how does a monarch butterfly chrysalis have gold dots on it? Answered

It looks metallic but I cant see how an insect could produce it?

Asked by pleb 8 years ago


how to make butterflies out of wire?

I need a butterfly wired stand for a wedding. i need ideas on how i can make those

Asked by 8 years ago


is it possible to keep a cocoon alive in a artificial habitat?

Trying to keep a cocoon in a artificial habitat until it turns into a butterlfly

Asked by topher61974 9 years ago


The Swallowtail Challenge.

Apparently, swallowtail butterflies have posed a bit of a puzzle to the sort of chap that studies that sort of thing. Butterflies actually have two pairs of wings - fore and aft, if you like.  Most butterflies have these pairs separated, to allow greater control over their flight, but swallowtail wings overlap, effectively becoming a single wing. They are stuck with a simple up-and-down flap.  The puzzle was; where does the control come from. It is hard to measure the forces acting on and in a live butterfly, so the researchers built a model - a small version of the hobbyists rubber-powered ornithopter, the same size and weight of a real swallowtail. They cast replica wings from fluorocarbons and polyurethane, and set it off in front of slow-motion video cameras. The conclusion? The unique shape of the wing provides automatic control - the combination of flexibility of the wing and the rigidity of the veins provide a passive control and stability. The point? Why am I posting this here?  As a challenge: the swallowtail ornithopter was (except for the wings), very basic - wire frame and a rubber band. How small could such an aircraft go? How tiny could you, dear reader, build a working ornithopter? Institute of Physics article. (Free registration required to read it in full, if you are quick)

Posted by Kiteman 8 years ago


butterfly knife

This is for people who really want a butterfly knife but are not allowed one (j_scap) It is made from a flick and lick lolly. A blade is strapped(with sellotape or superglue) to where the lolly used to be.

Posted by bunduk 10 years ago


Electronic Butterfly

Dear all: Have anyone trying to make an electronic flapping butterfly with flapping pattern that resemble an actual butterfly? Can you shine some light on me if you've attempt it before? If not, do you have any suggestion? Phillip

Posted by Gardenerprune 10 years ago


How To MAke A Butterfly Knife?

How Would You Make A Butterfly Knife? Like How Would You Make The Blade, Get The Little Metal Parts That Let The Blade & The Handles Move, And What Would You Need? Any Links? Please? Thanks.

Posted by NeonLime 10 years ago


I need help explaining the shape of this nebula Answered

Http://www.esa.int/spaceinimages/Images/2014/10/Butterfly_death_throes This image is the "Butterfly Nebula". I'm having trouble understanding it's shape. According to the accompanying blurb, the shape indicates a "bipolar nebular, where fast-moving gas can escape more easily from the poles of the dying star than around its equator. This creates a lobed structure reminiscent of an hourglass, or, as in this case, a giant butterfly." But... why? Why can the gases escape more easily from the poles?  Why is it harder to escape at the equator? Surely, if it was blasting from the poles, we would see a more linear shape, long "beams" of material shooting out of each end?  This image looks to me as if material blasted away from the equator, but parallel to the poles, almost as if the two halves of the star's surface were peeled apart, like turning half an orange skin inside out. Anybody got a borderline high-school/university level explanation for the shape?

Asked by Kiteman 3 years ago


knex tru triger rbg 1 shot with butterfly kife holder

Hey i made this gun and its pretty sweet tell me if i should post but i cant seem to get my camera to show it fireing but its easy to use and put together it holds a knex butterfly knife in the front and a real butterfly kife in the handle so yeah its pretty sweet http://www.youtube.com/watch?v=H6hXdSR16JM

Posted by J_SCAP 10 years ago


large multi-butterfly projection to follow you

Can anyone create a projection of white digital butterflies that follow the ball you hold? so you could walk through and a ton of butterflies would just follow that ball you are carrying. project on several different silk screens so you're phsically walking through and feeling all these objects touch your face?

