I need suggestions on how to fix an RJ45 socket that will not keep the cable connected?

The little catches that hold the ethernet cable in place have been broken off. I've used duct tape as a temporary solution. Replacing the jack on a 5 year old laptop is too expensive. I'm posting a photo of a broken jack and one that isn't. The one on the left is broken.

Asked by hugmann 8 years ago

hello classmates, i have a wifi router that have rj45 connection port and i want to connect my usb modem.

Hello classmates,  i have a wifi router that have rj45 connection port  and i want to connect my usb modem.,but i dont know the pinout wire connection that joint  to A type usb female to rj45 cable pls help me to this project to solve i need the wire diagram,   thank you

Asked by rj45.usb 5 years ago

USB to Ethernet Adapter Answered

I need to make a USB to Ethernet Adapter, Is it just a pin-to-pin conversion or do I need something else? I know that Ethernet has 8 pins and USB has 4, I just don't know how I would wire those up.?

Asked by Jordo 8 years ago

RJ45 to DB9 Male Pin-outs for Pos Printer

Hi All I have a Point of Sale workstation that doesn't have a serial port. It has com ports that uses RJ45 connectors. The only option is to make a cable that has RJ45 on one end and DB9 Male connector on the other end. I want to know the pin-outs, so that i get it to work.

Asked by LB zim1 2 years ago

Does anyone have the pinout to make a Simple Signaling UPS Cable AP9827- USB to RJ45 for an APC ES 500 UPS?

This is the USB to RJ45 that connects the Battery backup to the computer

Asked by TAAD1 8 years ago

Can a USB wireless adapter be hooked to a router, using a USB to RJ45 ethernet adapter instead of a DSL or cable modem??

My sister lives 5 houses away and we share her internet connection, now I need to hook up my new desktop also, our cousin gave me an US Robotics 5462 wireless router, it works with DSL or cable modems, would like to make it work with my USB wireless adapter using a USB to RJ45 ethernet adapter, will it work?? please any input will be greatly appreciated.

Asked by tavofla 8 years ago

photoresistor + entrance gate(count people)

Hi,i would like to have something like a photoresistor (or photo cell) on entrance gates to count those passing through. i have so many gates,how do i connect so many sensors to one computer? can i recieve such signals from rj45(ethernet) ? regards

Posted by xploit 10 years ago

Make use of iCamera 1000 units?

I have 3 "iCamera 1000" camera units laying around. I do not have the rest of the security system they are designed to function with, but there has to be some way to make use of them and have some fun. I have lots of cat 6 cable and RJ45 connectors to custom make a cable if anyone has the expertise to figure out how to make use of these. Before posting here, I searched and searched here and on Google but only found information regarding the "normal" application of these cameras..... I was hoping for something more outside the box which is why I am here. I included a front/back picture. Thanks for any ideas!!

Posted by PigWhistle 3 years ago

usb over fiber optic cable

My house was once part of a business that was connected to neighboring structures via fiber optics for Internet.  I want to put in a security system with some usb cameras and of course we know what those limits are.  I have successfully made 25' usb/cat5 cables using this site... they work great but I need 50 - 60'.  I was wondering if it was possible to utilize these fiber cables for the data side of the usb and somehow power it by other sources?  I know a little about fiber like putting in connectors and such and I do have 2 transceivers.  I can make rj45/usb connectors for the tranceiver ends but I'm just not sure of the details or even if I'm barking up the right tree.  I'm not sure where the power fits in either. Any of you geniuses know how I could do this? Thanks

Posted by cornflake000 8 years ago

test RJ45Cat5 to USB Female

I'm new to this forum. I need some instructions. I have an RJ45-cat5 male to USB female connector that I bought for 3 bucks. I've tried using it to connect my HP 1050 j410 USB printer to my Linksys WRT54GS (wireless) router so I can have a network printer. (The Desktop is directly wired to the cable modem and the to the router.) It doesn't work, but I don't know if it's the connector itself, or that the printer will not communicate with the router, directly. Is there a way to test the connector with another piece of hardware to determine whether the connector is actually any good? BTW.. I can't determine from HP, whether the 1050 j410 USB printer can become a network printer. Should I just go buy a USB print server for 20 bucks, or whatever? I'm using an Ubuntu 10.04 LTS Desktop with AMD-64 processor. Thanks to you for the best advice. Shobuz99

