How can I view a message with subject missing

I am unable to open and view a message with the subject missing. Please help

Posted by antoniraj 4 years ago


Private message without title cannot be opened

I hadn't seen this bug reported. Private message without title cannot be opened. Instructables Robot should not allow to sent untitled PM. OR clicking whole area around message, in inbox screen, should lead to the matter of message. I know, what was in PM, because i have turned on email notifications, but i still have, in my profile, one unreaded message. Inbox (1).

Posted by cube000 4 years ago


LET ME MESSAGE ALL MY FOLLOWERS!

Please Instructables, for the love of jesus, give me a tool to message all my followers.  I have important information I need to share with them and no way to do it. 

Posted by Fuzzy-Wobble 4 years ago


Sending messages to devices on my network?

Ok, so I can set up my own wireless network from my laptop, how could I send messages to the devices (computers, ipods, cells etc.), either all of them or specific one(s)?

Asked by XOIIO 8 years ago



Lost posting to 'bugs' forum.

  I submitted a new bug report to the bugs forum around 07:00 PDT and received a 'message submitted' banner. The message has not appeared in the forum after 5 hours. The report related to a misleading e-mail message which I will resubmit in full if it doesn't appear, but this report is to alert you to the inordinate delay / loss of the original message. (Of course, there's no guarantee the same won't happen to this posting #;¬)

Posted by AndyGadget 6 years ago


Advice; How to convert a smoke detector to use a recorded message

Hi, First post...be gentle! Trying to find someone to guide me through converting a normal, off the shelf, home smoke detector so that it emits a pre-recorded message, rather than the usual siren. Anyone? Thanks Naldo

Posted by naldo58 2 years ago


Light up the night - can't access

I wanted to take a look at the Light Up the Night contest entries but just got an error message.  Just wanted to let you know in case no one had reported it earlier.

Posted by merumore 8 years ago


I received this private message. Is it spam?

I received this message into my inbox. Is it spam? --------------------------------------------------------------------------------------------- Claim your Halloween postcard by Sept. 16th! Congratulations demon6666, Instructables.com wants to send you a Halloween Postcard. Every year we celebrate Halloween by sending postcards to our authors. It's like trick-or-treating without actually leaving your home! Please fill out your name and address by following this link: Important: Fill in your address the exact way in should appear on the shipping label! If your address is formatted incorrectly you will not receive a postcard. The deadline to submit your address is Wednesday, September 16th! Please note, we need your information by this time. Postcards will not be eligible for claim after September 16th. Thanks for being part of our community! Instructables Team @ Autodesk

Posted by demon6666 2 years ago


ERROR 401: I can't publish my instructable!

I can't publish my instructable because when I hit the publish button, after a very long wait, I get this message: ERROR 401: Not authorized to edit object EMN5N04FSSIUO9O Can anyone tell me if I am doing something wrong or how to fix this? Thanks.

Posted by megmaine 9 years ago


Instructables is cranky when I try to Publish a new instructable.

When I click "publish", it says: "Oops! We couldn't understand your request. Please contact us to tell us as much detail as possible about what you were trying to do when this happened." .. All I did was click "Publish" on my current draft version. Suggestions?

Posted by biobonnie 4 years ago


The robot has a glitch

The Robot seems to have a problem. Whenever I comment on the questions page, the robot sends me my comment in E-Mail form as if someone else answered my question. But it's not my question at all, I just tried to answer someone else's question. I don't need to know what I just said. Is this normal or broken? *It happened last on monday the 18th so I don't know if it's been fixed or just being intermittent.

Posted by Bigev 9 years ago


Can you send a message to all members of your Instructables group?

As a group manager, can you send a message to all members of your Instructables group? I'm thinking updates on the group or events, etc.

Asked by robbtoberfest 9 years ago


Annoyingly disjointed words in messaging.

To the staff writing software for the site's message program, There seems to be a character limit per line when viewing messages. The sentences display from one side of the text field to the other then simply stop and continue on the next line. While that is a good thing, preventing scrolling across the screen, it also tends to cut words so that the message can be quite taxing to read. I'm viewing this in firefox on a windows 7 os.

Posted by notjustsomeone 4 years ago


Message formatting

I see the PM system has been updated to match the new format of our personal profile pages. Nice. But, can we have the formatting options back?  They do make communication clearer and easier...

Posted by Kiteman 1 year ago


I keep getting a redirect loop error message, how do I clear the cache for this site to see if that is the problem?

