how to mount a bipod without a stud

How would i mount a bipod to this?I dont have a swivel stud or screw or anything. my gun is identical to this one.i am not sure if i even can have a screw in it because it is a tube-loader(there is a tube under the barrel and you slide the bullets into this. it can hold either 17 or 18 .22 long rifle.alllsssooooooooo. how would i make a nice non-knex bipod?

Posted by ledzep567 10 years ago

where can i find a strong (foldable if possible) bipod? Answered

I need a stong (foldable if possible) bipod, capable of supporting IaC's v5 (handheld) ~Operator99

Asked by matrix828 8 years ago

how can i build a good bipod for a sniper

I need a good bipod for my new knex sniper . any suggestens?

Posted by legomman200 8 years ago

grenade launcher or bipod? Answered

I have made tombuckey's crossbow (v1) and have a choice of either putting undermig's grenade launcher or the guns bipod underneath the barrel. which one would you choose and why?

Asked by chopstx 9 years ago

home made airsoft improvements

Hey.... i tryin to think of ways to improve my guns... I have 2 spring rifles (a good sniper and a crappy assaultish style) and 1 pistol (also spring)... it would be much appreciated if someone could make an instructable that would allow you to make a bipod that does not use tape to attach to gun (folding = happy), as well as a pistol that isnt a pen gone blowgun. add any other improvements also, such as your own scope rings that attach to weaver rails.

Posted by airsofter2 9 years ago

bipods for rifles

Well, im in the planning phase of making a new air rifle, i rly want to put a bipod on it this time. i have been looking all around the interwebs, but no success on finding plans/instructions/ideas on how to make one. so my question is, dose any 1 know how to make a bipod, or dose any 1 have any ideas/info or any contributions at all? My preferences are that it be made from something easy to get my hands on. And that it has some manner of folding away. Also, 1 request, no k'nex plz :)

Posted by chinnerz 8 years ago

What could it be...?

Hmm... PADBHAR? 9R per B. 2S per P. Hmm... [Bipod too, but that aint made yet] Pump action double barrel heavy assault rifle. 12 rounds per barrel. 2 shots per pump. Can fire one at a time or both at once. Removable Magazine/Hopper/Stripper Clip. Bipod to come.

Posted by ajleece 7 years ago

can someone make a good foldable bi-pod plz?

I really want a good bipod for a sniper im makin. plz help

Asked by ducati man 8 years ago

bi pod

I was wondering if someone could buid a bipod from knex or other stuff for my Nerf Recon (im clue less). If so PM me the instructions

Posted by alfpwns 9 years ago


Yep a free patch. But to save time click on my profile and go to my questions and you will see the contest in my questions. Comment and post your ideas there. This is to promote my question. So click on my profile and GO

Posted by ostomesto 7 years ago

What knex guns should I mod? Answered

I will be starting a series of gun add-ons like bipods, stocks, extended mags, scopes, and so on. If you have any ideas for guns that I could add any of the mods to, post a comment.

Asked by Torpe 8 years ago

NEW knex SPEC-9 sniper rifle- NOW RELEASED!!!!

IT IS POSTED! is a new gun that i will post (if you say u want it) AND keep. it is a big upgrade to the SPEC-9 pistol in range and decency. this will be posted both here and on knex innovationfull credit goes to oompa-loompa for the ammopartial credit goes to killerk for the bipodPROS-Better range than all my other guns combined (the house is not big enough to determine the range)-a slingshot-a great alternative to the SR-V1 for the piece-deprived-has modes for power or accuracy-uses a special barrel that has friction only where it's needed (this is achieved by putting the barrel upside-down except for the two parts closest to the trigger)-great range-to-parts ratio-new bipod can pivot around-rubberband does not fly off the gunCONS-terrible range compared to other slingshots (but the rubberband WAS stretched to the maximum)-bipod does not fold up-edit: now it does-the barrel has a weak point EDIT- PROBLEM SOLVEDshould i post?

Posted by DJ Radio 9 years ago

Best k'nex gun parts like handle etc.

Hi ! In this we can discuss the best barrels, handles, sights, triggers, bipods, tripods, and any other part of a k'nex gun from different instructables and even see these probably combined.

Posted by Thecoolestguyintheworld 9 years ago

Knex sr v2.

This is my version of the sr v2. it fires up to about 200ft, nothing really more (i used way better bands then the ones in the pictures). its accuracy is good up to about 50ft. i made it way stronger than the original one. credit goes to the_burrito_master for the bipod.

Posted by ~KGB~ 6 years ago

My new assault rifle

This is my new assault rifle and is officially the first gun I made without instructions. It uses shells to shoot, has a mag and a true trigger, also a sleek design and collapsible bipod. I was wondering what should I name it?

Posted by bruce911 9 years ago


I am trying to make knex super gun that has a magazine it can shoot through a can has 1 main gun and a backup gun attachment shoots 70-120 feet with 3 rubber bands true semi has a scope has less than 900 pieces is over 2 feet has a silencer a stock and a bipod

Posted by T-man 10 years ago

hunting and outdoors rec.