Posted by shobuz99 6 years ago

Hi3516 Telnet Access Error

First, I apologize for my english. I have a camera module with hi3516 SoC and have to access to hi3516 with telnet. But I couldn't that. If I begin to explain from start. I had an IPC, extracted it and now I have 3 modules (camera module, ir cut module and power/api module). First, I tried access to hi3516 as root. But I couldn't that. Then, I go on another method, telnet. I once cut the network cables of power/api module for some reason. Now I soldered them to each other and connect to internet with a rj45. Powered up camera module with 12V. I open advanced ip scanner(for detect ip address of camera module) and putty when camera module booted up. I typed ip address of camera in host name or ip address box and select telnet in connection type. Then, I clicked open button. A console window came to my screen when putty configration closed and I typed username and password correctly. But I got a warning when I typed right username and password. I can't remember how warning was. I got an error like "Login incorrect" and have to try again totally 3 times for every connection when I type wrong username and password. I followed an article for all of it. Hi3516 has embedded linux os. Article Link: http://www.hkvstar.com/technology-news/china-ip-camera-configuration-firmware.html Any ideas to help me?

Posted by Anıl Enis 10 months ago

Need some help with a parts list for a RGB array.?

Im saving up money to build a wall of 512 RGB LED's from a site called solderlab, and they provide real good documentation, and pics, but im still confused on what I need EXACTLY for the PCB boards. There will be 8 with shift registers, and one for power. I will link pictures to the schematics, renders of the boards. And Ive got some, I think. Also where I can get the custom PCB's made, and or, how much they will be! :D  Heres the Power board:  http://www.solderlab.de/images/led-projects/modular-plasma-wall/Mainboard_PCB.png Render of the Power board:  http://www.solderlab.de/images/led-projects/modular-plasma-wall/Mainbord_Top_1.png One of the 8 Shift register boards: http://www.solderlab.de/images/led-projects/modular-plasma-wall/Segment_PCB.png And lastly, The render of The shift register boards: http://www.solderlab.de/images/led-projects/modular-plasma-wall/595_8x8_Top_1.png And as far as I can tell, I need: 36 RJ45 Jacks 32 Shift register 74HC595's base resistors 10k Conrad Electronics 64 npn-transitors BD139 Conrad Electronics 64 34 pin ribbon cable connector 3- 22p ceramic caps And they say ( but im not sure what or where to get them) Pull-Up / Pull-Down resistors 10k     x5 4 x pin header quarz 16MHz (Im assuming this is just a 16 mhz crystal. And two Electr. Caps 100 µF So what am I missing? and how do I make/get those little wire bridges? Thanks! :D Im excited.

Asked by 'earl 5 years ago

Tracking down the speed problems on a laptop.

