is there a program for the eye writer that controlls the axis ( x ) (y) fo electric motors?

Is there a program that controls motors for try pods etc, that the eye writer is compatable with.

Asked by dremone1284 8 years ago


HOMEMADE .NET PROGRAMS!!

Hello Instructables, I am currently making programs for people in VB.NET 2008 for $5 a program with an extra $5 for source code. If you would like a program email me at drmjj55@charter.net and I will email you further details. Yours in DIY, drmjj55 

Posted by drmjj55 7 years ago


How do I crate apps/programs?

Hi I don't know how to program at all. Can anyone help me with this?

Posted by Hippymike96 5 years ago


free computer programs written in C and Assembler

I have a number of free example programs including socket and web page programming. Help yourself by going to ftp://fets.user32.com and use   ian   as the username. There is no password required so leave it blank. I hope you find something useful. ian t.

Posted by turnbui 4 years ago


cad drawing programs

  I'm trying to find a good cad program that wont break your wallet to help with my projects. I have tried sketch  up and Its ok but   I need a book for sketch up for dummies ..... I can understand some of the stuff but the important things i need I just can't seem to figure out . Like Copying and paste , a few few others.  I used to have a program i used at my old job .It was a simple 3 view orthographic drawing software .

Posted by coolbeansbaby68 6 years ago


ANTI-LAG SWITCH?????

How do i make a program that disables anothers lagswitch  on steam???? can someone please write one for me???? thx so much!!!

Asked by zombeastly 6 years ago


Windows 8 won't let me open certain programs, help?

After a windows update all of a sudden certain programs won't open. Mainly photoshop, flash and Sai, which are all art programs. Yet all my other programs like Firefox, XSplit, Skype do work. I have tried to reinstall these and they still don't open completely. They act like there about to open (the banner comes up saying that it loads but then it closes out like I clicked cancel). When I open task manager it says that it's open and running even though it's actually not. I have scanned for viruses and found none and even restarted the computer multiple times. Sometimes it does work but a majority of the time it doesn't. The programs work fine on a windows 7 without fail, and before the windows 8 update they also worked perfectly. My other friends with similar computers (they also run windows 8) have no problem with the same programs and they run perfectly fine. Please help.    

Asked by JeanN1 3 years ago


Some of my computer programs aren't opening?

I try to open some of my computer programs and I get the same message every time. The message is "(Application name) has stopped working" and it's looking for a solution. Also it says something about Microsoft client (I think that's what it is) has stopped working also. It's been doing this for a few days now and I don't know why, Here is a list of all the programs that I noticed it with.  1. Itunes 2. Sims 3  3. Tony Hawk Pro Skater HD 4. Sony Vegas Pro 11.0 That's all I noticed but there could also be more, does anyone know why this is doing this? Could it be virus related? I just wanna know what it is and how I can fix it..  Thanks,  Also I can't uninstall Sims 3 and I was wondering could this have to do with it too? Maybe? I don't know that's why I'm asking.

Asked by vincentkolpak 4 years ago


Why is my computer (windows 7) not opening any programs? trying to fix damge caused by a virus i had

I got a virus recently, but with malwarebytes anti-malware as well as superantispyware, have removed the threat. but i think i still need to fix some of the damage done. every program i try to open (firefox, IE, skype, games, most files, even the shut down/restart) it will act like its loading for a few seconds, then nothing will happen. i am running windows 7. i have looked up some information for the past couple days, and think it might have to do with the registry/file associations, which i know almost nothing about. my computer is basically useless outside of safe mode, so i would much appreciate any help i can get!

Asked by travis.warren91 5 years ago


Programming compilers?

Hi guys! Well, I usually program using Microsoft's visual studio suite; however, I'm getting tired of my programs requiring the .net framework to run. Basically, I was wondering what compilers programmers use to write their programs. I really don't care what the language is, I have a fairly broad knowledge of programming languages, and I could always pick up another if need be. Anyway, could anyone point me out a few names of compilers? I would be very grateful. (Particularly if they were free) Thanks!

