129Views47Replies

Author Options:

DD-Kyt Mods Answered

Ok i want people to post pictures of their Moded DD-Kyts here. As most of you might know i realy want to build the perfect sidearm and believe that if we all work together we can do it! So far im working an a way to stop it from jamming (pain in the @$$!)

47 Replies

user
TheDunkis (author)2008-10-22

If we start the PSA I think it should be from scratch. I do like the angle you got using the type of handle. I might just use the D. Falcon's magazine again and see if I could attach it differently. I think that we have to make a good trigger behind the handle but under the bottom not over the top as I'm also planning on a slide. Yerjoking already has the trigger part thought out.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)TheDunkis2008-10-22

I actually had an idea for the trigger, but when I made it, it sacrificed a little holding room on the handle. The slide I can't figure out at the moment, and the removable mag isn't quite necessary.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-23

I could easily make a removeable mag for this.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-23

Only using knex parts and a handle only 3 connectors wide?

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-23

Using abit of paper and tape, or I could make a removeable that didn't need tape, but I'd have to give it the extended mag look (the extended part holds the ammo) that way you could still have it removeable ;)

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-23

K, I actually just thought of an idea for one where instead of inserting the mag into the bottom of the handle. you clip it into the side of the handle. That opens up a whole new range of potential possibilities in my little, complicated head.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-23

Or flip open the side, then put some rounds in, easier than clicking a mag in!

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-24

Yeah but the only problem is it might have to have a straight mag, I'm building the prototype now, I'll give pics when I'm done.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-24
user
yerjoking (author)Oompa-Loompa2008-10-24

Ok the mag worked, but it was abit bulky.
And used more pieces than neccessary, I took it apart, made Adamsdead's shotty and I just gave it shells =3

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-24

It shoots either a blue rod, 2 white rods or 4 greens, I need abit more modding before I stick with it a while though.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-24

Sure, I'm modding it abit more, btw, are you american? (Its just I know when you'll be on so I can give you a pic tomorrow)

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-25

Okay, I failed to give it a mag, but I'll take some pics now, it does have shells and shell ejection though.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-25
user
yerjoking (author)Oompa-Loompa2008-10-25

Pics are faster, but a vid could show you the power, spread, accuracy, and the realoading, and the shell ejection (I only have enough y clips for 1 shell lol) (also you have to touch one part of the shell, then pump the gun to eject it). I could get pics now or a vid later on.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-25

pics now please, then perhaps a video later as well?

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-26

Ok, I'll take some pics now, then when no one is in I'll make a vid, do you want me to shoot something or to shoot my chair?

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-26

I wanna see its piercing power too if you are making avideo.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-26

Okay, I'll shoot at paper, it doesn't eject shells anymore because I modded it so as I could make more than one shell (with the old one to make 1 shell you needed about 14 y clips) but its more powerful, it shoots 4 green rods, they don't pierce cardboard, but easily go through paper. If you want more power use 2 white rods or 1 blue rod =]

Select as Best AnswerUndo Best Answer

user
yerjoking (author)yerjoking2008-10-26

Also I might not be able to make a vid tonight =/

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-26

Sure, I'll take them now.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)yerjoking2008-10-26

what's that second picture?

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Oompa-Loompa2008-10-27

Shell holder, you just put part of it in your belt (it can hold about 14 shells, I only have 5 and its about 1/4 full).

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)yerjoking2008-10-24

...are you guys just taking the liberty of building the gun yourselves? You know I was kind of planning on building the gun myself... I already had the idea and wanted to be the one to make it. Sure I needed help but please don't tell me as soon as I asked for it people rather steal the idea.

Select as Best AnswerUndo Best Answer

user
Oompa-Loompa (author)TheDunkis2008-10-24

You are acting very strange lately. We in no way were trying to "steal" your idea, we were just discussing our own ideas. Just because you don't want our help, even if all the help anyone can get always, um, helps, doesn't mean we can't think on our own about it.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)TheDunkis2008-10-24

I never meant to steal it, but you asked me for help, I was just saying I'd build a prototype for the mag idea...

Select as Best AnswerUndo Best Answer

user
kingghaffari (author)TheDunkis2008-10-22

I actualy think that a removable magazine isnt worth it...... I moded your speed loader to fit the gun and it works perfectly! It also only jams about 1 out of 20 shots now! 1 more kink to fix....... THE TRIGGER! Im fine with a new design as long as its better with this one... anything you want me to work on?

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)kingghaffari2008-10-22

Well that'll be other peoples' option. It's easy enough to convert it from using a magazine to just using the ammo normally. Besides it's more for the fact that it would be a first. Anyways the whole point of the perfect side arm is just that to be the perfect side which means it should get a good amount of distance, should be fast to reload, and fast to cock when all other guns fail.

Select as Best AnswerUndo Best Answer

user
kingghaffari (author)TheDunkis2008-10-23
user
kingghaffari (author)TheDunkis2008-10-22

wait..... trigger BEHAIND the handle? i saw that convo and i didnt understand it....

Select as Best AnswerUndo Best Answer

user
yerjoking (author)Katarukito2008-10-27

DsmanDunkisKinghaffariYerjokingTrauts Iunno, King made it up.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)2008-10-23

I think I'm gonna try 2 things and make/remake 1, handle that opens up so you can load bullets directly from the side, and a slide. Then I'll see how much I can shrink my dual triggers (which should be pretty small, I can get them a white rod apart, that should give you a small power increase. BTW the only person which might understand this is Dunk, so dude, if you're online reply, I can't get on msn.

Select as Best AnswerUndo Best Answer

user
yerjoking (author)2008-10-23

I need to know what you want for the trigger, I can give it a true trigg behind the handle using my system, or I could re-make one to fit a block, lemme know btw (To TD).

Select as Best AnswerUndo Best Answer