Anyone know ways of making a effective ghillie for hunting without using burlap...burlap tends to rip apart or fall offf over time and can be a hassle...or any bipods i can make for my rifle... and anything else that can be useful for hunting

Posted by soccerboi369 9 years ago

knex rifle upgrade

I moded the knex rifle to have a removeable bipod, scope, no broken peaces, thumb hole, and a true triger. i will put pictures in lator. should i post it as an instructable? update: just finshed making a sight, one of those knife things you can stick on the top of the gun, and a way to lode the bullet more like a rifle. but i cant fit the pictures in the froum lol.

Posted by dsman195276 10 years ago

What airsoft sniper should i get?

There a few guns and I was looking at and one is the ECHO 1 M28 sniper that shots 500+ fps and comes with a bipod and is a bolt action spring gun. The other gun is the Airsoft GI I4-A3 DMR airsoft gun. this gun is an automatic and shoots 290-300 fps. The ECHO 1 M28 is $175.00 with free shipping. The Airsoft GI I4-A3 DMR airsoft gun is $355.00 with free shipping and that includes me buying the charger is $35.00 the bipod is $35.00 the battery is $35.00 the gun alone is $245.00. I would like your guys opinion on what gun I should get I will post pics and videos of these guns please rate comment and subscribe. ECHO 1 M28 link Airsoft GI I4-A3 DMR link

Asked by slimshaddy 6 years ago

Knex gun questions...

I have a few questions 1. What is true trigger? what does it do? 2. Is a gun that fires bullets through a ram a RBG? 3. Would a gun powered by a ram get the bullets out of a extra long barrel? 4. what's the difference between slide action and bolt action? 5. How would you make a cock? 6. What's a bipod? 7. How would you build a fixed mag? If I have any more questions, I'll edit the topic and bump the topic

Posted by DJ Radio 9 years ago

K'NEX M249 SAW / FN Minimi

Hey guys! Well, this is my most recent project, the M249 SAW (Squad Automatic Weapon). While the body may look simple enough, I can tell you that this project is no laughing matter. It is sturdy (mostly) and has an amazing pin pull, but is not yet finished. I am not sure weather it will fire a round out of the magazine, and if it did, I am not quite sure if the round wont hit the front sight. It needs a magazine lock (the mag will fall out if you don't hold it in with your hand), the stock connection is not sturdy in any way, and the back sight needs some work. All the same, this is the first accurate looking M249 SAW on 'ibles, and I hope that I can get it "up (my) to standards." Features: Nice looking box magazine Comfortable Sturdy 16 round magazine (ish) Accurate looking (M249 / FN Minimi) Shoots a yellow rod about 20 - 30 ft. Bipod attaches nicely Bipod is strudy Stock looks boss (IMO) Tell me how you think I can improve the gun, I am always open to suggestions. Enjoy! -The Red Book of Westmarch

Posted by The Red Book of Westmarch 4 years ago

SR commado v1 review

I got around to trying out one of dj raidos gunsso i tryed the SR commado v1What to expect:Strength:9/10very strong (but there are weak parts) but mostly strongRange:8/10 good sive and ok range i get 20 ft with easeLooks:9/10i think it looks very werid (but yet ausome) and also kinda looks like a future weponParts:7/10 like most of his guns are pretty low peiceHandle: 7/10 the real handle is kinda small (but i use it more as a grip)Stock:8/10 very sturdy and strong(rock solid)Barrel:8/10 a decent barrel but it can only take sow much powerFake barrel:9/10 very sturdy and good sizeadd onsBipod:7/10 not the best (but he made a low peice bipod )scope:6/10 you really can use the scopeIn the end:fatamizama morguiam!=(totaly ausomes)To finish it up: a very good gun and i would recomed it to every bodythank you for reading my frist review knex sbf(and also thanks to dj raido)(i would give you a link but my pc wont let me)

Posted by knexsuperbuilderfreak 9 years ago

DGM's Blazer Sniper Rifle

I am reviewing Darth Gecko Man's latest sniper! What to expect: Strength: 8/10 Why: Small chance it will break. Range: 7/10 Why: Too effected by wind with the original bullet Looks: 8/10 Why: Looks good. It is nice and small. Parts: Handle: 5/10 Why: Way too small. Cant fit my hand Stock: 0/10 Why: No Stock!!!! Barrel: 0/10 Why: No Barrel! Fake barrel: 8/10 Why: Works easily and look good Bipod: 0/10 Why: No bipod!!! (This is not necissary. I am just noting that it does not have one. Please no more argueing) Modability: 10/10 Why: This gun is very easy to modify and would be great for beginners to play around with. Even I made a mod of it by adding a stock and moving the front handle to the rear and making the rear handle part of the stock. In the end: Erganomics are not too good. Feels too small. BUT in a knex war it would be good not as a sniper but as a secondary weapon. The trigger system cant hold too much pressure but for a medium range weapon it is good Creator: Darth Gecko Man Gun: Blazer v1 Sniper Rifle

Posted by ajleece 9 years ago

Knex sniper rifle

I have a partially completed sniper at home and i wanted to know if you guys want me to finish and post it, i mean, theres no point posting if it gets a cr*p reception, eh? And it is currently unnamed so i am open to suggestions about that aswell. At the moment it has a cool carrying strap (not mine), a bolt loading system (classic) a bipod, a monopod, and a nifty scope (not mine) I am also working on a new mech for possible semi auto, ill get back to you if it gets anywhere.

