It is equipped with motors to make it move, a flamethrower and a light-up face with LED. I can get the flame from the flamethrower much bigger but my lighter was ru...
By: Charles IV

Continue Reading »]]> technology Sun, 10 Feb 2008 19:04:44 PST http://www.instructables.com/id/Robohoodie-Instructables-Robot-Hoodie/
Robohoodie Instructables Robot Hoodie - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FC2/14OV/FEQHFL8S/FC214OVFEQHFL8S.SQUARE2.jpg http://img.instructables.com/files/deriv/FC2/14OV/FEQHFL8S/FC214OVFEQHFL8S.SQUARE.jpg http://img.instructables.com/files/deriv/FC2/14OV/FEQHFL8S/FC214OVFEQHFL8S.SMALL.jpg ECDM4YFFEQHFLAH caitlinsdad So, what is the latest in hacked T-shirt haute couture? An Instructables Robot Hoodie of course... Straight from the fashion runways of I-don't-know-where is this versatile and unique pret-a-porter garment. A late entry into the contest but I had this material lying around for a future Instructab...
By: caitlinsdad

Continue Reading »]]> technology Thu, 10 Apr 2008 10:27:52 PDT http://www.instructables.com/id/How-to-make-huge-posters./
How to make huge posters. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEQ/BHHD/FEL1NO4L/FEQBHHDFEL1NO4L.SQUARE2.jpg http://img.instructables.com/files/deriv/FEQ/BHHD/FEL1NO4L/FEQBHHDFEL1NO4L.SQUARE.jpg http://img.instructables.com/files/deriv/FEQ/BHHD/FEL1NO4L/FEQBHHDFEL1NO4L.SMALL.jpg EOPKQWZFEL1NNWE GorillazMiko Featured, front page on 4/06/08! :-) This Instructables shows you how to make huge posters, with just an image in JPEG format, a computer, printer, and tape. Let's get to work! I hope you like my Instructable, don't forget to rate, or comment! Items. TapeScissors (optional)ComputerHandshttp...
By: GorillazMiko

Continue Reading »]]> technology Sun, 6 Apr 2008 14:53:50 PDT http://www.instructables.com/id/Instructables-Robot-Cartoons/ http://img.instructables.com/files/deriv/F1L/LOS4/FDI91JA5/F1LLOS4FDI91JA5.SQUARE2.jpg http://img.instructables.com/files/deriv/F1L/LOS4/FDI91JA5/F1LLOS4FDI91JA5.SQUARE.jpg http://img.instructables.com/files/deriv/F1L/LOS4/FDI91JA5/F1LLOS4FDI91JA5.SMALL.jpg EWYLLT0FEL1NJDX caitlinsdad There are a million stories in this big Instructables community. These are a few that deserve to be told. Inspired by the offbeat works of Gary Larson and his Far Side (c) cartoons, I encourage you to figure out what makes these people unique. Be warned, lurking in the forum is addictive. Join the f...
By: caitlinsdad

Continue Reading »]]> technology Sat, 5 Apr 2008 20:55:25 PDT http://www.instructables.com/id/The-becoming-of-a-bonded-hand/
The becoming of a bonded hand - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL1/04PE/FEHJYCMX/FL104PEFEHJYCMX.SQUARE2.jpg http://img.instructables.com/files/deriv/FL1/04PE/FEHJYCMX/FL104PEFEHJYCMX.SQUARE.jpg http://img.instructables.com/files/deriv/FL1/04PE/FEHJYCMX/FL104PEFEHJYCMX.SMALL.jpg E59EMZMFEHJYCNI nejo0017 Not quick, but dirty! Here you get a step by step intro, how to weld a static-robot-extremity and how to plan a simple stand from solid wood. Enjoy and remake it if you like. Planning the construction a) Strain your brain and think about the part you want to shape:- Think about the time you want...
By: nejo0017