Asked by rebeccatesiapark 6 years ago


Fm transmiter coding help

I need a little help determining a code that is used to run a Fm transmitter program through a Fm module and the AVR Butterfly. Here is the original article of the transmitter but there is no code that went with it and I tried to look for the file online, but I was unable to find it. There is this code that's on AVR Freaks, however, I do not know if that is the code for the transmitter (and I do not know what the code is suppose to look like because I barely know programming). I have all the parts ready to build it, I just need to know the code to make it run. Any help would be appreciated.

Posted by KT Gadget 8 years ago


My knife won't sharpen Answered

Back when my dad was in the Navy, he got an Edgco Buttlerfly knife in Afganistan. He gave it to me a while back. I decided to sharpen it so I could actually use it. It's not getting sharp no matter how long I scrape it on the whetstone. I can't take it to someone to get it sharpened because they're illegal in my state.

Asked by General Eggs 7 years ago



UART programming for AVR Butterfly help

Hey everyone, I need help with programming the AVR Butterfly with an FM transmitter code that I found on the net. I have all the pieces soldered together (nothing exploded or smoked) and I am trying to upload a file, however, I cannot get it to connect to the BASIC Stamp adapter from serial-to-UART. What I have: Usb-To-Serial Basic Stamp Adapter AVR Butterfly (Butterfly is being programmed through the UART ports) I am using AVR Studio 4 to upload the code, but it will neither confirm that the serial cable is there nor after doing the holding-the-joystick process to tell the butterfly to go into programming mode for the program to see it. Am I doing something wrong? Or is there an easier program to upload the code? I also have Visual Studios '05 and the Basic Stamp program from the Parallax website. If its any good to say, I also have the USBTinyISP programmer that can connect to the ISP ports on the Butterfly. Any help would be appreciated!

Posted by KT Gadget 8 years ago


Butterfly knife-like pliers? Answered

Hi everyone, i got this idea while fishing, and couldn't open my pliers with one hand(i was holding a kinda big pike in the other one). what if you could just flip it open like a butterfly knife? but i dont know how i could loosen those rivets.... so that's why i need some help. Pictures: http://imgur.com/a/9JxPi

Asked by rallekralle 3 years ago


Illusionist Locket 196 Silver Inlayed Butterfly Magic Pendant?

How to build it ?????????link http://www.etsy.com/view_listing.php?listing_id=24173336me email mpkn@walla.com

Asked by moshepes 9 years ago


Laser Cutting Digitally Printed Images?

Is it possible to laser cut full color, digitally printed images from fabric? For example, a full color image of a butterfly? Say, if I printed a series of butterflies onto white fabric and then want to have each butterfly laser cut individually from the fabric, is that possible? Can the laser be set up to cut on the outline of the butterfly and leave the colors in tact? Or is my only option to do digital printing after laser cutting the basic shape? Finally, is there anyone willing to help with a prototype that would use the described technique?

Asked by sugarbugduds 8 years ago


Can i get a balison/butterfly knife in cuba ???? Answered

Imma going to cuba soon and i would like to know ASAP

Asked by goeon 9 years ago


Knex Butterfly Knife with Real Blade!

I just made this really cool knex Butterlfy knife using J-Scaps idea and modify it to use a real blade! so here it is! i will post soon!

Posted by TeacherOfTheWays 10 years ago


Walkalong Glider

What's a walkalong glider? Here's a video which shows the concept: A light weight glider which flies in the lift created by a paddle held by the pilot.Build your own walkalong glider (recommended starting design)Build your own walkalong glider from a dead butterflyBuild your own walkalong glider (in general)

Posted by walkalongaviation 11 years ago


Sci-Fi Critters - Insects combined with Watch Parts

Insect Lab combines real insect specimens with antique watch parts and other technological components to create these sci-fi critters.  Jason showed me these and I thought they were beautiful!  The beetles and butterflies are my favorite.

Posted by Carleyy 7 years ago


How can I make a remote control flying butterfly ornithopter which can pick up small objects? Answered

An ornithopter which uses -- flapping wings -- remote control -- able to fly for atleast 3 minutes -- Please includes materials and process. Thankyou

Asked by amuchaku 9 years ago


Wearable Mechanical Butterfly Wings

I have half an idea of how to make the wings on my daughter's fairy costume work. My ideas involve vairying degrees of a pulley system, springs or rubberbands, and kite string. Any ideas of how to connect the pieces -or alltogether better ideas- would be greatly appreciated.