Posted by jellybean10122 9 years ago

A bullpup SR-v2 (just the desin of it )

To start I know the true definition of bullpup is mag behind the handle but i does not matter. I made it on MLcad as you can see, it will probably be my last sling shot i make so i want it to be the best i have made so If you have any thing that would improve it, tell me (sorry for using bold but people will see it) i will probly try and put a... safety a winch( to make loading easier) 2 bipod locations ammo storage and what ever else anyone can think of

Posted by ninjusk 7 years ago

Longbow SR-L v2 -Now posted

I thought the old version (second pic) would be final, but I found out i had several parts, so I modded the top rail a little bit.This was going to be a sniper rifle ,the SPEC-9 v2, but I added a bow to decrease loading time and to make the design work. The major improvements over v1 are the stock, barrel, and it has a new sight now.I would call the longbow SR-l the SPEC-9 v2...This is possibly the biggest knex object I have made.PROS- true trigger- very powerful- good range (70-90 feet)- very accurate- has a sight- better stock- has a collapsible bipod- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)- NEVER jams or misfiresCONS- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)credits:stock- bartboyBipod- KillerKI do not have a final range because The only place where I can test my sniper bow is blocked by my christmas tree. final range- 70-90 feet.its a combo of my SPEC-9 sniper rifle and my longbow SR-l crossbow.It is coming out this Saturday at the earliest, but im not 100% sure.

Posted by DJ Radio 9 years ago


Say hello to RAMSR, the most efficient mag fed pin sniper to date. It has a rubber butt plate, a folding bipod, scope, true trigger, cheek rest, a shell ejecting system, and an internal magazine. it also has a pin guide and fake bolt action. the mag holds 7 red rods, or 4 red rods with shells. Shoots hard. (RAMSR= Reconaissance Advanced Master Sniper Rifle) Should I post? EDIT: I modded it so it almost never jams, and I fixed all of the problems with the shell system. I also gave it a better trigger. the pin bends too much for my liking. it has a pin guide. help?

Posted by rec0n 7 years ago

Airsoft M14 update.

Some of you may already know that ive started to upgrade my airsoft M14. so far, ive bought a scope, a rail, a bipod, a sling, and 2 spare magazines. ive also bought some other airsoft equipment, and i just have a bit more to buy then i can start airsofting. ive spent roughly €500 on all of the equipment and im happy with what ive bought so far. for more pictures go to "My airsoft M14" instructable. im also working on bringing my account back to life, as in posting more things, such as airsoft instructables. tell me what you think!

Posted by ~KGB~ 6 years ago

K'nex M4 Carbine

About time I made an M4 carbine. The farthest shooting/accurate and sturdiest gun i've made to date mostly due to the muzzle loading. WHAT!!! NO MAGAZINE!!! yep, it was abandoned due to horrible range and often jams. It's more of a sniper than an assault rifle and is extremely accurate with a grey rod + grey connector. It uses a modded dsmans barrel for maximum accuracy and distance, accuracy due to the barrel going through the forgrip. I also added a 4-railed foregrip for attachments such as virtical foregrip (shown in pic), bipod, dot scope, lights/lasers, or anything that can attach. Tell me what you guys think.

Posted by Trauts 9 years ago

Show your K'nex 'Armory'

I know there are a few other topics around here in which people show their guns, but I didn't find an official topic for it ( At least not on the KNEX GUNNERS forum ). So I made one! To start it of, here are all my guns. HK.RBG.armorer's Gnasher Shotgun Perfect Duck's Red Impact KillerK's K'nex gun Ipod Killers Sniper Rifle ( Long barrel, extra large mag, bipod and shoulder piece included ) Perfect Duck's Dual Pistols Perfect Duck's Quad Blaster Jeromy's Knex Samus Arm Gun ( Probably won't keep this though ) Outside of this pic I also have You's semi-auto prototype and a couple of half K'nex guns I broke down for pieces.

Posted by Dutchj 10 years ago

What You've All Been Waiting For!