Continue Reading »]]> technology Mon, 31 Mar 2008 17:30:41 PDT http://www.instructables.com/id/Instructables-Robot-Paper-LED-Flashlight/
Instructables Robot Paper LED Flashlight - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8V/W44X/FEAQ3Y0L/F8VW44XFEAQ3Y0L.SQUARE2.jpg http://img.instructables.com/files/deriv/F8V/W44X/FEAQ3Y0L/F8VW44XFEAQ3Y0L.SQUARE.jpg http://img.instructables.com/files/deriv/F8V/W44X/FEAQ3Y0L/F8VW44XFEAQ3Y0L.SMALL.jpg E8ZSZUFFDWI2KRV marc92 This is my entry into the Instructables Pocket-Sized Contest.Darkness is everywhere and often you find yourself stuck in a black abyss without a source of light. Fear no more, as now there is a tiny LED flashlight that fits into any pocket and weighs no more than a pencil, all while sporting a pict...
By: marc92

Continue Reading »]]> technology Thu, 27 Mar 2008 17:44:16 PDT http://www.instructables.com/id/How-To-Enter-Instructables-and-RoboGames-Robot-Con/
How To Enter Instructables and RoboGames Robot Contest - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F25/PFXJ/FE6F1DH9/F25PFXJFE6F1DH9.SQUARE2.jpg http://img.instructables.com/files/deriv/F25/PFXJ/FE6F1DH9/F25PFXJFE6F1DH9.SQUARE.jpg http://img.instructables.com/files/deriv/F25/PFXJ/FE6F1DH9/F25PFXJFE6F1DH9.SMALL.gif EG2G5NUFE6F1DCN Contest Robot Robots are never going to take over the world if we don't get off the couch and make them ourselves! That's why we've teamed up with the folks at RoboGames to bring you the Robot Contest! Want to win a trip to RoboGames 2009? Tell us how you made your robot.Good robot design is highly detailed, so ...
By: Contest Robot

Continue Reading »]]> technology Tue, 15 Apr 2008 15:52:12 PDT http://www.instructables.com/id/How-to-Make-an-Instructables-T-Shirt/
How to Make an Instructables T-Shirt - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F52/WIWK/FE38J2GT/F52WIWKFE38J2GT.SQUARE2.jpg http://img.instructables.com/files/deriv/F52/WIWK/FE38J2GT/F52WIWKFE38J2GT.SQUARE.jpg http://img.instructables.com/files/deriv/F52/WIWK/FE38J2GT/F52WIWKFE38J2GT.SMALL.jpg EIEUIF4FE38J2FE joejoerowley Hi,In this instructable I am going to show you How to Make an Instructables T-Shirt. This is a quick and fairly cheap way to make an instructables t-shirt if you did not win one a contest or if you have not bought one from the Instructables Store. Materials/ Tools MaterialsWhite Cotton T-Shirt- I...
By: joejoerowley

Continue Reading »]]> technology Sat, 22 Mar 2008 16:09:00 PDT http://www.instructables.com/id/Bobblebot-Robot/
Bobblebot Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FID/CNYX/FDSE94YR/FIDCNYXFDSE94YR.SQUARE2.jpg http://img.instructables.com/files/deriv/FID/CNYX/FDSE94YR/FIDCNYXFDSE94YR.SQUARE.jpg http://img.instructables.com/files/deriv/FID/CNYX/FDSE94YR/FIDCNYXFDSE94YR.SMALL.jpg EAUMPSFFDSE954O caitlinsdad Is that a robot in your pocket or are you just glad to see me?Since the extinction of the the pocket protector, what else could replace the ubiquitous uber-geek pocket accessory but a Bobblebot pocket Robot? People can spot it a mile away and know to either holster their K'nex weapons or say "Hai, ...
By: caitlinsdad