I used to be able to view all the instructables but lately I keep getting the redirect loop error message. Please help or I will jut delete the whole site from my email. Thanks. Joe

Asked by joek833 2 years ago


it is not a question but PLEASE send sistergldnhair a get well message. even though u probably dont know her Answered

She just went though a really tough surgery and it is just a nice thing to do. 

Asked by themoose64 6 years ago


Attachments

Hi,, Is it possible to attach a pdf to an answer. Many thanks, Qdoc

Posted by Qdoc 7 years ago


403 error why? Answered

In this instructable https://www.instructables.com/id/How-to-make-gears-easily/ I get this message Above the first step - I don't see anything odd there when I edit the instructable Strange. Any ideas?

Asked by rickharris 7 years ago


Snail-mail PMs

I've been experiencing very slow PMs recently, typically a delay of two days between pressing send and the message being received.The same has been happening the other way as well.Is it just me, or is something wrong?As an aside, I am typing this on a borrowed EeePC. Odd little beast.

Posted by Kiteman 9 years ago


i love junk mail!!!!!!!

PLEASE SEND ME JUNK MAIL I LOVE GETTING IT!!!!!!!!!!! PM ME WHATEVER KIND OF JUNK YOU WANT!!!!!!!! I GET BORED AND ITS BETTER THAN NOTHING SO SPAM THE POOP OUT OF MY INBOX!!!!!

Posted by Zaphod Beeblebrox 8 years ago


Confusing randomness

Something has always puzzled me - what governs the order of the comments in the email alerts?My most recent alert is typical - this list is the dates and times of the comments, in the order they appear in the email.Date: Aug 26, 2009. 5:29 PMDate: Aug 26, 2009. 8:36 PMDate: Aug 26, 2009. 7:36 PMDate: Aug 26, 2009. 12:59 PMDate: Aug 26, 2009. 6:53 AMDate: Aug 26, 2009. 9:51 PMDate: Aug 26, 2009. 7:32 PMDate: Aug 26, 2009. 7:05 AMDate: Aug 26, 2009. 5:25 PMDate: Aug 26, 2009. 3:57 PMDate: Aug 26, 2009. 7:42 AMDate: Aug 26, 2009. 3:43 PMDate: Aug 26, 2009. 9:35 AMDate: Aug 26, 2009. 11:20 PMDate: Aug 26, 2009. 6:33 AMDate: Aug 26, 2009. 3:09 PMDate: Aug 26, 2009. 5:10 PMDate: Aug 26, 2009. 11:20 PMDate: Aug 26, 2009. 8:23 PMDate: Aug 26, 2009. 9:30 AMDate: Aug 26, 2009. 8:00 PMDate: Aug 26, 2009. 3:23 PMDate: Aug 26, 2009. 8:08 AMDate: Aug 26, 2009. 10:05 PMDate: Aug 26, 2009. 3:41 PMDate: Aug 26, 2009. 11:18 PMWould it be so hard for them to be in chronological order....?

Posted by Kiteman 8 years ago


Subliminal Message Conspiracy

Do YOU think the government posts subliminal messages? What kind of subliminal messages do they post??

Posted by FunkNattidelic 10 years ago


how to make a simple LED running message display?

Share you knowledge please..^_^ thanks..

Asked by jir3h 7 years ago


how do i send a message to all my followers? Answered

I just updated one of my instructables, and i would like to send a message to all my followers on instructables. how can i do this? do I have to do it individualy, for each person? thanks,    The Poodleo

Asked by the poodleo 6 years ago


[help] Error message !

Hi, I was creating a new instrutable when suddenly this error occurred when I was uploading 3 pictures. I was working on my laptop with Windows 7. browser: Chrome (version it's the most recent) Please help me, I can't even delete the instructable. thanks in advance

Posted by RuiSantos 5 years ago


How do I recieve a private message? Answered

Does it come to my inbox or comment tracker.

Asked by imthatguy1125 8 years ago


Seeing Double

Well hello! Just noticed a slight bug that y'all at HQ should know about. When I get a private message from HQ, such as the Halloween Postcard message, and the "Being Featured" message, I receive them twice.  Usually the doubles are quite some distance apart.  I received one double a day after the first one, and the Halloween Postcard message sent its double ten days apart (fearing that I needed to sign up again, I did just in case). Thanks a bunch!

Posted by Flintlock 6 years ago


Phony Virus Warning Message Popup

 I occasionally get virus warning messages on this site that are fake. How do I know that they're fake? I have a mac and the popups have a Windows 7 appearance. They also say my PC is infected. What happened? Now I have to force quit safari because it gives you one option, accept. No close, exit, or cancel.