I've copied the conversation here so we could remove the information from the original instructable's comments.  I figure this would also be of some interest to other forum viewers who may have similar problems, or may be able to chip in. The long and short of it is, 92033 (Ed) has a refurbished laptop that takes literal hours to run a YouTube video on.  I suspect that it's due to a bottleneck with his internet connection.  Here's the conversation thus far: ---------------------------------------------------------------- 92033 (Ed): Thank you kindly for your prompt reply...appreciate it very much. I came across this site by accident in searching for something else and now I'm 'hooked' on it. :) So far I've read over 400 archived posts (whew)...as well as looking at the videos. The videos are somewhat of a problem because this new laptop only has 512 mg memory...LOOOOOng time to load. For example...to watch a SLOW 5-minute You Tube video takes 5-1/2 HOURS to load...keeps showing a couple words at a time...need to get two new memory chips to upgrade to 2gb. Thanks again...Take care. ---------------------------------------------------------------- eddems: I think you're basic download speed is killing ya, not the laptop. check you're speed at Internetfrog.com, if you see the link near the bottom for the old test, run it, I like it's graph of upload and download speed much better. ---------------------------------------------------------------- 92033: Thanks much. I'll check it out. I ordered a 1gb SDRAM Memory chip which just arrived yesterday. Hope this speeds things up a bit. ---------------------------------------------------------------- harley_rly: i hear u man, my computer is hopped up, but i live out in the sticks and have dialup...i only get 24kbps at most :( ---------------------------------------------------------------- 92033: Maybe there's hope for 'us' yet. :-) I phoned Tiger Direct to see cost of an upgrading memory chip to go from 512mg to 1-1/2gb. The guy I talked to suggested I get "PC TUNEUP 2.0" which bypasses the Windows Operating System (I'm using Windows XP Pro) and speeds up the system. I gave it a try and ordered the CD (cost $39.98 - $44.77 postpaid). It hasn't arrived yet but will let you know if it helps as he claims it will. He said that if I just ordered a 1gb memory chip my system wouldn't notice much improvement as it is, but this CD should do the trick. THEN...when I DO order the Memory chip(s) to get total of 2gb my system should zip through like a rocket with the CD just ordered. I'll let you know when I get the CD and about the results. Just hope I haven't thrown forty-five bucks to the wind. Thanks for the contact...appreciate hearing from you. TAKE CARE. ~ ED ---------------------------------------------------------------- Javin007: PC Tune-Up "bypasses the Windows Operating System?" This guy fed you a load of crap. (I work on computers for a living.) PC Tune-Up does nothing more than clean up registries, defragment harddrives (if your OS even needs it, some don't) and keeps drivers up to date (which you could do manually.) That guy's an idiot, or just a liar. Could be both. Unless you were buying PC Tuneup 2.0 from Tiger Direct, in which case we can add "sleazy salesman" to that. What are the specs of the laptop? Go to Start/Run and type in DXDIAG. This will give you a quick snapshot of the specs. Specifically, I'm curious as to the processor speed/type. For a 5 1/2 hour "load" you're more likely looking at network slowdown issues (although 512 megs for XP is WAYYYY too little. I HATE when they put PCs together like that). The RAM upgrade will show significant speed increases, but no improvement with YouTube videos or other downloads. I'm glad to see you are returning the CD. ---------------------------------------------------------------- 92033: Thanks much for your input...appreciate it very much. I checked the DXDIAG as you recommended. Here's the info on it: IBM ThinPad Laptop PC. Model # 23738TU. Intel Premium M 1.70GHZ. 512mb SDRAM Memory chip.Page File- 351mb used,513 mb available. Direct Version-Directx 9.00 (4.09.0000.0904). 512 mb SDRAM-Actual 212 Ram. AVAST Anti-Virus. MS Windows XP-PRO.. Dialup Speed-40kbps. PC2700 SDRAM 512mb Memory Chip installed. I ordered 1bb memory chip which arrived yesterday. Now I have to figure out HOW to remove the bottom of this laptop to install it...lotta small screws on it. :-) Oh, total memory shows 32mb. I don't know if this means much to you. I note your comment that the added RAM memory WONT (?) speed up loading YouTube videos? Is that correct? If so, why not? Thanks again. Take care. ~ ED ---------------------------------------------------------------- Javin007: :) At the risk of boring too many people, here's how memory in a PC works: You have two kinds of memory: RAM, and Hard Drive (technically there's three, as there's also onboard video RAM on video cards, but this is primarily used for 3D video game textures, so can be mostly ignored.) Your harddrive's read/write speed is determined by the type of harddrive it is (most are SATA now) and the rotation speed (most are 7200 RPM, though the specs for your system say yours is only 5400 RPM, but there are 10, 15, and even 20K rpm models out there that are exponentially more expensive.) No matter what, harddrive memory will always be degrees slower than RAM. RAM on the other hand is a small chunk of memory that is "temporary" memory, but very fast. Its speed is determined by the type of RAM (DDR2 being the current common one for notebooks, though DDR3 is available with some motherboards (you can ignore this, though, as you can only handle 2 gigs max of DDR with your system). The motherboard will determine the limits for the RAM that can be installed.) When running *ANYTHING* on your computer, and