174Views17Replies

Author Options:

Help! Answered

I need help! So, how would I fit 2 firing pins in here (I can't figure out because of the purple connectors (they get in the way)). Please post comments!

Tags:Knexgun

17 Replies

user
smattman22 (author)2010-09-21

Either turn them or cut em down.

Select as Best AnswerUndo Best Answer

user
ajleece (author)2009-01-17

use ball joints of course

Select as Best AnswerUndo Best Answer

user
awsome (author)2008-01-31

rotate the purple things to the outside

Select as Best AnswerUndo Best Answer

user
koolkidd (author)awsome2008-01-31

tried. still doesn't work.

Select as Best AnswerUndo Best Answer

user
the_burrito_master (author)2008-01-26

turn them to the out side hope that helped the gun looks good but you cant pull the firing pin back with the all the yellow connectors there.

Select as Best AnswerUndo Best Answer

user

i know... i need to work on it some more. but i think i got the answer and if it works, ill post it by Feb. 10th (i hope!)

Select as Best AnswerUndo Best Answer

user
Mepain (author)koolkidd2008-01-27

Post it on KI and enter it into the contest!

Select as Best AnswerUndo Best Answer

user
koolkidd (author)Mepain2008-01-27

i'm planning to. so, you post pictures on a site like imageshack,and then you or crestind retrieve them from there and send them to me, and then i can post them or do whatever with them, right?

Select as Best AnswerUndo Best Answer

user
koolkidd (author)koolkidd2008-01-27

i just remembered a comment i saw on KI; if you make a gun, it can be a model, right? 'cause if it doesn't need to shoot to count for the contest, i'll enter my gun and keep working on how to get a firing pin in it.

Select as Best AnswerUndo Best Answer

user
koolkidd (author)Mepain2008-01-27

and do you know how i would make the firing pin and pull it back, or would i just have to get rid of the yellow connectors, which would make the gun a little weaker?

Select as Best AnswerUndo Best Answer

user
Kiteman (author)2008-01-27

You know, if you'd mentioned K'Nex in the title of this thread, I wouldn't be wasting my time making this post now.

Select as Best AnswerUndo Best Answer

user
tech-king (author)2008-01-26

can you just cut off the protruding bits, and not the connecting bits?

Select as Best AnswerUndo Best Answer

user
koolkidd (author)tech-king2008-01-26

yeah, but i still don't know how i would pull the firing pin out far enough for it to be stopped from hitting the bullet

Select as Best AnswerUndo Best Answer

user
tech-king (author)koolkidd2008-01-26

well, thats not the purple things fault. we cannot do a CA without the correct RC (RCCA= Route Cause Corrective Action)

Select as Best AnswerUndo Best Answer

user
tech-king (author)2008-01-26

is the problem the purple things are in the way? because thats easy to fix. get a dremel with a high speed cutting bit and ............

Select as Best AnswerUndo Best Answer

user
koolkidd (author)tech-king2008-01-26

yeah, that's what i said. they in the way, but they need to be there for the gun to break like that.

Select as Best AnswerUndo Best Answer

user
koolkidd (author)koolkidd2008-01-26