Posted by mae060669 9 years ago



Does anyone know anything or have any sources about how to collect and preserve insects?

I would like to make a display of bugs in my area, and was wondering if anyone had any ideas/links as to how to trap/preserve/display insects? Thanks in advance!

Posted by musicalbee2003 10 years ago



PLEASE CAN WE MAKE

Can we have some ideas to make these I know we can.... http://www.amazon.com/RAZ-Lighted-Fireflies-Jar/dp/B004P91CV8   or... http://www.apartmenttherapy.com/la/lighting/firefly-lamps-018462        really popular now two different kinds... http://www.thinkgeek.com/homeoffice/lights/e7a6/  and they now have BUTTERFLYS also   http://www.mybutterflyinajar.com/ Would love to see this in the next article of instructables. THX

Posted by DELETED_lovmyck 7 years ago



The settle of Caton Knights

This site is about how to construct something that useful forexample toys. I don't know how to construct thing. but I can fold a butterfly and rat by using a pice of paper. It is easy to do. If you want toys for you and family take this http://catan-board.blogspot.com/ Good luck

Posted by Downloadman99 8 years ago


Why Pro members are better than regular members. Just hear me out on this one.

Gotcha. ;) Bwahaha they think that's what we're talking about anyway... Keep your shirt on, after a bit I'll ask someone to move it to show it's all in fun. :P Meantime enjoy the butterfly...

Posted by Lithium Rain 8 years ago


DIY YoYo

How come noone posted a DIY yoyo yet? I make them so I thought someone would've posted it by now. You can make cool mini plastics out of cheap crappy party favors from any party isle at the store, Butterfly and regular. I have to make an extra thin string for them but they sleep and fly nice. Anyone else ?

Posted by jimmyb0nz 9 years ago


GEN H-4 Mini Personal Helicopter

The GEN H-4 personal helicopter weighs 70 kg, carries 220 kg total, has 40 hp of 2-stroke power, counter-rotating props, and costs $35 K. Check out what it takes to put together:http://www.acecraftusa.com/photos/Assembly/assembly.htmlOr, get a flying motorcycle from Butterfly Gyroplane:

Posted by ewilhelm 10 years ago


I need help with a wheelchair costume. Answered

This is not for an instructable,or the Halloween contest. I posted here becouse I thought people would see it. I am cross posting in Answers. Our church does Trunk N Treat for Halloween and with my husband being the pastor, we have to participate. We had been planning all year to go as Discworld Igor and Igorina but the committee decided that they wanted church members to either have fun or bible related costumes. My first idea was my wheelchair and my upper body as a flower and my head and back as a butterfly with my husband as a butterfly catcher. He did not like that idea. He came up with wearing pajamas and carrying large teddy bears and over sized bottles. Do you have any ideas on how I can disguise my chair as a playpen or crib or something else? Most of ya'll seem to be so creative. I can bake and cook but I do not have much creativity. Thank you for at least listening to me. eetzel This is a picture of me in my chair.

Asked by eetzel 8 years ago


knex weights?

Hey everyone! I made a knex bailsong (butterfly knife) to pratice tricks for when I get a real one, But I would like to figure out what mass it is so I can compare it to a real one. i dont have a ounce scale around here or dont know anybody that has one is there a place online where i can find the weights because i cant find any thing online

Asked by knexsuperbuilderfreak 7 years ago


What are some good Australian Freshwater bass baits?

Hi, I love fishing for bass (freshwater Australian) and i have been using baits such as worms, grasshoppers, crickets (black), butterfly's , moths, cicadas, shrimp, yabbies, small fish, bread/dough and lures, But i was wondering if anyone else has any ideas of a good bait? I would love any ideas so thank you very much for your answers, From CrazyBassfisherwoman

Asked by CrazyBassFisherwoman 5 years ago


How to ask a girl out for the first time?