Continue Reading »]]> technology Sat, 15 Mar 2008 08:23:29 PDT http://www.instructables.com/id/How-to-build-your-first-robot/
How to build your first Robot ($ 85) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJ2/FVLU/FDO29C6M/FJ2FVLUFDO29C6M.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ2/FVLU/FDO29C6M/FJ2FVLUFDO29C6M.SQUARE.jpg http://img.instructables.com/files/deriv/FJ2/FVLU/FDO29C6M/FJ2FVLUFDO29C6M.SMALL.jpg E0FCN34FDO29C86 fritsl I HAVE MADE A NEW AND UPDATED VERSION OF THIS. PLEASE FIND IT HERE http://www.instructables.com/id/How-to-make-your-first-robot-an-actual-programma/ ******************************************************************************** Update: To some 10.000 people who already read this post, I would lik...
By: fritsl

Continue Reading »]]> technology Wed, 12 Mar 2008 17:11:12 PDT http://www.instructables.com/id/Vibrobot-Paintings/
Vibrobot Paintings - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYV/QM59/FDLVOWOB/FYVQM59FDLVOWOB.SQUARE2.jpg http://img.instructables.com/files/deriv/FYV/QM59/FDLVOWOB/FYVQM59FDLVOWOB.SQUARE.jpg http://img.instructables.com/files/deriv/FYV/QM59/FDLVOWOB/FYVQM59FDLVOWOB.SMALL.jpg EJFYJG7FDLVOWLJ hay_jumper Yet another chapter in the "Let A Sculptor Make Drawings And Paintings Chronicles" Now with video! Build a Vibrobot You've seen them all before: Vibrobots. Neat little toys using a pager motor, a toothbrush head, and a battery. Cute, aren't they? My not-so-cute Vibrobot I only had AA batteries...
By: hay_jumper

Continue Reading »]]> technology Sun, 9 Mar 2008 15:46:33 PDT http://www.instructables.com/id/Build-a-Magical-Humping-Machine/
Large Dancing Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQN/N2MA/FBVHE1JP/FQNN2MAFBVHE1JP.SQUARE2.jpg http://img.instructables.com/files/deriv/FQN/N2MA/FBVHE1JP/FQNN2MAFBVHE1JP.SQUARE.jpg http://img.instructables.com/files/deriv/FQN/N2MA/FBVHE1JP/FQNN2MAFBVHE1JP.SMALL.jpg EQ6A325FBVHDZLK leevonk Build a large dancing robot. This was supposed to be a walking robot, but it more kinda beebopped around. video on last step. Build a Prototype First, The _Prototype_:Before you make a large, high power robot, it's good to make a smaller scale prototype. I made a simple walking robot using= ...
By: leevonk

Continue Reading »]]> technology Sun, 27 Jan 2008 16:00:29 PST http://www.instructables.com/id/Prepare-some-surplus-PIR-sensors-for-robotics/
Prepare some surplus PIR sensors for robotics - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FA2/HP9Q/FBQ33TLG/FA2HP9QFBQ33TLG.SQUARE2.jpg http://img.instructables.com/files/deriv/FA2/HP9Q/FBQ33TLG/FA2HP9QFBQ33TLG.SQUARE.jpg http://img.instructables.com/files/deriv/FA2/HP9Q/FBQ33TLG/FA2HP9QFBQ33TLG.SMALL.jpg EYE0C6MFBPF3KW9 frickelkram I found a bunch of PIR sensors on eBay. They are mounted on a pcb that was produced for a hands free set for mobile phones. I like to describe here how to prepare the sensor for the usage in robotics projects.If you don't know what a PIR sensor is, just have a look at Wikipedia http://en.wikipedia.o...
By: frickelkram