I mean ANYTHING, it must first be loaded into RAM to be accessed by the CPU. The computer doesn't directly access the harddrive. So this means when your operating system is loaded (Windows XP) the entirety of all running processes for the OS have to be loaded into RAM. Now, Microsoft claims that Windows XP only requires a minimum of 64 megs of RAM, but recommends 128 megs. I challenge you to find me a Windows XP system that only uses 128 megs out of the box. It's not atypical for an XP system to chew through all 512 megs of your RAM, leaving no RAM available for other applications. (Interestingly, the default setup for your laptop is only 256 megs of RAM, yet yours is reporting 512.) What happens when there's no RAM left? The system has to then start trading things into what is called "Virtual Memory." VM is nothing more than a file on the harddrive that will temporarily hold information that SHOULD be in RAM, so the RAM can load more info. For instance, say you have a process that's using RAM, but you want to watch your YouTube video. As the video is ready to play, the system will take the other process's data that's in RAM, write it to the harddrive, load your video into RAM in its place, play a portion of it, write the video to the harddrive, load the data for the process to RAM, let it run for a split second (so it doesn't lock up), write it back to the harddrive, load your video into RAM and play a short clip, etc. etc. etc. The result of low RAM on your system is that applications will open slowly (seconds or minutes, instead of instantly or a few seconds) and they will seem slow to respond, will stutter, etc. With enough RAM, your system can freely open as much as it needs into RAM, and ignore the virtual memory and all the slowdowns that it causes. Now, all of this being said, NO lack of RAM will cause a streaming video to take 5 1/2 hours to play. This is 100% going to be related to your downspeed. (Go to www.speedtest.net and post your results.) RAM slowdowns tend to be most noticeable when shutting down, or starting up your computer, apps will open a little more slowly, they will be slower to respond to button clicks, and video will be very choppy. Anything that is causing a YouTube video to take HOURS will be due to the system simply waiting to get the video in the first place. RAM wouldn't slow down the receiving of the video, but it would cause the video to play weird once it's downloaded. So, all this being said, here's the summary: Your system has a 1.7 Ghz processor, and your RAM is most likely 333 Mhz DDR. If you bump your memory up to a gig, you should see a pretty significant improvement in that your computer will, overall, just "feel" faster. It'll be more responsive, and working with large documents will be many, many times faster. This won't, however, affect your YouTube experience (unless you were getting jittery video often, not the same as "buffering" video.) If you see "buffering" for a long time, your internet connection is your bottleneck. A test on www.SpeedTest.net will likely confirm this. However, if you get decent numbers on SpeedTest, then we could have something more sinister going on, though I suspect you'll find your numbers well below the 1 mbps rate. This brings us to actually changing the RAM. I've been out of the PC hardware realm (professional programmer now) for a few years, and was unable to find a manual for your particular model. However, if memory serves, this image should be a fairly accurate representation of the underside of your system: http://www.javin-inc.com/temp/thinkpad.JPG Don't quote me, but I BELIEVE the red circle will indicate the only screw you will need to remove to access the RAM. There should also be a small clip holding the RAM in place that you'll want to pinch to get the RAM out, and make sure that the new RAM snaps into place. (Sometimes you'll have additional empty RAM beds, and you can just put your RAM in there and end up with 1.5 gigs, but I suspect you'll have two 256 gig chips in there.) ---------------------------------------------------------------- 92033: Phew. Thanks again for your most indepth educational lesson. I appreciate all your help more than you realize. I attempted to answer this last night, typing in more than twice the amount of text as your to me, then suddenly realized there was a glitch and I was on another page...lost it all into the ionisphere. :-( Rather than try to retype all I wrote, I shut 'r down and went to sleep. Now I'm trying to recall all I wrote last night but failed to get mailed. I'm not a traditional typist, rather a one-finger bloke so you can understand the frustration there. I do, however, type at a reasonably good speed. With that said, let's continue. I went to search for Configuration of this IBM Laptop ThinkPad 23738TU and am copy and pasting it here. It's relevant to what I have to say...here it is: ********************************************************************************** Overview Specs Features Includes Warranty Supplies IBM ThinkPad T42 2373 Specifications Part # 23738TU Key Specifications IBM ThinkPAD T42 2373 Manufacturer IBM Manufacturer Part # 23738TU Processor Type Intel Pentium M 735 1.7 GHz Data Bus Speed 400 MHz Cache Memory Type L2 cache Installed Size 2 MB RAM Installed Size 256 MB Technology DDR SDRAM Memory Speed 333 MHz System Type Notebook Storage Hard Drive 40 GB, 5400 rpm Storage Controller Type IDE Optical Storage Type DVD ROM Read Speed 24x (CD) / 8x (DVD) Display Type 14.1" TFT active matrix Graphics Processor / Vendor ATI MOBILITY RADEON 7500 Video Memory 32 MB Max. Resolution 1024 x 768 Audio Output Type Sound card Audio Codec AD1981B Compliant Standards DirectSound, AC '97, SoundMAX Telecom Modem Fax / modem Max. Transfer Rate 56 Kbps Protocols & Specifications ITU V.90 