Since eberyone doubts it here (finally) are the first pictures of part 3 of project firestorm. They may not be good but the camera had basicly no power so I only got these three. they show my foully modded version with collapseable bipod, ammo storage rack and the cellphone sight v2. the ammo storage was inspired by the trifle 18 turret and holds you guessed it 18 bullets. It looks alot like the storm 220/221 v2's and the morreti sr4 by burrito master (sorry if the names wrong). it is true bolt action and was originally made in january (I think) I rediscovered it in june and remade it into what you see here. Well enough talk just see for yourself! ps if you can make from the pictures I'll let you do the instructable pps this won't be posted for ages

Posted by Fred the Penguin 8 years ago

FX-9 Sniper Rifle

Here it is, The one the only FX-9 Sniper rifle!!!This is the first of five in the FX-9 series. This has been my secret project for the last 2 1/2 months. Here are the pros and cons: Pros: Range 70-80 feet weighs 5 1/2 Pounds sturdy reliable new trigger design 11 layer design cons: uses a lot of pieces no mag bad bipod but if I post I will make a different one Now that you know about it tell me what you think. Should I post it?

Posted by Killer~SafeCracker 9 years ago

Dutchj's K'nex Rifle V2 ( UPDATED )

This is the gun I'm currently working on, the second version of my rifle. To call it an improved version of my first rifle is not appropriate here, as I designed this one from scratch. It's not finished yet, but I can list the features it has now: 14 shot yellow rod removable magazine Low friction, tilted firing pin on a rail ( with red connector for easier pull-back action ) Adjustable stock ( 3 positions ) Comfortable handles and stock True trigger ( duh ) Possibility to add bipod To do/fix list: Design scope + attachment mechanism [DONE] Fix minor reliability issue ( The gun needs a high amount of power to shoot reliably ) [FIXED] Fix fake barrel ( may intertwine with reliability issue ) [FIXED] Design a bipod [DONE] Design a better stock [DONE] ( The one in the third picture ) Lower stock for more comfort [DONE] Extend fake barrel a bit for better looks [DONE] Any good suggestions you guys may give me ; ) Any constructive criticism is appreciated. EDIT: Here's the video I promised I would post today. I know I said I was going to post this gun this week, but as it turned out, I didn't have as much free time as I hoped. The video shows the following: Inserting the magazine Firing the gun Demonstration of bipod Demonstration of sights and scope Demonstration of adjustable/removable stock. EDIT 2: I've been working on this gun quite a lot, and I've tested the crap out of it. This is what the latest version looks like. The more observant people among you will notice that it is not a rifle anymore. I've made it SMG size to make it a lot easier to work with, and to save parts. A longer barrel can be added pretty easily, thus it will posted in it's current form. Now for the changes: A big improvement on the barrel, which is now a connector barrel instead of a tan/cut grey barrel. This makes it a lot more powerfull then the previous versions. I have had some problems with the firing pin, but it has held up nicely as it is now. The pull-back range of the firing pin is also at its maximum, because it is on a rail I don't need to have any part of the firing pin inside the barrel behind the trigger to keep it stable. This gives it an edge over other guns with less pull-back. It took me quite a while to actually get it to this point, because it would jam all the time. Come to think of it I should have tried the more obvious thing first, as it seems to work fine now, though I recall it jamming before. One of the good things about this, is that it uses only 5 exotic parts. 4 black Y connectors, and 1 K'nex man head top. I know some of you may not have the latter, but it is absolutely necessary, as without it the firing pin would mess up the barrel or vice-versa. Finally I would like to note that this gun can be modded to use the rails that Ironman69 came up with. The rear sights can be used in the same way on the stock version. Well, that concludes my wall of text for now. This topic is getting mighty big, is it? Anyway, I hope to see some thought trough comments on this, not just "post!". Constructive criticism, as always, is more then welcome.

Posted by Dutchj 9 years ago

TNKIT entry and FN SCAR H (Now with pictures)

This is my TNKIT entry, an F1 based car. It has built-in suspension (not independent, but on the axle), and realistic features. The last pictures are of my new assault rifle, an FN SCAR replica. The stock is different because of the internal ram mechanism, and it has Ironman rails top and bottom, with strange new rails on the sides, which hold a bipod at the moment. An ironman mag adaption allows for extremely quick mag changing, with the release lever an inch from the trigger at the front of the trigger guard. The flip-up iron sights have been modified since these pictures, and the barrel (area with the bottom rail, not the false barrel at the end) has been shortened by 2 units, making the weapon more realistic and easier to use. Uses lots and lots of y clips and hinges, and requires about 6 cut white rods (can get away with 5). The EGLM fires a large projectlie using a push trigger behind the mag (in front of and below the handle). Also for your enjoyment; my MP5 from May.

Posted by knexguy 8 years ago

Knex sniper rifle

HI. This is my new knex sniper rifle that i made. Here are some features. 1 the ram dosent fall out, the ram dosent stick out of the gun, begging true trigger, fires yellow rods, powerful, sturdy desine for minimum breaking, recoil is in the mid to balance it out, detachable tripod or bipod, and its longer than my paint ball gun. Here are some pics, if you like go to dannys fourum topic and vote on is the pic order.1 as you can see this sniper is longer than my paintball gun2 Hahahahahah i got more knex than yoooouuuu!!! =P3 this is the trigger mechinisum when its not pulled. 4 Sorry for the blurry pic but this is the trigger when pulled.5 looking at the stock of the gun.6 The front7 The chamber where you put the rods in8 a last look at the trigger mech.9 the whole gun. Beuty eh?I hope you like this, dont forget to vote on this in dannys fourum.

