1581Views27Replies

Author Options:

Halo Plasma Rifles: Sci-fi or a real possibility? Answered

Could a Halo-esque plasma rifle be built, even theoreticaly? what kind of power would it need and what would the meterial it ionizes be? discuss!

28 Replies

user
coilgun (author)2014-07-12

Re your question could a plasma gun be built the answer is yes I no because I designed and built one it worked as follows : A high voltage vaporises some wirewool the resulting plasma halide is electromagneticaly conductive as it expands as a pressure a wateing vacuum exellerates it then a theta pinch from an air coil causes a reverse plasma rotation and by voltage clutching compress the formed vortex to cause eelongation then a rail /MHD gun would further exelleration until it left the gun , i thourght of the plasma- gun whilst studdeing shock tubes on the bell jar . Its construction is as follows : firstly an e.t.g. or electro thermal gun is charged with a small ball of wirewool the e.t.g.was made by encasing a sharpened graphite rod in a steel tube insolating one end so as to connect wires to both casing and core it resembled a shell casing in that I could insert and remove when loading. , secondly x2 bottles with there bottoms removed were formed into a tube around which a

-t.p.g. or theta pinch gun a coiled copper tube formed an air coil , thirdly a tapered graphite tube from a golf club drilled and fitted with wires each side made the r.g. or railgun then x2 powerful magnets arranged centrally over the wires made the rail gun also work an m.h.d. or magnetohydrodynamics system next i connected a vacuum pump and capped the end using a fitting which allowed me to fit a burst disc or thin piece of aluminium foil, other components were x2 s.c.r. which are used to switch high voltages, x2 460volt capasitors a1000-volt voltmeter the voltmeter was there to clutch the coils Emfield so plasy-rotational vortex would form , x2 240volt switches and a 1,500watt strobe circuit to charge the caps . I did also think of lubricating the plasma with carbon 60 molecules which take high temperatures and are spherical and should act as a good plasma lube but didn't no if I could created the right atmosphere it would have needed to be helium at a 7nth of an atmosphear during the build I pondered on how a super heated pinched plasma vortex carrying high velocity would act upon leaving the gun and I concluded that the heat would cause a large shockwave and without adiquate shielding i might well get burnt , also because the plasma would be under high rotation and temperature it would self sustain due to the vacuum created by the heat so velocity would be the same at the target as when it left the gun. So scary was the gun and as I found on line extremely illegal I adopted to never fire it and later dismantled it.

Select as Best AnswerUndo Best Answer

user
ilpug (author)2012-03-05

It could be done, but it would be huge and not portable, and you might set the atmosphere on fire.

Select as Best AnswerUndo Best Answer

user
monsterlego (author)ilpug2012-03-13

+1 and you would probably have very little ammo.

Select as Best AnswerUndo Best Answer

user
ilpug (author)monsterlego2012-03-13

Actually, ammo probably wouldn't be a problem. The main issue would be getting the ammo to go very far.

Select as Best AnswerUndo Best Answer

user
monsterlego (author)ilpug2012-03-14

True. Well I'm guessing it'd run on batteries which would probably drain pretty fast.

Select as Best AnswerUndo Best Answer

user
ilpug (author)monsterlego2012-03-14

Yeah... I can't see it being carried on anything other than a truck or something.

Select as Best AnswerUndo Best Answer

user
the dashing hero (author)2012-03-13

well, in the halo story , the plasma rifles where made by aliens, witch have forien stuff and probably batteries that are WAY more effective than ours and have a way to make plasma so it is possible

Select as Best AnswerUndo Best Answer

user
Sessha (author)2012-02-22

so figure out how to ignite contain and launch thermite sounds possible from this side of the galaxy not sure how to go about it but I think some will figure it out race ya lol

Select as Best AnswerUndo Best Answer

user
peterwyman (author)2012-01-10
user
jlund (author)2011-12-16

It can be built but it won't look like the game plasma I a liquid it is thousand of degrees so in reality the armor in halo would not really stop it it would just melt lol. Sucks for Emil. But you would have to have something to heat some metal beads up in to plasma the hard part is launching it far enough to do anything so yes it can be built but it's hard and gona be heavy and EXPENCIVE

Select as Best AnswerUndo Best Answer

user
makerboy112 (author)2010-04-24

Ahh, I was at school one day thinking about them. I thought if you had an electrical current going through 2 rods (that would probaly form an arc) and comppressed air or something could fire out a rod in between the to rods and the current may have followed it. But you would have to have and incredible source of power, and it would only go a short range. But I dont know if you'd call it a plasma gun. Its more of a electricity type-gun.

