Where to get MEK? Answered

Hey all,A few years ago I used to see MEK (Methyl Ethyl Keytone) in local hardware stores all the time. Don't know what happened, whether OSHA, or EPA, or some other .gov busybody is responsible, but now it's nowhere to be found... and I've finally run out.Any leads on where I could purchase a jug of it for a good price?P.S. In case anybody is wondering, I have some dried-out liquid electrical tape that uses MEK as the solvent. I am hoping to resurrect it. I suppose I could try acetone, but I'm afraid if it goes wrong it could permanently wreck my mix. :P

Asked by PS118 2 months ago


Sourcing solvents in michigan

Ok, so I'm having some trouble finding solvents in quantities of under 5 gallons (5 is too much, and  for this project 1 gallon is too) that arent acetone, MEK, or xylene (home depot and lowes carry those). Specifically I need Perchloroethylene because thats the solvent that E6000 glue is made with and is the glue I want to thin out. The datasheet indicates that  1,1,1-Trichloroethane, Cyclohexane, Methylene chloride, Chlorothane NU, Chevron solvent 1100, gasoline, Propyl acetate, or Toluene will also dissolve it, but I'd really like to stick with its manufactured solvent.  I presume it would have some sort of pricey hazmat shipping charges or the necessity of some sort of licence and I would rather pick it up, so where (or who) can I order some from in the Detroit area?

Asked by The Ideanator 7 years ago


Chemicals people would want to make?

Basically I want to know what lab chemicals you want to make, if you know how to make any useful chemicals. please post, I am not responsible for and injury's, fatality's, or "bad things" of any sort that come from this thread, all things posted here are to assumed for informational purposes only.

Posted by mr.space 8 years ago


Large Scale Mould Making - the Evolution

I'm so excited, I now have + hours of video to cut and share :)Today we:Finished the split standSet the finished plug in the stand and aligned our waterlineBondo'd stand and plug for a flange lineApplied mold release waxSprayed PVA (Poly Vinyl alcohol)Applied a polyester tooling resin with cabosil (A silica thickener) to serve as the inner mold face (outer shape/surface of final product)Applied 4 layers of chopped fiber with polyester resin (took about an hour and we're still a tad bit high - even with good ventilation)Mind you the resin is catalyzed with MEK-P (Methyl Ethyl Keytone Peroxide -- some call it rocket fuel. It will eat the flesh off the bone and then eat the bone.Why am I so excited? Because we finished today and the catalyzed resin was COOK-ING. "Too hot to touch" is about 180 for the average meat human. It's well above too hot to touch - in fact, the radiant heat is a bit much for most meat peoples. And that's with the prescribed 1% catalyst.More information coming soon :) It's going to take 8 hours to capture all that video :PPhoto: Adding more PVA to the pot in the middle of the second coat.

Posted by trebuchet03 11 years ago