12516Views15Replies

Author Options:

Copy and paste in EAGLE Answered

When creating a schematic in eagle, in a step by step instructions how do you copy and paste multiple components and nets all at once?

15 Replies

user
Plasmana (author)2008-11-30

Does EAGLE have any free trials?

Select as Best AnswerUndo Best Answer

user
zachninme (author)Plasmana2008-11-30

Yes they do. They have a freeware version with a few limitations, but they aren't too bad. I use it and I haven't needed to go beyond them.

Select as Best AnswerUndo Best Answer

user
Plasmana (author)zachninme2008-12-01

Wow, that is good...

Can you post me the link to it? Please?

Select as Best AnswerUndo Best Answer

user
westfw (author)Plasmana2008-12-02

http://www.cadsoftusa.com

It's mentioned in many of the Eagle Instructables, you know...

Select as Best AnswerUndo Best Answer

user
Plasmana (author)westfw2008-12-03

Thank you! I got the program up and running, now I just need to learn how to use it...

Oops, I did not know that... Sorry...

Select as Best AnswerUndo Best Answer

user
zachninme (author)2008-11-29

Also note the difference between the CUT & COPY commands. COPY instantly creates a copy of the selected, whereas CUT puts it in the buffer to be PASTE'd later.

Select as Best AnswerUndo Best Answer

user
guyfrom7up (author)zachninme2008-11-30

haha, thanks, i figured this out about a year ago, but helpful to those who don't know!

Select as Best AnswerUndo Best Answer

user
zachninme (author)guyfrom7up2008-11-30

Dammit! I can't believe I did that! :P

mkeymont threw me off by bumping the thread... and I didn't notice the 2007!

Select as Best AnswerUndo Best Answer

user
Lithium Rain (author)zachninme2008-11-30

Hahaha-oh, NO! Here comes Bumpus! Duck and cover! >Pulls into a ditch< Best just to lay low for a bit. Bumpus doesn't take too kindly to bumpers...

Select as Best AnswerUndo Best Answer

user
bumpus (author)Lithium Rain2008-11-30

>The Bump, is not impressed

Select as Best AnswerUndo Best Answer

user
mkeymont (author)2008-11-29

Use the group tool to select, then click "Cut" then RIGHT CLICK on the group to copy it. Next simply paste it. The key is right clicking to select the group. Cheers!

Select as Best AnswerUndo Best Answer

user
westfw (author)2007-11-08

Use the "group" command to drag and select a region containing the components you want to copy. Then use the "cut" command (which is actually "copy"), followed by "paste" to drop copies of the group down as many times as you want. The "copy" command is really a "duplicate" command and only does one component at a time... (this departure from the usual definitions of copy, cut, and paste is one of the more common complaints against EAGLE...)

Select as Best AnswerUndo Best Answer

user
VIRON (author)2007-11-08

Boo Hoo! I have the same problem, and no one knows. (?) I want to make 100 little boards on one with eagle and I can't figure out how to paste the other 99 copies.

Select as Best AnswerUndo Best Answer

user
guyfrom7up (author)2007-11-06

help please. whenever I do it it only copies 1 item

Select as Best AnswerUndo Best Answer