Continue Reading »]]> technology Fri, 25 Jan 2008 07:14:33 PST http://www.instructables.com/id/Funky-Fleecy-Robot-Scarf/
Funky Fleecy Robot Scarf - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQM/YWGT/FB10TOIB/FQMYWGTFB10TOIB.SQUARE2.jpg http://img.instructables.com/files/deriv/FQM/YWGT/FB10TOIB/FQMYWGTFB10TOIB.SQUARE.jpg http://img.instructables.com/files/deriv/FQM/YWGT/FB10TOIB/FQMYWGTFB10TOIB.SMALL.jpg E9PXX3SFB10TOI7 DotatDabbled When the weather turned cold after christmas, my 2 year old saw my scarf and wanted a scarf of his own. The boy loves robots (who doesn't!) and I had a vision of a cute little robot decorating his new scarf. I had some leftover brown fleece and a piece of white fleece felt, and some embroidery thr...
By: DotatDabbled

Continue Reading »]]> technology Tue, 8 Jan 2008 18:34:00 PST http://www.instructables.com/id/Mr.-Instructables-Head-R/
Mr. Instructables Head (R) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1O/9KOJ/FB11TXOF/F1O9KOJFB11TXOF.SQUARE2.jpg http://img.instructables.com/files/deriv/F1O/9KOJ/FB11TXOF/F1O9KOJFB11TXOF.SQUARE.jpg http://img.instructables.com/files/deriv/F1O/9KOJ/FB11TXOF/F1O9KOJFB11TXOF.SMALL.jpg EE33H74FB11TXTU caitlinsdad OK, so Santa forgot to give you all this classic retro stocking stuffer so I am going to show you how to make one... I was inspired by the Instructables Robot Cake (sorry, third day on the job, haven't figured out how to link - doesn't work for me) for its modular design and best use of the robot a...
By: caitlinsdad

Continue Reading »]]> technology Fri, 4 Jan 2008 22:53:25 PST http://www.instructables.com/id/Automatic-Tubular-Bells/
Automatic Tubular Bells - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKP/J2ZQ/FAQDX55P/FKPJ2ZQFAQDX55P.SQUARE2.jpg http://img.instructables.com/files/deriv/FKP/J2ZQ/FAQDX55P/FKPJ2ZQFAQDX55P.SQUARE.jpg http://img.instructables.com/files/deriv/FKP/J2ZQ/FAQDX55P/FKPJ2ZQFAQDX55P.SMALL.jpg E7V5VRLFAQEDDSM Tolaemon This instrucuable explains the main steps I followed, to build the first prototype of a set of Automatic Tubular Bells I built in 2006. The automatic musical instrument features are: - 12 chimes ( 12 tubular bells ) - Each chime plays one note, so it can play a full octave ( from C to B, inc...
By: Tolaemon

Continue Reading »]]> technology Mon, 31 Dec 2007 09:36:50 PST http://www.instructables.com/id/Autonomous-Foosball-Table/
Autonomous Foosball Table - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F78/IA0H/FABDYW6T/F78IA0HFABDYW6T.SQUARE2.jpg http://img.instructables.com/files/deriv/F78/IA0H/FABDYW6T/F78IA0HFABDYW6T.SQUARE.jpg http://img.instructables.com/files/deriv/F78/IA0H/FABDYW6T/F78IA0HFABDYW6T.SMALL.jpg EKE9WT3FAKWPCVD eski The main project goal was to complete a working prototype for an Autonomous Foosball Table (AFT), where a human player faces a robotic opponent. From the human perspective of the game, the foosball table is very similar to a regular table. The player(s) on the human side are controlled via a series ...
By: eski

Continue Reading »]]> technology Mon, 24 Dec 2007 22:18:28 PST http://www.instructables.com/id/The-PrintBot/
The PrintBot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKF/LLC1/FA190W2T/FKFLLC1FA190W2T.SQUARE2.jpg http://img.instructables.com/files/deriv/FKF/LLC1/FA190W2T/FKFLLC1FA190W2T.SQUARE.jpg http://img.instructables.com/files/deriv/FKF/LLC1/FA190W2T/FKFLLC1FA190W2T.SMALL.jpg ETIS0WNFA190W3G TeamEasyEnough The PrintBot is a iRobot Create-mounted dot-matrix printer. The PrintBot prints using Talcum powder on any ground surface. Using the robot for the base allows the robot to print a virtually unlimited size. Think football feilds or basketball courts. Maybe the rivals should be on the lookout for a sw...
By: TeamEasyEnough