Posted by knex hater hater 11 years ago

Z35 parts lists!

Ok the Z35 is ausome but no parts list that it accurat to all models i mad one its easy you just pic thones that you want like trigger guard,chamber door,etc. but he had a parts list but i hade to go back and grab some more parts here and there so i made this i will list if it is nesserary or not. body shell: 1: with chamber slide and trigger guard: rods: green:86 white:22 connectors: dark gray:2 ltgray:2 red:2 green:4 yellow:50 blue:6 white:2 2: with chamber slide,without trigger guard: rods: green:86 white:22 connectors: dark gray:2 ltgray:2 red:2 green:4 yellow:52 blue:4 white:2 3: without chamber slide,with trigger guard: rods: green:90 white:24 connectors: dark gray:2 ltgray:2 red:2 green:4 yellow:48 blue:6 white:4 4: without chamber slide or trigger guard: rods: green:82 white:24 connectors: dark gray:2 ltgray:2 red:2 green:4 yellow:50 blue:4 white:4 sights(needed): rods: green:14 white:4 blue:3 red:1 connectors: red:3 green:3 yellow:6 other: ball socket:16 track connector:1 barrel 1: 1: with chamber slide rods: green:30 white:3 blue:2 connectors: red:3 yellow:26 blue:2 other: y clip:15 2: without chamber slide: rods: green:30 white:3 blue:2 connectors: red:3 yellow:24 blue:4 other: yclip:15 barrel 2: 1: with bipod and/or carrying strap: rods: green18 white:2 blue8 connectors: orange:11 red:3 yellow:4 other: blue clip:3 2: with carrying strap without bipod: rods: green18 white:1 blue8 connectors: orange:13 red:3 yellow:2 other: blue clip:3 IM STOPING HERE I WILL ADD MORE EVERY DAY

Posted by knexsuperbuilderfreak 8 years ago

Z35 K'nex Assault Rifle: Review

Here is the review for the Z35 K'nex Assault Rifle by Oblivitus.What to expect:Innovation: 9/10 Very innovative loading system. It also has a new trigger system. Strength: 9/10 Very strong. The one weak part is the handle, the connection to the body is weak.Range: 8/10 The range is good for a mag gun, about 40-45 feet.Looks: 9/10 One of the better looking guns on this site. The one thing that could make it look better is using less blue rods.Parts: 9/10 Uses quite a few parts, But it's worth it. Handle: 7/10 The handle is good but the connection is weak.Stock: 9/10 very sturdy Barrel: 10/10 Innovative slide mech. Trigger is very innovative as well. Magazine: 9/10 New and doesn't use cut parts.Extras. Bipod:8/10 not the best but it holds up the gun.At the end: I would give the gun 9/10.Here is the link to the gun. for reading.Killer~SafeCracker

Posted by Killer~SafeCracker 8 years ago

Ar-4 Commando V2 Review

Ok, lets have a look at the latest creation of Dj Radio!The Ar-4 Commando V2!What to expect:Strength: 8/10 Why: Small chance it will break.Range: 8/10 Why: Very good range.Looks: 9,5/10 Why: It looks great and very realistic!Parts:Handle: 8/10 Why: Just because it rules comfyness (new word)!Stock: 7,5/10 Why: A bit on the bulky side.Barrel: 7/10 Why: sometimes jams because of the tan design.Fake barrel: 8/10 Why: Just because it rules!Bipod: 7/10 Why: It's only for show.Add-ons: 9/10 Why: Bi-pod + Expandable mag = Just Awesome!In the end:The Ar-4 commando V2 is great fun and a must build for any knex gun enthusiast!The range is pretty high and the stock is very comfy.To round it up: Just Awesome!Creator: Dj RadioGun: Ar-4 Commando V2Reviewer: Viccie.B1993Hope you enjoyed the review and, have lots of fun with the Instructables site!Rights are owned by Dj Radio.I had permission to review.Viccie.B1993 and Dj Radio,

Posted by Skreetsha 9 years ago

AR-4 Commando v3: Review

Here is the review for the AR-4 Commando v3 by DJ Radio.What to expect:Innovation: 10/10 Very innovative new rail system, and loading design. Strength: 9/10 He did a very good job of making it strong with the amount of pieces used.Range: 7/10 It is not much better than any other ram rod. But I got an average of about 20 feet.Looks: 8/10 I think it looks ok. It is by far his best looking gun.Parts: 9/10 uses about 1000 pieces. So I would call it low piece. Handle: 7/10 the handle is a little too small for me but it might work for others.Stock: 9/10 very sturdy Barrel: 8/10 Innovative. and it has a low friction barrel. Fake barrel: 7/10 bullets get stuck occasionally. Magazine: 7/10 new and innovative but jams occasionally Extras. Bipod:8/10 not the best but it holds up the gun.scope:8/10 It works good.At the end: I would give the gun 8/10.Here is the link to the gun. for reading.