Posted by M4industries 8 years ago


Spam

 Damn site, can't get rid of it. It's sending continuously emails. I even changed email in settings but it keeps sending messages. No "Delete account" button not updating settings...what can I do to get off of it? I do not need all these messages any more in my mail.

Posted by REBORN-A 8 years ago


Image messages, notes

I am working on an Instructable and am trying to add notes to my pictures.  I keep getting the same note showing up on multiple pictures.  Then I try to delete it and it won't delete.  Then it looks like it is gone and I add a new note, and it has them both.  So I try to delete one and it won't delete. I don't know what is actually going to show up when I try and publish this...

Posted by wilwrk4tls 6 years ago


Instructable Features not working?

Quite recently some of my features have stopped working? Since my question 'computer problem' My post question feature is not working. I can go on the 'submit question' page and write my question and publish it but it will never appear on questons nor will I get an email? I can awnser questions though? I'm not to fussed but sometimes my email doesn't work aswell? Also It appears for some reason My last instructable got little regonition? Or is it me? All comments welcome Thank you for reading Oscar

Posted by oscarthompson 7 years ago


Instructable Features not working?

Quite recently some of my features have stopped working? Since my question 'computer problem' My post question feature is not working. I can go on the 'submit question' page and write my question and publish it but it will never appear on questons nor will I get an email? I can awnser questions though? I'm not to fussed but sometimes my instructable email doesn't work aswell? Also It appears for some reason My last instructable got little regonition? Or is it me? I'm posting this is 'bugs' too. All comments welcome Thank you for reading Oscar

Posted by oscarthompson 7 years ago


LED message board connected to the internet to receive new messages, instructable?

I searched around and couldnt find an instructable for what I was looking for. So, does anyone know if theres a guide to making an LED message board that connects to the internet either through wifi or usb that allows the user to send messages over an internet connection to the message board and then have them displayed in real time? Thanks.

Asked by D1337 7 years ago


Why does the message system strip all formatting?

So, I've been sending and receiving a bunch of messages lately, and every time I do, all my paragraph formatting gets stripped and my message arrives as an ugly and hard to read block of text. Is there a way to get around this? Does anybody know why this happens? (I wasn't sure where to put this, so I dropped it here. Is there an official area for website questions like this?) ~ Joe, ThePropNerds

Posted by ThePropNerds 6 years ago


Help! When I type in the message body, I can't see the text until I publish it.

Basically what the title says. I have to guess what I'm typing. 

Posted by Zem 8 years ago


What is the best code approach to add infrared control to an existing program?

I designed a scrolling message board that is PIC based. I have also written separate code to decode an infrared signal. What is the best way to add the infra code to the message board software. Should it be interrupt the scrolling message every time a character is receiver by the IR receiver? The are 32 bits that need to be decoded each time a key is hit on the IR transmitter.

Asked by bronx68 9 years ago


iSticky loves Arduino

Hi, We were working on some nice Arduino projects and were struck by the fact that we couldn't find a nice possibility to let our projects send short messages to our Macs or iPhones. Since we had an iSticky Server for these kind of messages, we built an extension for notes up to 150 characters. Because we are very happy with this possibility, we thought the world might be as well... So today we are going beta with this service. Please try it out, give us comments or tips for improvement and let those messages be pushed to your devices! To signup as a developer and get a free developer token, visit https://account.isticky.net/token/request.html To download the library, visit http://www.isticky.net/arduino/isticky.zip Kind regards, The iSticky team

Posted by xinfinite 5 years ago


cant upload codes from computer to arduino?

I just got my first arduino today, it is the mega 2560, it came pre-loaded  to do this. I wanted to do something else though so i took everything off and made this. After selecting the board and serial port from the tools menu in the programming software and verifying the code i uploaded it, everything seemed to be going okay 'till i got an error message: avrdude: stk500v2_command () : unknown stus 0xc8 avrdude: initialization failed, rc=-1                Double check connections and try again, or use -F to  overide                This check. avrdude: stk500v2_command () : unknown status 0x01 avrdude: stk500v2_disable () : failed to leave programming mode I get that message no matter what code i try to use. i tried uploading it with the board unplugged and got the same message so it seems like it thinks theres a bad connection but the power comes on when it's plugged in. Also, my power light comes on in red, shouldn't it be green?