Continue Reading »]]> technology Fri, 21 Dec 2007 19:55:48 PST http://www.instructables.com/id/Give-the-gift-of-Robot-Invasion/
Give the gift of Robot Invasion - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FX9/QBZ2/4YJEVYDZY5R/FX9QBZ24YJEVYDZY5R.SQUARE2.jpg http://img.instructables.com/files/deriv/FX9/QBZ2/4YJEVYDZY5R/FX9QBZ24YJEVYDZY5R.SQUARE.jpg http://img.instructables.com/files/deriv/FX9/QBZ2/4YJEVYDZY5R/FX9QBZ24YJEVYDZY5R.SMALL.jpg EOEM3MOZFEEVYE004P MrMunki Solar powered robot ornament wishes you holiday greetings during the day but when the lights go out radios home for reinforcement. Parts: Electronics: 2N3904 Transistor Rectifier Diode 1M resistor Blinking LED 2 Rechargeable 1.5v batteries Solar panel Misc. Parts: Copper plumbing parts Gromme...
By: MrMunki

Continue Reading »]]> technology Sun, 31 Dec 2006 21:21:09 PST http://www.instructables.com/id/Itty-Bitty-Vibrobot/
Itty Bitty Vibrobot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCM/MD9Z/F9T3NGVY/FCMMD9ZF9T3NGVY.SQUARE2.jpg http://img.instructables.com/files/deriv/FCM/MD9Z/F9T3NGVY/FCMMD9ZF9T3NGVY.SQUARE.jpg http://img.instructables.com/files/deriv/FCM/MD9Z/F9T3NGVY/FCMMD9ZF9T3NGVY.SMALL.jpg EUAKQJFF9T3NIFB pepik This is a quick, easy project to build a tiny vibrating robot, a vibrobot. Vibrobots dance around typically by having an off-balance motor make them jiggle.This one uses a vibrating motor from an old cell phone, a 3V watch battery, and a paper clip. A little soldering, some hot glue, and you've got ...
By: pepik

Continue Reading »]]> technology Fri, 7 Dec 2007 13:29:22 PST http://www.instructables.com/id/Obstacle-Avoiding-Robot-with-a-Personality!/
Obstacle-Avoiding Robot with a Personality! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FG0/AZ8M/F9T3ZZCJ/FG0AZ8MF9T3ZZCJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FG0/AZ8M/F9T3ZZCJ/FG0AZ8MF9T3ZZCJ.SQUARE.jpg http://img.instructables.com/files/deriv/FG0/AZ8M/F9T3ZZCJ/FG0AZ8MF9T3ZZCJ.SMALL.jpg EQJLZ35F9T3ZZCL mortaldoom780 Unlike most roaming 'bots, this one actually roams in such a way that it actually seems to be 'thinking'! With a BASIC Stamp microcontroller (Basic Atom, Parallax Basic Stamps, Coridium Stamp, etc.), a chassis of some kind, a few sensors, and some sophisticated code from this instructable, you can c...
By: mortaldoom780

Continue Reading »]]> technology Tue, 4 Dec 2007 19:48:45 PST http://www.instructables.com/id/How-to-Build-a-Robot---The-BeetleBot/
How to Build a Robot - The BeetleBot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0O/KEZY/F2L4FTHN/F0OKEZYF2L4FTHN.SQUARE2.jpg http://img.instructables.com/files/deriv/F0O/KEZY/F2L4FTHN/F0OKEZYF2L4FTHN.SQUARE.jpg http://img.instructables.com/files/deriv/F0O/KEZY/F2L4FTHN/F0OKEZYF2L4FTHN.SMALL.jpg EMXHDSPF2L4FTB0 robomaniac Welcome!I have been in robotics since I was a kid and I am very passionate by robotics. I learn BEAM robotics around 1997-98 and started building robots for a science faire project call "Insectroides" in 2001. http://robomaniac.solarbotics.net ( they change server and the website links does not wor...
By: robomaniac