Ok so there's this girl at my church that I really like and want to ask out but every time I think about doing it I just can't find the guts to do it. I think about her all the time and every time I see her I get butterflies in my stomach. We're already good friends and we know alot about each other but I don't know if she likes me the way I like her. Any ideas?

Asked by Helives40 9 years ago


Discount Code just for Instructables members!

The awesome folks at Silhouette America have been donating prizes and tools for us like crazy.  Now they want to share the love with everyone! From June 21-28, 2012, you can get the CAMEO + Rhinestone Starter Kit for only $269.99 Promo Code: INSTRUCTABLES See? They set it up just for us!  We've had a blast with our CAMEO.  Check out some of the fun projects we've made here at HQ: Using a CAMEO The T-Shelf Put a Bird On It Butterfly Card What will you make?  Check out their blog for inspiration (I do almost every day. Those strawberries are too cute to exist!)

Posted by scoochmaroo 6 years ago


Presentation on a 'How-To' Subject.

How excited I was, when my Public Speaking teacher handed out a prompt for our next presentation: "You must present to the class, a toutorial on how to make or do something" I was ecstatic, I thought this would be cake, its in the bag! But, here I am, struggling to find something to do, I have access to some of the best projects ever, but I can't just narrow it down to one! It must be made/presented in 7-10 minutes, to 30 seniors in high school. Would you mind suggesting something I can make, and demonstrate to my Public Speaking class? My thoughts were: www.instructables.com/id/Rubber-band-Powered-Butterfly/ www.instructables.com/id/Pocket-Graffiti-Pen/ Any more ideas?

Posted by bumpus 8 years ago


valves manufacturer and exporter

Http://www.jochvalve.comZhongquan Group Valve Co., Ltd. mainly manufactures the valves with such standards as American ANSI/API, Japanese JIS, German DIN and Chinese GB. It’s main products including Gate Valve, Globe Valve, Check Valve, Ball Valve, Butterfly Valve, etc. The size ranges from DN15 to DN1050. The pressure ranges from Class 150 to Class 2500. And the main materials of the products are WCB, WCC, WC6, WC9, CF8, CF8M, CF3, CF3M, LCB, A105, etc. We can produce according to the clients’ special requirements. The products are widely applied to the field of petroleum, chemical, metallurgical, power, fuel gas, city pipeline networks and so on. Our products are exported to Southeast Asia, Europe, Unite States, Middle East and other countries. With high content of technology and reliable quality, our products enjoy a good reputation. Zhongquan Group Valve Co., Ltd. mainly manufactures the valves with such standards as American ANSI/API, Japanese JIS, German DIN and Chinese GB. It’s main products including Gate Valve, Globe Valve, Check Valve, Ball Valve, Butterfly Valve, etc. The size ranges from DN15 to DN1050. The pressure ranges from Class 150 to Class 2500. And the main materials of the products are WCB, WCC, WC6, WC9, CF8, CF8M, CF3, CF3M, LCB, A105, etc. We can produce according to the clients’ special requirements. The products are widely applied to the field of petroleum, chemical, metallurgical, power, fuel gas, city pipeline networks and so on. Our products are exported to Southeast Asia, Europe, Unite States, Middle East and other countries. With high content of technology and reliable quality, our products enjoy a good reputation.

Posted by jochvalve 11 years ago


Politics

This Is where you can Post your thoughts about today's Government whether you like the current government or you don't like the current government. Whether you are a republican or a democrat or any other Political Party. This post is particularly about the U.S. government but even if it is not you can post it here! I will regularly post my thoughts about the government.

Posted by garrett10 9 years ago


For Sale: Bioshock Splicer Masks

Hey there! So I've made some masks recently and I'm thinking about selling some more. So here's how it goes: You choose from a variety of styles. These include Rabbit, Bird, Spider, Cat, and Butterfly. Some pictures and examples can be seen below.  All of these come in either Clean, Bloody, Dirty (as seen in the bird mask picture), or, in the case of the Rabbit mask, Sander Cohen Black. After you choose this, you can go to my Etsy account and place an order (http://www.etsy.com/people/inept77).  I will then make your mask and send it to you as quick as I can. Because these take a bit, I can only do 10 orders at a time. They will run about $50 each. If you have any more questions, go ahead and post below or message me.  Thanks!