Posted by Killer~SafeCracker 8 years ago

-+-POSTED!-+- Jollex's Sniper, JS-144v3.9 =UPDATE=

It has been posted. Here is the link.UPDATEI added an extended barrel, because of The Jamalam's suggestion, and I weighed it and it is 1.6 Kilograms which equals ~ 3.5 pounds.UpdateI changed the mag and reinforced some parts.I have finally finished my awesome sniper. I have been planning this gun since June and started building about 2 weeks ago. It is the first of its kind. It uses a rail system like dsman195276's sniper but it has a mag. It has a lot of power and accuracy because of the low friction barrel made out of orange connectors and wheels. It has a trigger that I think is better than dsman's sniper trigger. It has a comfy handle that is like dsman's sniper handle. It has a comfy stock a very accurate and cool looking scope. It also has a sturdy bipod of my design and a comfy front hand grip. it is also easy to pull back the firing pin. the mag capacity is ~10. Mag reload time is ~8 seconds. Time to pull back firing pin and power transfer and fire is ~4 seconds. Here are some pictures.

Posted by jollex 9 years ago

K'nex Sniper thoughts?

I'm drawing up some mental plans for a Sniper rifle. I posted some non-gun k'nex projects but they were never as popular as weaponry. I know there's a tonne of K'nex snipers out there already, but most of them underneath the body are just a basic gun with a blue rod mag, and a lot of the time the mag isn't actually removable. Of course there's nothing wrong with this, I myself have made guns with this setup. However, for my new Sniper, I want a removable mag with lesser-used ammo. I was thinking either orange-connector+grey connector ammo or yellow rods. Basically I wanted to see what the community wants the most, aside from Oodammo, because that's a tad awkward!  Also any suggestions as to what else I should add to my Sniper? I was thinking: Removable Mag, breach loading single shot chamber, rails (like ironman's), detachable scope and Bipod, rear monopod, true trigger (of course), pin guides and maybe a section where a small pistol can fit, probably TheDunkis' flat pistol or r3con's (spelling?) mod for it. Oh and maybe a heartbeat sensor for all the MW2 fans out there XD -Lowney

Posted by Lowney 7 years ago

DM-15 bolt action sniper

Well, all the great K'nex gunners have snipers(besides oodalumps , but his semi-auto makes up for that :-) ), so I thought i would make one. its nothing really new, nothing innovative. Just that it has a bolt to pull back the ram, that allows for rapid fire. It's could be as powerful as the other snipers but i can't put to much power because i have to pull the ram back with one hand(i am wimpy so you guys will have more power). it has a 9 round mag that could be extended if you wanted. Has a block trigger hooked up to a true trigger. The front is just a make barrel. Bipod folds up and hooks onto the front of the fake barrel. i am sorry that the bolt is hard to see in the gun, it on the right side. only the left side is shown in the first two pics. its in the third pic but is kind of hard to see. it works by having a "door" in the side of the barrel for the bold to travel in and out of. the bolt need tape because the orange connectors would come off instead of pulling back the ram(the ram is the same from the pack sniper). it has just your basic scope on it, nothing to new on that part. yea, i think thats it. instructions are being made.

Posted by dsman195276 10 years ago

AR-4 Commando v3-NOW POSTED

Posted!Do you think this gun makes the AR-4 v2 look like a noob's toy? plz answer!This is a new bolt-action knex assault rifle I made. It shoots Yellow rods. This gun is the first bolt action to my knowledge that doesnt use modded part.For those of you who dont think it is true bolt action, to shoot the gun, you have to pull the ram/bolt back, then push the bolt back while leaving the ram pulled back.STATS-Bolt-action-True trigger-includes bipod (foldable)-tight looks-includes scope-6 round hopper-30-40 foot range (one rubberband doubled up)-Safety (new)EDIT- I have put tape on the part of the bolt that pulls the firing pin back, and it gets an increased range. the tape straightens the parts that hold the bolt, decreasing friction.This started out as one of my failed projects, I made it before the jackal and showed it to ajleece and some others. The original one had a bottom loading removable mag, shot blue rods 5 feet. I took it apart to make my jackal, and then I got the idea to make it a true bolt action.I was not trying to compete with the ZKAR, I was just trying to make my AR-4 v3 work.Here is a video of me firing it on youtube:

Posted by DJ Radio 8 years ago

IAC's Heavy knex Crossbow Review!!

