Homemade Yugioh duel disk Answered
Today I was bored and made a homemade yu-gi-oh duel disk out of cardboard and some other junk. So first I drew my design and cut out the base part, which held the cards. Of course, I had to measure and trace the cards to make a design that would hold the card in both atk and def position. Then, the hardest part for the base, I designed the spell and trap card zone. Then, by simply cutting out a piece of cardboard and getting one of those pins that fold at the back, I made the field zone. The hardest part of it all was making the deck/graveyard/life-points/arm connector part. The lifepoints area was made by gluing a small calculator onto the d/g/l/a(dgla). The dgla was made of 5 different layers of cardboard so as to make enough room for the graveyard. Next, I got my deck box and cut off part of it and glued it onto the side of the dgla. It worked perfectly for a deck holder with a few miner adjustments to hold the deck in place. Then, with an exacto knife, I cut out the area for the graveyard and added a small slip that pulled up and out to hold the graveyard cards in place. Finally, I cut out a piece of stretchy cloth just smaller than my wrist and glued it on. NOW, WHEN I POST INSTRUCTIONS, YOU CAN MAKE YOUR OWN GENUINE PIECE OF CRAP! lol. Pictures coming soon.