46Views6Replies

Author Options:

Any ideas what to do with network tubings? Answered

I got my hands on hundreds of meters of network tubings last year, thinking I could use it for SOMETHING (have ten times more than on the picture). But I don't get any ideas!!! :-( Should I melt it? Into what? Should I build a statue? How? Could I make art of the tubing? What kind? I'm completly dry, pleeeaaase help... Would appriciate if you would send pictures to your ideas! :-) Thanks!

7 Replies

user
JimNeilBerg (author)2017-12-30

PLEASE, GO ON Downunder35m!!!

Great answer, fuller than I ever imagined!!! :-) I asked to get them when my community installed ground based broadband last year, the company installing didn't use the entire reels. I'm not usually the beggar-kind-of-guy, but here I thought I could do fantastical things. NOT! Hehe :-) I have good imagination, normally, but not with stuff like theese it seems.

Hey, I found out exactly the type: The "tubings" are actually called "ducts", and the "brand name" is Microduct. There was a lable on one of the reels, thankfully :-) Here's some picture, and a Wikipedia-link.

Bending them, I suppose they are semi-flexible, as explained on the Wiki-page. No reference though of what material they are made of (considering melting or heating).

https://en.wikipedia.org/wiki/Microducts

Select as Best AnswerUndo Best Answer

user
Downunder35m (author)JimNeilBerg2017-12-31

HPDE can't really be glued with anything so you might have to revert to contact glue for artwork and similar.
A simple stapler might do the trick too ;)

Ever wanted you own wind tunnel or water tunnel for experiments involving turbulences and similar??
Cut the tubing into about 10-15cm long pieces and place into a frame of your desired size.
Looks then like a honeycomb with round holes.
This will cause air from a fan or water from a pump to be aligned and form a very straight and turbulence free stream.

Since the material is quite dense you could also try to use it for communication ;)
Like a stethoscope the sound sound will travel through the tube.
Use an in ear headphone speaker on one end an an elecret microphone on the other and you get wireless communication without the deadly risk of producing radio waves LOL
Oh, for two way communication you need to double the system but with speaker and microphone at the other ends.

Select as Best AnswerUndo Best Answer

user
Jack A Lopez (author)JimNeilBerg2017-12-31

I had heard rumor the internet was made of tubes,

https://duckduckgo.com/?q=internet+is+a+series+of+...

but I had never actually seen pictures of these tubes, until today.

Select as Best AnswerUndo Best Answer

user
JimNeilBerg (author)2017-12-30

The producers home page says the ducts are made from HDPE; High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylenethermoplastic made from petroleum

Select as Best AnswerUndo Best Answer

user
Downunder35m (author)JimNeilBerg2017-12-31

I suspected something like this based on the shiny image.
Definately not the standard stuff that keeps network cables (cat5,6) together.
More heavy duty for underground use.
But you can recycle it, in fact I like the stuff for machining new stuff that broke.
At home it can be tricky though without the right tools.
@ around 220°C it will start to melt or better go soft, a bit more temp and it becomes sticky and can be pressed together or extruded.
Problem is that the stuff is a good insulator as well and it does not like oxygen when when heated too much as it goes brittle.
Forgot what oil I used but I went to the supermarket and checked what temp frying oils will tolerate and grabbed the one with the highest temp LOL
Put in a pot with a smaller can inside and you are good to try.
Requires a good thermometer though and never leave it alone!!!
If the oil smokes before you can press the material in the can to a solid lump you need a different oil to prevent a flash burn!
Best option would be an extruder with a good temp controller, maybe as simple as an old meatgrinder with enough heating wire around it....

Select as Best AnswerUndo Best Answer

user
Toga_Dan (author)2017-12-31

make colorful planters for your tomato plants!

Select as Best AnswerUndo Best Answer