Well here is a review of the cannon so that you know YOU NEED TO BUILD IT. Well here is a video . Next comes the review. PERFORMANCE range: 8/10 75 feet not angled about 90 angled a little. ROF: 5/10 The rate is good for a cannon like thing but for every shot I would say about 7 seconds or less with a lot of practice Reload time: 6/10 about 15 seconds COMFORT Handle: 7/10 good for a cannon but there are better Stock: 8/10 Its a good stock it supportive but not extremely comfortable Second hand placement: 6/10 I feel like my hand is stretched to far when I put it at the way front of the gun and when I put it on the barrel it bends LOOKS AND STRENGTHS Looks: 9/10 well its big so already its amazing and in my opinion it looks pretty good Barrel strength: 8/10 the barrel is really strong for rubberbands but it bends vertically Handle attachment: 10/10 I can lift the gun with only the handle and it is very heavy Bipod: 7/10 Strong but not portable as said by Mr.Muggle Bow: 9/10 Very strong period Overall this gun is like 9/10. That is off my opinion not by calculation Well I'm done so now you need to go build it.

Posted by sprout_less 8 years ago

My New-ish Sniper

Well, a few people knew about this, and I finally got around to putting up some pics. It has a new-ish handle that is really simple yet comfy, a new-ish handgrip that is simple yet comfy, a new-ish barrel that is out of the norm, a removable red rod mag, nine connectors of friction and a full black rod of ram pullback, a true trigger(duh), and a swinging bipod that attatches to the barrel when not in use. That's it for the pros. Now, it's rather bulky, it has so-so power(though I never really went for that), the barrel is sorta flimsy(workin on that), the trigger tends to not take too much pressure(workin on that), and the stock is wierd lookin. That's it for the cons. Yes, yes,yes,yes I know my camera is's too bright in all lighting.... Ironically, I finished this two days before school starts, so I don't know when I'd be able to post it, if I intended to...but say your thoughts on it anyway.... Oh, and by the way, if you fell like leaving a random or off topic comment, I'm no Nazi *cough*TheDunkis*cough*.... I got to type this all over again, because it would seem that the first time, the pictures wouldn't upload.... If you need more pics of it, let meh know! Also, just to let you guys know, I had two options: 1- let this thing have more jams than a Smuckers factory, or 2- make it so it cant jam, but you have to lightly tap the pusher for it to shoot. I went with the latter, so it adds like one second to the firing rate....

Posted by apples!!!!! 9 years ago

AR-4 v3 mods.

Ok, so I made some mods to my AR-4 v3. There are 3 major mods, a couple of other minor cosmetic mods, and one performance mod. Picture 2- minor stock mod. This mod allows people to extend their stocks to make it longer. Picture 3- New hopper based off of Killerboy's removable mags. Major mod. By using his hopper as a fixed mag, It now allows me to hold 9 yellow rods, which is pretty big. It does jam, but rarely. The rounds will all stay in the hopper if you vigorously shake it, and you can remove the rounds pretty easily. Picture 4- Minor trigger mod. All it is is replacing the hinge with 2 Y connectors, a white rod, and a purple one slot connector. Picture 5- Scope mod. This connects the scope to the top of the gun, making it a better hand grip for carrying. Picture 6- Yet another scope mod. This mod was made to adapt to the new fake barrel, which was filled up instead of only the middle row having the orange connectors. Picture 7- Mod to the bottom of the gun. The last one was just having blue rods, this one fills it up with connectors. Picture 8- Foregrip mod. This is the second of the 3 major mods. I did away with the bipod and modded the bottom to have a new grip. Mainly a comfort mod. Picture 9- Barrel mod. The last major mod. This mod was made after several people noted that the ammo needed some 'Help' to get into the barrel. I basically just filled in the hollow area where the ammo would jump from the hopper to the barrel, so you dont have to stick your finger in. Picture taken from top of gun. That stuff above it is what you connect the scope to.

Posted by DJ Radio 8 years ago

My random bullpup model

So Dr. Richy posted his CAR which drew a little inspiration from this weapon that I posted on Red's wall in hopes he just might be able to turn it into a firing weapon. However, as I suspected, that's just not an easy task and I didn't expect it to happen. So I'm gonna just throw this out there and show anyone that didn't see it. It's made to be convincing, it could probably be turned into a real firearm. It's a bullpup designed to take 5.56 NATO rounds. I designed it to be somewhat ergonomic and compact. It has the front grip from...I don't even know how long that I used on my UMP. It's pretty simple, reasonably comfortable, and lets you quickly attach any front grip or bipod you can come up with. The muzzle was made from a new concept for a rounded barrel that could be used as a real K'nex barrel. This can also take a very cruddy and simple silencer attachment (which is actually just my Master Sword handle that I never wanted to disassemble). Then I added a basic rail on top that allows it to take airsoft or real rail accessories. It's not perfect, but you can get the accessories to grip into the grooves. I added a fake charging handle that is located in a decent, but not optimal position. This flows into a cheek rest of sorts that's rather close to the back of the gun so it can accommodate the charging handle pin. Your head is kinda cramped against your shoulder, but your face itself is comfortable aiming. And the front sight is detachable if you were to add a rail sight. I'm thinking I'll probably make a new one tonight for fun. It'll be shorter to be similar in size to a PDR. However, I might (not a definite) give it exchangeable fake barrels based on this one that allows it to lock in with a single pin. Secondly, I'm going to change the front to include an integrated folding forehandle that will also be comfortable to hold folded. Or so I hope. I'm also going to move the charging handle forward and make the roof one and the same with the rail to slim it down ever so slightly. This will also move the cheek rest forward to a more accurate position like on Dr. Richy's. Finally, I hope to add some nifty features but I'm not sure at all on these. One would be a bolt lock which probably wouldn't be too hard. It'd basically be like the charging handle is a firing pin and the bolt release would be a trigger, just mounted differently on the gun. And then the harder one would be to make a magazine release near the handle like on a PDR instead of the current one I use that makes you have to "strip" the magazine. On a real gun, this would be a great feature for making reloads a lot faster.