Continue Reading »]]> technology Fri, 29 Jun 2007 20:19:20 PDT http://www.instructables.com/id/Beware-of-the-horrible-pumpkin-bots-..../
Beware of the horrible pumpkin bots .... - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOL/N8T9/F82EZJSP/FOLN8T9F82EZJSP.SQUARE2.jpg http://img.instructables.com/files/deriv/FOL/N8T9/F82EZJSP/FOLN8T9F82EZJSP.SQUARE.jpg http://img.instructables.com/files/deriv/FOL/N8T9/F82EZJSP/FOLN8T9F82EZJSP.SMALL.jpg EP72TLYF82EU63F frickelkram These bots are all dangerous!They came over me with full force. I did not expect them to be this powerful. Hopefully they all lose their energy very soon ... ;-) What you need It helps a lot if you own many many things that you got out of old electronic devices. I used motors from old XBOX gamep...
By: frickelkram

Continue Reading »]]> technology Mon, 29 Oct 2007 12:11:29 PDT http://www.instructables.com/id/Giant-Squid-kinetic-sculpture-from-found-materials/
Giant Squid kinetic sculpture from found materials - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYS/W5J0/F35J1OEA/FYSW5J0F35J1OEA.SQUARE2.jpg http://img.instructables.com/files/deriv/FYS/W5J0/F35J1OEA/FYSW5J0F35J1OEA.SQUARE.jpg http://img.instructables.com/files/deriv/FYS/W5J0/F35J1OEA/FYSW5J0F35J1OEA.SMALL.jpg EXIHDZDF3B4B1LI nemomatic This sculpture grew out of a long time fascination with the Giant Squid. My name being Nemo has meant a lifetime of "Captain Nemo" references, thus making me aware of these monsters since an early age. I am a sculptor who works almost exclusively with found materials, though typically I like to buil...
By: nemomatic

Continue Reading »]]> technology Sun, 24 Jun 2007 23:10:25 PDT http://www.instructables.com/id/iRobot-Create-Personal-Home-Robot/
iRobot Create Personal Home Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FX8/TT5A/F6B7Q1B3/FX8TT5AF6B7Q1B3.SQUARE2.jpg http://img.instructables.com/files/deriv/FX8/TT5A/F6B7Q1B3/FX8TT5AF6B7Q1B3.SQUARE.jpg http://img.instructables.com/files/deriv/FX8/TT5A/F6B7Q1B3/FX8TT5AF6B7Q1B3.SMALL.jpg EJQOKWXF6B7Q1AZ dttworld Introducing a personal home robot built around the iRobot Create platform and a mini-itx computer system. It has never been easier and more affordable to design and build robots by leveraging the economies of scale from the software, PC, toy and other high volume consumer industries. This robot ...
By: dttworld

Continue Reading »]]> technology Sun, 9 Sep 2007 23:49:08 PDT http://www.instructables.com/id/Furby-Hijack/
Furby Hijack - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F50/U5Y1/J5HET2JYK7H/F50U5Y1J5HET2JYK7H.SQUARE2.jpg http://img.instructables.com/files/deriv/F50/U5Y1/J5HET2JYK7H/F50U5Y1J5HET2JYK7H.SQUARE.jpg http://img.instructables.com/files/deriv/F50/U5Y1/J5HET2JYK7H/F50U5Y1J5HET2JYK7H.SMALL.jpg EDZ6HPOMV5ET9K6IL7 leevonk I took control of a furby's body using a PIC16F877 microcomputer. Videos on last step. The furby's in-built sensors and actuators: light sensor, IR sensor, IR transmitter, tongue touch sensor, belly touch sensor, microphone, speaker. The furby's main (and only) motor was dead, so I added ot...
By: leevonk

