128Views19Replies

Author Options:

Energy wheel Answered

This Idea is based on Magnetic Repulsion and Kinetic force.

According to diagram there will be a  Wheel and a magnet(1) will be attached with this wheel. There will be a balance system(seesaw system) and two magnets(2no.magnet and 3no. magnet) will be attached with this balance system .

when 1 magnet will repel 2 no.magnet then the 2 no.magnet will move upward and due to this movement the 3 no. magnet will come down and will work to repel 1 no. magnet and wheel will start to rotate.
when 1 no. magnet will again repel 2 no.magnet after a rotation then the 3 no. magnet will again work to repel the 1 no.magnet.

In this way the wheel will rotate again and again.The magnetic strength of 1 no. magnet will be high than 2 no. and magnetic strength of 3 no. magnet will be high than 1 no. magnet.
I want to develop this technology.

19 Replies

user
vikram_gupta11 (author)2016-08-09

its not my intention that people waste their time and money. if someone is not agree with this idea thenjust do some work to know the feasibility wheather it will work or not.if u go back in history then u will know that many inventions ideas were rejected by experts but develop successfully later .so if someone is interested in this idea then he may try to develop a model .im not forcing people to try this idea if someone is interested then he will try to develop a working model and if not then drop it .i just thought about this idea and drew a sketch to know the comments and reviews.i just request to those people who have interest in this kind of ideas .

Select as Best AnswerUndo Best Answer

user

"if u go back in history then u will know that many inventions ideas were rejected by experts but develop successfully later"

think of the few times ideas were rejected but became successful, now think of all of the times that the ideas were rejected and never became successful


Select as Best AnswerUndo Best Answer

user

He's using the Galileo Gambit, a form of the Association Fallacy.

When you spend enough time talking to the only-slightly-informed members of fringe interest groups, you tend to learn a bit about failures in logic.

https://en.wikipedia.org/wiki/List_of_fallacies

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)2016-08-09

There are many people who have interest in these kind of Ideas and I publish this Idea sothat if possible they could add some more features and develop this Idea upto next level where it could work.There is a need of some more work on this Idea and I'm confident that someone has started work on this Idea .

Select as Best AnswerUndo Best Answer

user
Kiteman (author)vikram_gupta112016-08-10

You are getting responses here from science educators, experienced makers and professional physicists - you will not try it for yourself, so you will have to believe us.

If you still do not believe us, the only way to persuade us your idea will work is to make it work - do the hard part, build the device and demonstrate it working.

Select as Best AnswerUndo Best Answer

user
caitlinsdad (author)Kiteman2016-08-10

The best thing about these topics is the perpetual flow of comments back and forth which never seem to cease and defy the laws of logic and common sense. Good times.

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)2016-08-08

i request again to forum members that at first try to make a prototype of this idea as it is getting initial energy to rotate with itself power and no one can predict about the feasibility without any prototype.i just posted this idea to know the comments and reviews and want that someone must work on this idea as i dont have any workshop facility to develop a prototype.at first develop a small prototype and let me know the result.any forum member can do some work if he has a workshop facility.

Select as Best AnswerUndo Best Answer

user
Kiteman (author)vikram_gupta112016-08-09

Quite apart from the failure in science understanding, you are asking
other people to invest time, materials and money in building something
that you cannot explain properly in words.

Even though you say you do not have a workshop, you do have access to a computer - draw up a proper scale drawing of what you want built, and you will either persuade people to build it, or you will gain understanding of the reasons why other people say it will not work.

Select as Best AnswerUndo Best Answer

user

You request this??? LOL
It works the other way around: You present a working prototype and we go from there.
Why would we build one for you just to show the flaws we already know?

Select as Best AnswerUndo Best Answer

user
kelseymh (author)vikram_gupta112016-08-08

So you're not even interested in wasting your own time on this foolishness, but you want someone else to do it for you? That is certainly, er, "ambitious."

Select as Best AnswerUndo Best Answer

user
Kiteman (author)vikram_gupta112016-08-08

Did you not see Kelseymh's comment?

Been there, done that. Doesn't work.
The system will come to a stop quickly when the forces on either side
balance. It is very easy to fool yourself if you only have a partial
understanding of physics, and don't want to go to the trouble of
computing something that might prove you wrong.
http://www.lhup.edu/~dsimanek/museum/unwork.htm

Select as Best AnswerUndo Best Answer

user
antoniraj (author)2016-08-08

Do not waste your time on such "Perpetual Motion Machines", they never work. Instead put your time and energy into something useful

Select as Best AnswerUndo Best Answer

user
kelseymh (author)2016-08-05

Been there, done that. Doesn't work. The system will come to a stop quickly when the forces on either side balance. It is very easy to fool yourself if you only have a partial understanding of physics, and don't want to go to the trouble of computing something that might prove you wrong.

http://www.lhup.edu/~dsimanek/museum/unwork.htm

Select as Best AnswerUndo Best Answer

user
Downunder35m (author)kelseymh2016-08-05

Some people who claimed to be able to produce and even sell magnetic motors or them coupled with a generator are gone for good.
A lot turned out to be a hoax but still some of them had a real life and suddenly seemed to have disappeared from this world.
I played a lot with those ideas myself after I got a box with 2500 identical neodymium magnets for free because their chrome finnish cracked off.
At least in theory it is no problem to create a magnet motor that runs forever once you turned it to get going.
But there is also the big hint into the wrong thinking that magnetic fields, mechanics and human thinking work the same way.
If you need to start it then it also means there is a balance and you can't overcome a balance by turning the wheel.
A few years back I saw a demonstration of a magnetic motor here in AU at a local show.
Was an old bloke claiming he worked on it all is life and used it for many years on his farm to power all he needs, which was not much anyway.
He did not like people taking pictures of it without paying money for a machine that he would bild for them within a few months so that was the first give away for me.
The second was that in most vital areas the construction was far too big and thick.
The last was a base or stand as he called it that was about 40x80cm and almost 20cm high.
Can't proof it but am certain some batteries and gears where hiding in the machine.
I simply say that if there is or ever was someone having success here he would have found a way to make his knowledge public for free as it obvious that all other attempts would fail because a big company just buys it and hides it...
Free energy is like the UFO we refer to when we mean in fact aliens.
It might exist but even if it does why would a stupid human find it? ;)

Select as Best AnswerUndo Best Answer

user
Kiteman (author)2016-08-02

Check the Laws of Thermodynamics first...

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)Kiteman2016-08-03

I just want that community members to do some experiment on this Idea to know the feasibility of this Idea and let me know about their experiments result.just do some experiments as I don't have any facility to do some work on this Idea.

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)Kiteman2016-08-03

I just want to do some work on this Idea . This wheel will get INITIAL ENERGY to rotate with itself power as the 3 no. magnet will work to repel or push the wheel when 1 no. magnet will work to lift up 2 no. magnet. This Idea is fulfilling all requirements to make a perpetual machines.I 'm very well known about thermodynamics laws.

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)Kiteman2016-08-03

i want to work on this idea. the wheelbis getting initial energy to rotate with itself so this idea will work. if anyone could help me to develop this tech then it could be a reality.think twice again about its function.

Select as Best AnswerUndo Best Answer

user
vikram_gupta11 (author)Kiteman2016-08-03

kiteman after checking thermodynamic laws i have post this idea . this tech will work definitely.there is a need of some work on this idea and i just want support to convert my idea into a prototype.there is no space for any doubt as this will work.

Select as Best AnswerUndo Best Answer