Asked by transistorguy 6 years ago


Help!

I cant open anything on my PC nothing works. I am only able to get into google chrome. A GUI pops up when I try to open a program asking me what program I want to use to open it. I tried downloading Malwarebytes but it wont open either. What do I do? Please help! My PC is a big part of how I make money. (ALL THE FILES ARE .EXE!!!!)

Posted by PlexyGaming 3 years ago


Start Menu Contents and Programs

What are the usual things on your start menu? What is under All Programs?

Posted by puffyfluff 9 years ago


HNS-Corp.tk

I have got my site up and running. What the site is for is for me making and selling programs, and soon to teach others how to script and program. The site is http://www.HNS-Corp.tk I currently have four programs for sell, well two programs and two anti-programs for those programs. If you want to know more just go visit the site.

Posted by Nemraiku 9 years ago


Anyone know of a program for designing simple mechanical systems (gears, levers, etc)? Answered

I'm trying to design a complicated wind-powered whirligig that has a lot of gears and levers in it; I would love to design it on a program that would allow me to test out variations before I get to actually building it. Has anyone seen a program that can do that? Much appreciated, Damian

Asked by damianzuch 6 years ago


Does anyone have simple programs they made on a ti-83/84 graphing calculator?

I have been making some and i want to see what other people have made and see how so i can farther my understanding

Asked by evilskaterpyro 9 years ago


I am looking for the easiest way to convert my iTouch into a phone Can anyone help me, or, direct me to a link? Thanks!

Hello All,  I am in need of some type of a conversion program, or(?) whatever will work, hopefully not to hard, in order to allow me to use my iTouch as a phone. I've been told that just buying headphones with a microphone, would do it but I don't see how? Has anyone out there found an App one can download, or any other type of program??  Appreciate any/all answers or suggestions,    C.Forman

Asked by mrforman 7 years ago


what can I use to document how I make my graphics on my computer? Answered

Hey, its blechmen here and well I am a graphic designer and I have wanted to share with the Instructables community for a while now on how to create certain things related to graphic design. But I don't really know how to do it easily by like taking a picture of each step? Is there a program I should look into for it?

Asked by Blechmen 5 years ago


How to learn C and C on a Mac? Answered

Is there any other compiler other than xCode because i lost my starting disk. or is there a way to download xcode?

Asked by mac_is_awesome 9 years ago


What are these programms and do I need them?

Hi, ive just bought a laptop to use for music playback and storage. I dont want it for anything else (not even internet), its a basic XP toshiba and I got it second hand. So i went to start uninstalling any non essential programms to give me as much space for storage as I can and to help it run quicker. However i can see several programms ive never heard of and wondered if anyone wold be kind enough to explain to me what they do and if I need them or I can uninstall them. Thanks REALTEK Gigabit and fast Ethernet NIC driver Blue tooth stack for Windows by toshiba Sonic DLA Texas Instruments Also what is Inervideo WinDVD creator 2, i have some Idea but dont want to unistall if it does something to the computer

Asked by Boba Jett 3 years ago


Moving Programs from one OS to another?

Hi! I dual boot XP and Ubuntu 10.10 on a laptop. XP runs really really slowly. I want to move some programs from the XP partition to the Ubuntu partition and run them with wine. However, when I try to do this, it runs, but I get an error telling me that I need to reinstall because there has been a problem. No more details than that. Has anyone done this before and can give me some advice? Also, yes I have marked them as executables and they are large programs... like Photoshop and Dreamweaver, so not just a simple exe to transfer. Thanks!

Asked by transistorguy 7 years ago


Here are some opinions of what one person considered the TEN most annoying programs gotten from the Internet...