Continue Reading »]]> technology Wed, 1 Nov 2006 16:31:29 PST http://www.instructables.com/id/How-to-make-an-autonomous-basketball-playing-robot/
How to make an autonomous basketball playing robot using an iRobot Create as a base - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8L/MEUL/F5Y3TND3/F8LMEULF5Y3TND3.SQUARE2.jpg http://img.instructables.com/files/deriv/F8L/MEUL/F5Y3TND3/F8LMEULF5Y3TND3.SQUARE.jpg http://img.instructables.com/files/deriv/F8L/MEUL/F5Y3TND3/F8LMEULF5Y3TND3.SMALL.jpg ER7EGBCF5UNYDIL Matthew Oelke This is my entry for the iRobot Create challenge. The hardest part of this whole process for me was deciding what the robot was going to do. I wanted to demonstrate the cool features of the Create, while also adding in some robo flair. All of my ideas seemed to either fall in the category of bori...
By: Matthew Oelke

Continue Reading »]]> technology Fri, 31 Aug 2007 19:08:11 PDT http://www.instructables.com/id/The-SOMA-Project/
The SOMA Project - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYH/UXB3/F6B7W5GM/FYHUXB3F6B7W5GM.SQUARE2.jpg http://img.instructables.com/files/deriv/FYH/UXB3/F6B7W5GM/FYHUXB3F6B7W5GM.SQUARE.jpg http://img.instructables.com/files/deriv/FYH/UXB3/F6B7W5GM/FYHUXB3F6B7W5GM.SMALL.jpg EX4534CF5LDFOI9 thesomaproject The SOMA Project was a senior design project created by six university students who love spending all night in lab building robots. A fully-autonomous swarm was designed and built to be used as a platform for future swarm applications. Four fully autonomous robots were constructed, each capable of...
By: thesomaproject

Continue Reading »]]> technology Sun, 9 Sep 2007 21:29:38 PDT http://www.instructables.com/id/ServerBot---for-serving-food-and-drinks/
ServerBot - for serving food and drinks - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8C/L1J1/F5Y3YPUH/F8CL1J1F5Y3YPUH.SQUARE2.jpg http://img.instructables.com/files/deriv/F8C/L1J1/F5Y3YPUH/F8CL1J1F5Y3YPUH.SQUARE.jpg http://img.instructables.com/files/deriv/F8C/L1J1/F5Y3YPUH/F8CL1J1F5Y3YPUH.SMALL.jpg EE5KHWJF5Y3YPUG JoeCreate I believe I have created a robot that's functional, helpful, entertaining, whimsical AND simply amazing.The ServerBot. Built upon an iRobot Create.A robot with the ability to move reliably between any room in the house while carrying a payload, in our case, a serving tray on top. The ServerBot has...
By: JoeCreate

Continue Reading »]]> technology Fri, 31 Aug 2007 10:27:45 PDT http://www.instructables.com/id/eyeRobot---The-Robotic-White-Cane/
eyeRobot - The Robotic White Cane - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFK/QINP/F5R8QRBI/FFKQINPF5R8QRBI.SQUARE2.jpg http://img.instructables.com/files/deriv/FFK/QINP/F5R8QRBI/FFKQINPF5R8QRBI.SQUARE.jpg http://img.instructables.com/files/deriv/FFK/QINP/F5R8QRBI/FFKQINPF5R8QRBI.SMALL.jpg E9E5IHKF5R8QQHG shrimpy Abstract:Using the iRobot Roomba Create, I have prototyped a device called eyeRobot. It will guide blind and visually impaired users through cluttered and populated environments by using the Roomba as a base to marry the simplicity of the traditional white cane with the instincts of a seeing-eye dog...
By: shrimpy