Well, thats my theory.
I'll be waiting for a PM or acomment back.
Thank you,
Devon

Select as Best AnswerUndo Best Answer

user
teddy1998 (author)makerboy1122010-06-16

maybe a water gun? and besides, the plasma appears to spontaneously generate between the arms of the gun and some force propels it at high speeds hundreds of yards. ps the "force" is a magnetic field that theoretically, could be made to envelope the plasma and suddenly demagnetized so that the 'envoloped" plasma is pushed away by magnetic force. have u ever read the halo books?

Select as Best AnswerUndo Best Answer

user
makerboy112 (author)teddy19982010-06-18

No, I dont play games that often

Select as Best AnswerUndo Best Answer

user
teddy1998 (author)makerboy1122010-06-20

did u even read my post? i said books not game

Select as Best AnswerUndo Best Answer

user
Rock Soldier (author)2009-05-31

Well, it would need a powerful battery to convert the raw plasma into 'shots' or 'blasts'
It would also need a strong outer shell of course, and some where inside to keep the plasma, and a source of plasma for the gun.
this is all guessing, I barely know what I'm saying

Select as Best AnswerUndo Best Answer

user
teddy1998 (author)Rock Soldier2010-06-16

why does everyone want the plasma INSIDE? why not make a small iron pellet capable of holding a magnetic field for a few seconds and surround that with plasma?

Select as Best AnswerUndo Best Answer

user
REA (author)2009-05-29

first you would need an energy source that is compact and powerful and can last long (find a way to spin a wheel of magnets and it might work), a way to get plasma to form and stay around an object, and some Krispy Kreme doughnuts to celebrate.

Select as Best AnswerUndo Best Answer

user
teddy1998 (author)REA2010-06-16

umm... maybe one of those little engines used to power toy cars?

Select as Best AnswerUndo Best Answer

user
Capn howdy (author)REA2009-05-31

Maybe I should make an instructable on cold fussion then. WHO WILL JOIN ME?? haha

Select as Best AnswerUndo Best Answer

user
REA (author)Capn howdy2009-05-31

i would join if i knew how to do it. but wiki doesnt have instructions like they sometimes do.

Select as Best AnswerUndo Best Answer

user
kid3 (author)2009-09-29

How to condense it. if you put the atmospheric gases in a meltable capsule, suppose, plastic. Then you would have an electric shock through the capsule. The plasma capsule could be held like a traditional bullet, but in place of the primer on a shell it would be conductive metal, like steel with gunpowder in the cartridge behind the capsule. then a shock would run through the powder and propel the capsule. Finally the plasma would probably solidify

Select as Best AnswerUndo Best Answer

user
teddy1998 (author)kid32010-06-16

so ur saying an incendiary bullet or at least a super heated one

Select as Best AnswerUndo Best Answer

user
Trooper14 (author)2010-04-18

Plasma is the 4th state of matter. It is only found on the sun and in lighting. U would pretty need some kind of souped up tazer. As far as the game goes, the plasma rifle in the halo series gives u the power of the sun in ur hands. The true question here is how to weaponize solar plasma?       (Blood plasma is a completly different thing!)

Select as Best AnswerUndo Best Answer

user
kid3 (author)2009-09-28

what about a nuclear power source. and the only substance that can handle that type of heat is tungsten carbide. starwing 123, plasma doesn't necessarily have to have heat to be effective just momentum. and ionized carbon could work to.

Select as Best AnswerUndo Best Answer

user
starwing123 (author)2009-05-31

It could work if we develop future compact powerful technologies, but it would require an enormous amount of energy, enough to produce a small nuclear explosion if you want any decent range. A rail gun or laser would be much more efficient because plasma cools in the air very quickly.

Select as Best AnswerUndo Best Answer

user
Mr Slippy Fist (author)2008-08-18
user
citason (author)Mr Slippy Fist2009-05-29

ummm acully there r some impossable things (like breaking the laws of physics because if you break one the scientist change it to make it impossable lol)

Select as Best AnswerUndo Best Answer