Posted by inept 8 years ago


HOW TO ASK A GIRL OUT (FIRST TIME EVER)?

(FIRST TIME EVER)? OK we met at the start of term 2 last year at this little school we went there for term 2 we came friends and i no a little about her she is a year older then me i see her 4 for about 30 Min's in the morning on aw own when we met at the same station we hop on the same train we both get off at the same station then we get off and then she goes to her school and i go to mine i cant stop thinking of her no matter wats happening every tim i see her i get butterflies i have never told a girl that i have like them or ever asked some1 out in my hole life and im 14 and i have never been out with any one or kissed any 1 wat a boring life i have

Asked by darcy cammo 9 years ago


Atmega32u4 USB support?

I have made a breakout board for a 32u4. I have boot loaded to it using a uno as ISP and a modified Leonardo boards.txt file (I am using a 8MHz ceramic oscillator). The boot loading works and I can upload sketchs to it using the ISP. Here is the datesheet of atmega32u4 If I try to upload to the chip through a micro USB, I have to reset the chip manually and then I get the following output.      Programmer Type : butterfly      Description     : Atmel AppNote AVR109 Boot Loader Connecting to programmer: .avrdude: butterfly_recv(): programmer is not   responding avrdude: butterfly_recv(): programmer is not responding avrdude: butterfly_recv(): programmer is not responding avrdude: butterfly_recv(): programmer is not responding avrdude: butterfly_recv(): programmer is not responding avrdude: butterfly_recv(): programmer is not responding Found programmer: Id = ""; type = Software Version = �.p; Hardware Version = . I have tried changing the USB cable. Has anyone else had any similar problems? Also why do I manually have to reset the chip. I would of thought the chip does this with no DTR output from an FTDI. Thanks for any help

Asked by DELETED_MakiY2 1 year ago


how to tell and ask a friend out (first time ever)

OK we met at the start of term 2 last year at this little school we went there for term 2 we came friends and i no a little about her she is a year older then me i see her 4 for about 30 Min's in the morning on aw own when we met at the same station we hop on the same train we both get off at the same station then we get off and then she goes to her school and i go to mine i cant stop thinking of her no matter wats happening every tim i see her i get butterflies i have never told a girl that i have like them or ever asked some1 out in my hole life and im 14 and i have never been out with any one or kissed any 1 wat a boring life i have ( I NO I HAVE TO GET TO NO HER BETTER BUT WAT I REALLY ASKING IS HOW TO TELL HER WAT TO SAY AND DO AND WHEN TO DO IT ) PLZ HELP?

Asked by darcy cammo 9 years ago


Quick Release Piston Blowback?

I have put a great deal of money into constructing a 6" air launcher, but to my dismay things didn't quite go as planned with the valve design.  I have attached a picture below of the valve's design.  The idea is that when the air is released from behind the piston, the piston should move back allowing air to exit through the 5" pipe.  The valve successfully holds pressure, but fails to fly back and I believe this is a result of the piston and barrel it is up against being equal in size.  I wouldn't have designed this in this way, but the large schedule 80 pvc tee only allows 1/4 inch around the sides of the piston at best.  I am curious if anyone has any ideas to make this piston valve work, I really don't want to pay 200 dollars to get a butterfly valve on it and would greatly appreciate any ideas that may make this work.  I promise videos of the beast once I get it up and running.  Launching 6" objects using up to 80psi will be a blast, literally if I ever get crazy enough to bring it up that high.  

Asked by jj.inc 4 years ago


a few animatronic ideas could anyone help?