Continue Reading »]]> technology Sat, 8 Sep 2007 09:22:04 PDT http://www.instructables.com/id/PosterBot%3a-Make-a-Marker-Writing-Robot-out-of-an-O/
PosterBot: Make a Marker-Writing Robot out of an Old Inket printer and an iRobot Create - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOW/FMD7/F5Y3YTPN/FOWFMD7F5Y3YTPN.SQUARE2.jpg http://img.instructables.com/files/deriv/FOW/FMD7/F5Y3YTPN/FOWFMD7F5Y3YTPN.SQUARE.jpg http://img.instructables.com/files/deriv/FOW/FMD7/F5Y3YTPN/FOWFMD7F5Y3YTPN.SMALL.jpg EM9RWKMF5Y3YTS2 W_world I decided to make this robot because I've never had very neat handwriting, so making large letters has always been difficult. When I was on Student Council in high school, I always got marked down for posters that weren't "neat" enough. Like any nerd, I figured "If I can't do it, I'll make a robot t...
By: W_world

Continue Reading »]]> technology Tue, 4 Sep 2007 17:08:10 PDT http://www.instructables.com/id/Giant-Kinetic-Robot-sculpture-from-recycled-and-fo/
Giant Kinetic Robot sculpture from recycled and found materials - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FD0/1L00/F35J1OFF/FD01L00F35J1OFF.SQUARE2.jpg http://img.instructables.com/files/deriv/FD0/1L00/F35J1OFF/FD01L00F35J1OFF.SQUARE.jpg http://img.instructables.com/files/deriv/FD0/1L00/F35J1OFF/FD01L00F35J1OFF.SMALL.jpg EQUM756F35J1OHP nemomatic This Instructable will take you through some of the steps involved in building the Robot sculpture titled "General Debris". He gets his name from the many salvaged and found objects that he is built from. The General is one of many sculptures that I have made in this fashion over the years. If yo...
By: nemomatic

Continue Reading »]]> technology Sun, 24 Jun 2007 13:24:30 PDT http://www.instructables.com/id/Tamiya-72004-worm-gearbox-speed-sensor/
Tamiya 72004 worm gearbox speed sensor - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGU/L5XF/KRNEQHO9AY4/FGUL5XFKRNEQHO9AY4.SQUARE2.jpg http://img.instructables.com/files/deriv/FGU/L5XF/KRNEQHO9AY4/FGUL5XFKRNEQHO9AY4.SQUARE.jpg http://img.instructables.com/files/deriv/FGU/L5XF/KRNEQHO9AY4/FGUL5XFKRNEQHO9AY4.SMALL.jpg E7Q9FHDWKUEQHO98Z4 ame I wanted to accurately control the speed of the motor in a Tamiya 72004 worm gearbox for a robot I am building. To do this you must have some way to measure the current speed. This project shows the evolution of the speed sensor. As you can see in the picture, the motor drives a worm gear directl...
By: ame

Continue Reading »]]> technology Tue, 8 Aug 2006 19:46:23 PDT http://www.instructables.com/id/The-4am-Glass-Robot/
The 4am Glass Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FIE/58NS/F6S8YYWB/FIE58NSF6S8YYWB.SQUARE2.jpg http://img.instructables.com/files/deriv/FIE/58NS/F6S8YYWB/FIE58NSF6S8YYWB.SQUARE.jpg http://img.instructables.com/files/deriv/FIE/58NS/F6S8YYWB/FIE58NSF6S8YYWB.SMALL.jpg EWOX8W7F6S8YYWG Kiteman Some people have asked me where I get my ideas. I'm not sure, but I know when I get them.I don't know why, but I seem to get many of my ideas at inconvenient times - half way through a lesson, walking home in the dark, or, frequently, I wake up at three or for in the morning and go Wow, that's a go...
By: Kiteman

Continue Reading »]]> technology Tue, 25 Sep 2007 15:19:04 PDT