Posted by TheDunkis 4 years ago

Knex Firepower Standard

Hello everyone I (like alot of my freinds) get tired of... oh why dont you just search "Knex gun" and look at the mini descriptions and read them all, or maybe most and think what alot have us geting tired of, Go ahead! see you in maybe a min or 2? just click back or whatever to return here! and continue from where you last read.Welcome back! Do you see what what I'm talking about? well there are two things and if you did not notice these things feel free to look again!And what is Sypran talking about? (drumroll) the Quotes "It's very powerful" "easy yet powerful knex gun" "gun shoots about 60-70 feet" "this is a very small gun but will fire about 50 feet" "A deadly knex gun" and that is just the first page! i could go on for hours (ok maybe a long time) of coppy and pasteing these quotes!honestly i see to much "easy yet powerfuls" i cant realy tell what is powerful! so what do we do? well we take out time building maybe some and it turns to be not that great or it is great!, or we rush to see if KILLERK, Mepain, Extreme builder, Trainman2000 (i will always call him that >=D)You (aka mykhailo),Perfect duck,loosewire,Dsman19(i cant rember numbers) Oodalumps, am i forgeting anyone? (tell me if i am) has any new ideas/ what do we need to do? WE NEED A FIREPOWER STANDARD something simple like 1-20 and how to mesure it, in earth science they clasify rocks hardnes by what they scratch (nail 2.5 glass 5.5 and so on) we need it something like paper peice, but not that for some guns have alot of power but cant peice due to low velocity and or dull non sharpened bullets.also if you know anything about real guns the bigger the bullet, the more powerful =D but the smaller the bullet the higher peirce rateing (a 0mm would be the best peirce but little damage) so in other words the biger the bullet (45 cal example) the more stoping power it will have but less muzzle velocity (pierceing ability) wile the smaller (7mm) the knocking over/stoping power is anything to be desired, but it will have high muzzle velocity so peirce through more materials. yet with (if it was at all posible) a 0mm (or basicly nothingness) in theory could peirce through ANYTHING but would not stop the person or thing in any way so the same pricable stands for knex notice the shotguns that shoot conectors (or killerks magnum with his amo) create a biger bang sound, they do more damage, but need more force to get all that mass through a paper wile the ones that shoot sharpened (like gorkem's) or greens can peirce paper with ease. so not only will we need a firepower test but a peirce test. peirce is easy enough its velocity and ammo size and a variable if it is sharpend and we have an instructable on how to determin bullet speed. power is bullet size+ extentions (killerk's magnum ammo like) also a little velocitybut the system needs a ruberband standard to keep in mind no putting on more then the systems amount of ruber bands or size of ruber bands (i know people will do this anyway)so what am i basicly saying in this topic? easy please people we need records of bullets speeds for sertain bullets with your guns it is easy since most of you seem to have digital cameras and there is an instructable about it. also we need to know a standard RB cause i dont know whats standard in the rest of the world besides USA and even then i dont know if its standard in the other states (they say americans like everything bigger and sadly sometimes it's true)i have tested some guns out and lets say that stong yet easys from the first page so far are low... so maybe we need a test for difrent kinds of guns! i have seen rifles that fire like a medium pistol (for they are exept they have a longer barrel, bipod, stock, and scope) should these even be given a 6 out of 10 in every catagory? or should it be 2 outa 10 for rifles. if lets say we got a standard of ruberbands to be 2 (not including trigger ruberbands) that where (makeing this up) a circumfrance of 3 inches, end of barrel being 2 feet away from camerathe adverage gun (all makeing up still) 25 feet with white shooting 1 foot per sec, does not dent an empty can. bullet speed of 5 feet per second with a max range of 40 feet (acurate ranges ppl use mesuring tape) with a white bullet that dents and peirce through an empty can we can conclude that the gun has high peirce rate but beter then normal power rateing. so a 7/10 for peirce if best was a max of 60 ft bullet speed of 10 ft per sec and white rods then it could have scored day when i search "knex gun" i want to see "my first Sniper!, it scored a 7/10 firepower and 8/10 pierce with 100ft range" cause then i can say that is a good gun I'm going to build!

Posted by Sypran 10 years ago