88Views5Replies
Could someone please identify this board?
I was ransacking through my university's inventory, in a quest to find something to build a line follower robot. I did find something that gave me a positive gut feeling. However, I need to know for sure what exactly this board is and if it is suitable for a line follower robot that should trace a 1.5 inch black line on a white background.
Photo of the board attached.
Thanks.
It is a sacred cow health monitor uP board with three PWMotor drive outputs, several sun light detectors, a serial communication Tx/Rx port with direction LEDs, Internet cable port, an IR detector 16MHZ crystal Fq, an LM7805 VCC regulator, with reset and option mode buttons at https://www.facebook.com/SimpleLabs
You will have to understand the programing language see your PCB pic in facebook !
YES IT CAN BE A HEALTH LINE FOLLOWER !!!
Select as Best AnswerUndo Best Answer
Thanks man.
We use simple methane sensors for cattle health monitoring though. Gives a fair idea regarding its digestive as well as overall health.
Select as Best AnswerUndo Best Answer
Wow ! methane medical monitors gives a new meaning to the 3M co :-)
On us there is a situation that we must exhibit flatulence after certain procedures like colonoscopy to be allowed to leave the recovery room..
Select as Best AnswerUndo Best Answer
Well, flatulence and people wanting to leave the room has always been a classic combo. So, procedures or not, there's nothing new there.
Select as Best AnswerUndo Best Answer
Yes
Select as Best AnswerUndo Best Answer