Hi all i want to build some small models and animate them. What id like to do is make some really small butterflys sitting on flowers rocks etc but want to make them flap there wings is therte any way i can do this??? also I want to add some small motors to some small windmill and watermill models to make them slowly turn. basicly Im a smurf collector who collects smurfs but also have a passion to create a whole smurfland in the loft rather than a train set lol. But I want to add some sort of anamatronics etc to make parts of it move and bring it all to life a bit more. So lights going on and off bugs flapping there wings etc mabe little boats moving around on the river? some of the characters moving some how? Basicly is there anyone who has any idea on how I can do any of it?? If you can help or point me in the right direction id be very greatfull. here are a couple of pics of a couple of my self made mini smurf houses that are only about 7 inches in hight. :-) Kind regards Steve ;-)

Posted by smurrell 6 years ago


(newsletter) Stay Warm, Dye Your Hair, Water Bottle Bazooka...

Jan 22, 2009 Sign-up for this newsletter: function openSubscribePopUp(src){ var emailValidate = /\w{1,}[@][\w\-]{1,}([.]([\w\-]{1,})){1,3}$/ if(emailValidate.test(src.value) == false){ alert("Please enter correct email"); return; } window.open("/newsletter/newslettersignup?email=" + src.value,"newslettersignup1","status=yes,scrollbars=yes,resizable=yes,width=420,height=250"); } Welcome back! It's cold up here in the northern areas and we want you to show us some great ways to fight the chill in the Stay Warm Contest. Win a sleeping bag!Reuse and recycle! Show off a clever and useful modification for a plastic bottle in the Tap'dNY Keep the Bottle Contest and win a Voltaic solar-charging backpack!The Craftsman Workshop of the Future Contest Round 3 finalists are up! See the 15 entries that have been sent on to Craftsman for final judging! Bottle Butterflies! by shortone Make Signs out of Cardboard! by Creativeman The Bytelight by Kipkay The Lazy Man's Pancake by mightysinetheta View the final 15! Win a Voltaic solar-charging backpack! Dominoes Table by crowdsourced Dye Your Hair a Strange Color by ladyada Make Your Own Bread by pmetro Water Bottle Bazooka by jeff-o Survey: HelpInstructables Survive this Economy! Stay Warm with the Heiny Heater! by jambhack Safety Alarm Clock by dylan2106 Upside Down Hanging Planters by DebH57 Sleep Warm Anywhere by Mother Natures Son Share your best way to fight the cold and win a sleeping bag! Make a new wallet in any colorduct tape you can find Easy DIY Home Automation by Stuart.Mcfarlan Easy Forced-Perspective Wall Art by jjijj Solar Pumped Hydroponic System by Tool Using Animal Copper Fire Log Heater by nepheron Now go make something awesome, and I'll see you next week! - Eric Sign-up for this newsletter: function openSubscribePopUp(src){ var emailValidate = /\w{1,}[@][\w\-]{1,}([.]([\w\-]{1,})){1,3}$/ if(emailValidate.test(src.value) == false){ alert("Please enter correct email"); return; } window.open("/newsletter/newslettersignup?email=" + src.value,"newslettersignup2","status=yes,scrollbars=yes,resizable=yes,width=420,height=250"); }

Posted by fungus amungus 9 years ago


Would 4 part mold solve this challenge? Answered

Great lesson and learned a lot from your class. This is my reason for taking the class, I have a need to mass reproduce this in refractory material from made from plaster. Your input would be appreciated. My thoughts are these:1- two part silicone mold for outer shape , split top to bottom, front to back. Frame made of millimine covered board. 2-additional two center parts from silicone for the upper (or of hard polymorph material) and lower portion - divided at the center of the center circle. If using polymorph, I would make a key at the union to orient the lower silicone piece to alignment them and perhaps a key in the bottom board to orient the bottom silicone piece. Stabilization of these two independent pieces could be achieved by a bolt through their centers and bottom of wood mold form and firmly tightened to place and retained by a butterfly bolt and washer. 3- refractory pour being made from the top. My positive needs to be finished a little better before I'm ready and I am also wondering what type of sealer or surface application should be used if a glossy finish to the mold surface is desired? I tried a watered down wood glue solution (PVA) but it doesn't seem to dry well enough and peels easily. I would also like to retrieve the piece in as good a condition as possible for later changes and improvements. Thanks for your advice and that of others with helpful input.Thanks 4 of 4 thumbs up!PS. There are two other interlocking parts not shown which complete the casting. I believe I can accomplish those molds easily enough and plan on casting all 3 parts from the same mix of refractory so shrinkage/expansion are the same for all parts.PPS. Also I would like to know, if you know, of an online service which will recreate my logo from 3D printing such as you had done for the doughnut two part mold lesson.