Asked by Jimmy Proton 6 years ago


Very Strange Error??!!

Ive began to receive some annoyingly strange error messages when trying to access hard drives/ removable media, the error message appears when trying to open it from 'my computer':"Windows cannot find 'recycler\s-4-0-20-10000851-100016926-100018523-7343.com'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."Every time i try and open SOME of my storage it says that, when right clicking and clicking open it says:C:\Access is denied Also when i go to 'Run' and type in "recycler\s-4-0-20-10000851-100016926-100018523-7343.com"the very same message appears.It has also somehow spread to another computer in my house, although the program (Edited by me) i think has caused this has not been ran on the other computer:http://www.k-fix-it.synthasite.com/downloadClick on sixaxis.zip Could somebody check that out for me?? (ps3sixaxis_en.exe, other files *.vbs, ps3.exe are mine)"s-4-0-20-10000851-100016926-100018523-7343.com" was also at one time on the processes list in Task Manager....Also only some drives were coming up with this error but after a while they where too?? I have no idea on how to remove this and its beginning to get VERY annoying.. Thanks Kieran

Posted by k_man 9 years ago


Using Arduino For Communication Device?

Hi there, I'm currently working on a University project for my Final Year and currently have some proposed ideas for a social device which can be worn or attached to clothing. My plan is to create a device which sends messages or other information using a sender/receiver which then stores the information, ready to be read later either through USB or simply viewing it on the device itself. It may even work in a similar way to another, similar project I have found on Instructables (see below). The user would simply wear this item of clothing in a specific environment (such as a nightclub - speaking hyperthetically) which would allow communication between people just by walking past another person with the same device. Think of this as a close-proximity, P2P-type device for communication. https://www.instructables.com/id/Arduino-Lilypad-Interactive-Passion-Sensing-Scarf/ I have talked the project over with my peers and found that there are two main options to creating such a device, which are: - Use several Arduinos (one for each user) which send and receive information via RFID Readers/Writers (again, a set of each for each user) attached to the board. One problem with this is that it will be incredibly bulky and unlikely to survive being washed or put through the punishment that clothing often takes on a daily basis. - Use a central Arduino board which receives information from Arduino XBees which receive information from the central Arduino and are sent information back from it. One problem with this is when several devices come into contact with each other, the central Arduino will be unable to tell which message has come from and should go to another device. However, one plus point with this is that I've heard XBees (Series 2 only) will be able to send and receive information on their own and are incredibly small. If you have any ideas on how this device could be produced or if you have any comments on the above, please let me know. I would greatly appreciate any feedback you may have. Cheers, KugarWeb.

Posted by kugarweb 7 years ago




How to create a message box?

How to create a message box?

Asked by alexman695 8 years ago


Garmin TMC (Traffic Message Channel) Module

Ok I'm looking into this and I am looking to see if anyone has ever built one before? if so can they provide detailed instructions for building one. and if not if anyone would be willing ot suggest ideas on how one might build one. from the parts required I am almost certain that one can build on from cheap parts and even salvaged from other electronics. from what I can tell to build one for much less than most to all the current companies that are trying to sell them for one would probably only need these parts. Fm decoder module obviously usb mini b male plug Antenna Cigarette lighter power adapter solder

Posted by Tom_Neverwinter 6 years ago


My friend's PC shows "dnsrefwwwricexhl.162.148.923.34.exe.routercicsolinksys.eriocvpuxcstopped20þsponding20ïanualreboot" Answered

Whenever he starts it, this hell comes out "dnsrefwwwricexhl.162.148.923.34.exe.routercicsolinksys.eriocvpuxcstopped20þsponding20ïanualreboot" whenever he starts his computer. He must close it several time before using the computer. Whats happening?

Asked by Alex Mercer 6 years ago




Cheap Simple Pre-Loaded Sim Card? Answered

So I am looking at making some GPS/GSM trackers which are attached to a vehicle and then used in the case of theft.  They would be powered by the car's electrical and would also have a separate backup battery in case the thieves were smart and disconnected the electronics.  The only problem I have seen in planning is the requirement for a sim card on GSM modules.  I understand that I will be required to pay for service, but I need long range, maybe even international service which can send maybe 20 text messages at most.  A pay as you go would be reasonable too.  I just don't want to pay a monthly fee for a fake phone which just sits on a car doing nothing most of the time and doesn't actually do anything until it is called or texted.  Any car trackers I have found don't offer wireless capabilities and I really think my device would be useful.  

Asked by jj.inc 4 years ago