Tech Republic lists what it considers the 10 most annoying programs from the internet.....do you take issue with any of them ? "...Here are just 10 of the guilty parties that try to do the impossible: to make us hate the Internet and wish it had never been invented — and which very nearly succeed. "HERE is the link to the blogOh and I forgot to mention the Top 5 worst downloads of the Spring of 2009 - blog...

Posted by Goodhart 8 years ago


What else is there?

What other prgrams are "pre loaded" on my computer such as batch and vbs.  That i can make my own files with?

Asked by Laserman595 8 years ago


How do i connect my created device into my program?

I am creating an ultrasonic device which i want to interface into my program, how is it possible? please help me anyone..

Asked by vpuato 5 years ago


Scripting Vs Programming? Answered

What is the difference between scripting and programming?

Asked by artworker 6 years ago


Programming?

Does anybody else on this website know how to program in SPIN? Haven't seen much Propeller programming on this website...

Asked by blinkyblinky 6 years ago


BS2 programming with Arduino?

Is it possible to program a Parallax BS2 using arduino?

Asked by MACKattacksnipe 7 years ago


programming ? Answered

Hello ! how to delete a program that is already existing in the arduino board to upload another program in arduino uno R3

Asked by PunithanS 1 year ago


What programs are needed to flash an Xbox 360?

What computer programs are needed to flash an Xbox 360? I have a Hitachi 47 HD and I've tried downloading Jungle Flasher and Ixtreme from their respective websites, but I can't seem to get them to run on my Laptop (Windows 7).

Asked by TR.Parson 6 years ago


replicators

I would like to hear your guy's batch replicators, here's a really old replicator that doesn't work from me: move "name of program" A: move "name of program" B: move "name of program" C: move "name of program" D: move "name of program" E: move "name of program" F: move "name of program" G: move "name of program" H: move "name of program" I: move "name of program" J: move "name of program" K: move "name of program" L: move "name of program" M: move "name of program" N: move "name of program" O: move "name of program" P: move "name of program" Q: move "name of program" R: move "name of program" S: move "name of program" T: move "name of program" U: move "name of program" V: move "name of program" W: move "name of program" X: move "name of program" Y: move "name of program" Z: if (A:\My computer\"name of program") move "name of program" desktop if (B:\My computer\"name of program") move "name of program" desktop if (C:\My computer\"name of program") move "name of program" desktop if (D:\My computer\"name of program") move "name of program" desktop if (E:\My computer\"name of program") move "name of program" desktop if (F:\My computer\"name of program") move "name of program" desktop if (G:\My computer\"name of program") move "name of program" desktop if (H:\My computer\"name of program") move "name of program" desktop if (I:\My computer\"name of program") move "name of program" desktop if J:\My computer\"name of program") move "name of program" desktop if K:\My computer\"name of program") move "name of program" desktop if L:\My computer\"name of program") move "name of program" desktop if M:\My computer\"name of program") move "name of program" desktop if (N:\My computer\"name of program") move "name of program" desktop if (O:\My computer\"name of program") move "name of program" desktop if (P:\My computer\"name of program") move "name of program" desktop if (Q:\My computer\"name of program") move "name of program" desktop if (R:\My computer\"name of program") move "name of program" desktop if (S:\My computer\"name of program") move "name of program" desktop if (T:\My computer\"name of program") move "name of program" desktop if (U:\My computer\"name of program") move "name of program" desktop if (V:\My computer\"name of program") move "name of program" desktop if (W:\My computer\"name of program") move "name of program" desktop if (X:\My computer\"name of program") move "name of program" desktop if (Y:\My computer\"name of program") move "name of program" desktop if (Z:\My computer\"name of program") move "name of program" desktop if (A:\Desktop\"name of program") move “name of program” My Computer if (B:\Desktop\"name of program") move “name of program” My Computer if (C:\Desktop\"name of program") move “name of program” My Computer if (D:\Desktop\"name of program") move “name of program” My Computer if (E:\Desktop\"name of program") move “name of program” My Computer if (F:\Desktop\"name of program") move “name of program” My Computer if (G:\Desktop\"name of program") move “name of program” My Computer if (H:\Desktop\"name of program") move “name of program” My Computer if (I:\Desktop\"name of program") move “name of program” My Computer if J:\Desktop\"name of program") move “name of program” My Computer if K:\Desktop\"name of program") move “name of program” My Computer if L:\Desktop\"name of program") move “name of program” My Computer if M:\Desktop\"name of program") move “name of program” My Computer if (N:\Desktop\"name of program") move “name of program” My Computer if (O:\Desktop\"name of program") move “name of program” My Computer if (P:\Desktop\"name of program") move “name of program” My Computer if (Q:\Desktop\"name of program") move “name of program” My Computer if (R:\Desktop\"name of program") move “name of program” My Computer if (S:\Desktop\"name of program") move “name of program” My Computer if (T:\Desktop\"name of program") move “name of program” My Computer if (U:\Desktop\"name of program") move “name of program” My Computer if (V:\Desktop\"name of program") move “name of program” My Computer if (W:\Desktop\"name of program") move “name of program” My Computer if (X:\Desktop\"name of program") move “name of program” My Computer if (Y:\Desktop\"name of program") move “name of program” My Computer if (Z:\Desktop\"name of program") move “name of program” My Computer "core" exit