Asked by StanleyYelnance 1 year ago


Toy-Story 3 lots-o huggin bear conspiracy.

So i finally watched Toy Story3.(which happens to be epic) But I happend to relate lots-o huggin bear to adolf hitler....Why?you might be wondering. Well here's my list of thing that support my thesis. Also this is sorta crazy..maybe im just over thinking this but it does all make sense. 1-The biggest indicator is the line "Things were fine until lots-o came along. and he made a pyramid and put him self at the top of it!" which is what hitler did in the 1930's by making germany a dictatorship. 2-Another thing i noticed is how:Big baby,the rock moster,and the bug. Were alot like the SS by doing lots-o's bidding no matter what. 3-SPOILER-Near the end of the movie when they get past the trash grinding thing. And lots-o was gonna hit the stop button. He didn't and the toys he didn't like(woody,buzz,etc.) were going to end up in the trash incinerator. Which made me think of the mass burnings of jew's during the holocaust just because hitler didn't like them. 4-I also related to quote by pricklepants(the clown)"Sunnyside is a place of ruin and despair, ruled by an evil bear who smells of strawberries!" To how the concentration are usually described in history books/storys. Also i related how the evil toys(hitler,SS)lived well in the butterfly room.versus how poor the good toys(jew's) were treated awfully in the catepillar room. And how they showed the kids doing all sorts of crazy things to buzz and the gang. Well thats all i have now but i plan on writing some stuff down the next time i watch it. So expect more...also i know this is a very far out there conspiracy but if you've seen the movie then perhaps you'll agree.

Posted by tubanator-2.0 7 years ago


Clean Your Sinuses, Homemade Lathe, Disco Coaster...

Sign-up for our newsletter here. Sept. 27, 2007 Welcome back!October is right around the corner so get started for our DIY Halloween 2007 Contest! If you want some inspiration for what you want to make for the best holiday of the year, check out these cool projects. How to Clean Your Sinuses You can clean your sinuses really effectively just using warm water, salt, and something called a Neti Pot. posted by noahw on Sep 25, 2007 IKEA Power Charging Box with individual switches Charge up select devices without wasting power on other chargers.posted by PROD on Sep 24, 2007 Trekking Pole Tripod Get steady shots in the outback without lugging any extra gear. posted by jeffkobi on Sep 24, 2007 This week's newsletter is sponsored byToyota 100% Homemade Lathe Put together your own lathe for around $100. posted by catwood on Sep 21, 2007 Disco Drinks Coaster Bring the feeling of Las Vegas into your living room with a colorful array of 100 LEDs.posted by ebenupton on Sep 22, 2007 PLAY AND RECHARGE IPOD USING OLD BOOMBOX - Hints and tips A guide to help you through some of the common problems with boombox modding.posted by unknownuser2007 on Sep 21, 2007 How to Install Standard-and-Bracket Book Shelves Why use PVC pipe for plumbing when you can glue it together to form a sniper rifle with a scope that can shoot at over 300 fps?posted by ewilhelm on Sep 22, 2007 Puri - similar to chapati but fried Normally prepared on festival days, delicate and delectable puris means pure pleasure guaranteed.posted by avinash on Sep 21, 2007 Wearable Disco Ball Visor Become a moving lightshow with this generous use of flexible mirror. posted by BIGDaddy504 on Sep 25, 2007 Rope into backpack Commonly known as the "butterfly coil," this is a very handy and quick way to carry any long rope. posted by sam noyoun on Sep 25, 2007 See who won! Halloween Contest 2007! Get a free shirt! Now go build something awesome, and I'll see you next week! -Eric

Posted by lebowski 10 years ago