Networking Networking Network adapter Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet Expansion Expansion Slots Total 1 x front accessible Expansion Slots Total 2 ( 1 ) x memory 1 ( 1 ) x CardBus - type II Interfaces 1 x docking / port replicator, 240 pin docking 2 x Hi Speed USB, 4 pin USB Type A 1 x parallel, IEEE 1284 (EPP/ECP), 25 pin D Sub (DB25) 1 x display / video, VGA, 15 pin HD D Sub (HD 15) 1 x infrared, IrDA 1 x modem, phone line, RJ11 1 x network, Ethernet 10BaseT/100BaseTX, RJ45 1 x display / video, S video output, 4 pin mini DIN 1 x microphone, input, mini phone mono 3.5 mm 1 x headphones, output, mini phone stereo 3.5 mm Miscellaneous Features Locking device keyhole (cable lock), administrator password, hard drive password, power-on password, asset ID, IBM Embedded Security Subsystem 2.0 Compliant Standards ACPI 2.0, ACPI 1.0b, FCC Class B certified, CE, MPR II, UL, BSMI, cUL, NOM, VCCI-II Operating System Microsoft Windows XP Professional Software Included Adobe Acrobat Reader, PC Doctor, IBM Rapid Restore Ultra, IBM Update Connector, InterVideo WinDVD, IBM Access Connections, IBM Access Support, Access IBM,(OEM) Battery Technology lithium ion Capacity 4400 mAh Average Run Time 5 hour(s) Installed Qty 1 Ambient Temperature Min Operating Temperature 50 °F Max Operating Temperature 90 °F Humidity Range Operating 8 - 80% Dimensions (W x D x H) Unit 12.2 in x 10 in x 1.1 in Weight Unit 4.9 lbs Warranty 3 Years Limited Warranty on parts and labor. IBM 23738TU Summary ********************************************************************************* NOTE...I DON'T BELIEVE THIS...I JUST TYPED FORTY MINUTES REPLY HERE and it instantly scrolled up like speed of lightning and disappeared like last night. I'll ATTEMP to try again later. So please don't reply yet as you need to read my discoveries in changing the RAM chip. Meanwhile, thanks again...take care. ~ ED ******************************************************************************* TRY #3...I'm Back :-) Your diagram showing where the RAM chip is located was right on. Thanks. Here's my DISCOVERY :-( The RAM chip installed was NOT a 512mg...but only a 256mg chip. The ads ans specs say it's a 512mg...NOT SO. I was lied to by either the manufacturer or refurbishing company who removed the original 512 chip and reinstalled a 256 chip. I was lied to by the Tiger Direct guy on the phone. There are NOT two chip slots...only one. So I now have a useless removed 256mb RAM chip. Replaced with the 1gb RAM chip I just installed. So instead of having 1-1/2 gb RAM, I only have 1gb. Here's the crux. To. go to 2gb RAM I'd need to buy a full 2gb RAM CHIP and discard the 1gb for which I just paid $39.99 ($45.00 with s/h). This means another output of almost a hundred dollars plus the $45.00 just wasted because they wont accept return once the sealed chip plastic was opened...even though I had no idea there was only ONE SLOT in this PC instead of TWO like the Tiger Guy said. Now...crux #2...this new 1gb RAM does nothing more to increase speed. I just watched a 2.01 MINUTE YouTube video which took a HALF HOUR to load, so I threw the money away for nothing, eh? There is no noticeable change except the 'speed' shows it now as 41.2 kbps instead of 40 kbps. Okay...now HOW do I get to speed this thing up to normal viewing in real time? I also saw an ad for 4bg RAM Gateway laptop with 120gb hard drive for $404.99 which is all suped-up with everything. I had to upgrade a LOT since I got this only four months ago...taking over a hundred hours to load it, like Internet Explorer 5 to 6 and then to 8 and now to 9. I'm using AVAST Anti-Virus, after trying for 23 hours to get ADVAR, then find out it didn't load because of problem on the servor's end. Added Firefox and upgraded twice. Loaded MS Protection but it created more problems so I deleted it...now with AVAST which I like. Soooo...I've literally spent over 200 hours to get this thng where it's at now, plus the wasted money for the upgraded RAM chip.and I still don't have increased speed. HOW do I get it? IF the processor has to be changed does this mean I have to gut the thing and install a new motherboard? If so, what kind of money cost are we talking here? I bought this four months ago as a refurbished unit only because I was able to get it on payments of only $25.00 a month. If I had to wait to get $400.00 cash I'd never have it. :-) Okay...that's it for the moment. Thanks much again for your help offering and detailed instructions...appreciate it more than you realize. Best Wishes And God's Blessings To You And Yours In Everything Always. Most Respectfully... ~ ED  ---------------------------------------------------------------- Javin007: Well, let's start with the RAM. If you're running windows XP, you can assume all the extra processes (virus scanners, and whatnot) will be eating up about 512 megs of the RAM. First thing to do is check DXDIAG again (start/run) and verify that it's now reporting the correct amount of RAM. (Don't be surprised if it's like 9 hundred something megs or slightly more. It won't report 1024 or 1 gig.) This being said, that will leave you with the other 512 for your applications. This box won't be running the latest and greatest 3D games, but I suspect it was never intended to. If the heaviest hitter you'll have running is along the lines of photoshop, the 1 gig of RAM you have now should be plenty sufficient. I wouldn't worry about getting 2 gigs. Not for this rig, anyway. Also, Avast is a great (and free) virus protection, every bit as good as Symantec's Norton, so good choice there. If your youtube videos are choking out, we need to start by verifying that it's an actual speed throttling problem. Go to www.SpeedTest.net and run the speed test. Come back with the results.

Posted by Javin007 7 years ago