Posted by thefirstgaruga 10 years ago


Programming?

I'm just looking for something good to program right now.  Any ideas?

Asked by KaydenST 5 years ago



Microcontroller programming

What are the sbi and cbi functions in microcontroller programming??????????????

Posted by sweetramy 10 years ago




What is a website or program that would make it easier to program the Arduino?

Im to lazy to learn programming languages and i was wondering if anybody knew and websites that used pictures and digrams to program the arduino?

Asked by connoboarder 6 years ago


how to start learning program? Answered

This is my first time to learn arduino program .so how to start learn arduino program

Asked by The bestm1 9 months ago


Writing programs in BASIC ? Answered

What do you save a text document as if you are writing a program in BASIC?

Asked by neeley 7 years ago


ghetto programming

How do i program a avr micro processer with perl? and where will i get guides on how to do this?

Posted by cris1133 10 years ago




'program stopped' never prints.? Answered

I need to use ctrl-C to stop the program. GPIO.cleanup() except KeyboardInterrupt: print ('program stopped')

Asked by MalcolmO5 1 year ago


share your computer programs, Batch, command, notepad, ect.

share some programs you made up, and give or get tips on them

Posted by draconis537 7 years ago


Batch Program ideas

Hey everyone! ive made only two batch programs, as you may or may not know. i need ideas, anything that you suggest, i can make!! (no moving games, cant do that) but anything else you want me to make, i can and WILL program it. its your chance to express yourselves, i need ideas!!      *dont give simple ideas, i like chalenges ;)

Posted by Country Boy 97 6 years ago


Slicer Programs? Answered

What slicer program would be good to use for a Mod-T 3D printer?

Asked by Jeremy Weidner 1 year ago



Programming eeprom

I have been trying to program an atmel 25040 eeprom with a superpro3000, it accepts the program,but when I click on the verfy option an error message appears. Can any one please help?

Posted by jimenazo 10 years ago


Android program menu

Hello, I am trying to program my electrify M to Pageplus. I have seen no flashing tool that supports the phone. Can I program my phone with program menu like this? https://plus.google.com/115059760247096945617/posts/hbWJ1f64434 P.S. my phone is unlocked.

Asked by jbaker22 3 years ago


ATtiny pin low during programing Answered

When an ATtiny2313 gets programmed using an Arduino as an ISP, if pins #4 and 15 are held low during programming will it effect the the program. Or will the program be loaded correctly and work correctly irregardless. Use the blink sketch for an example.

Asked by WWC 5 years ago


how to upload the program? Answered

The proper instruction are followed but troubleshooting occurs while uploading, program is not responding

Asked by selva kiruba 1 year ago