Author Options:

How do I remove the front panel from my Creative SBS 230 speakers? Answered

I'm trying to disassemble my speakers. I've found 2 screws to remove at the bottom, and there are 4 more screws in the front, holding the front panel (with the fabric) to the rest of the body.
Is there a way to get them out without tearing the fabric?

3 Replies

pravardhanBest Answer (author)2010-09-23

Remove all the 4 screws in the back.

Take a Flat - Sharp Screwdriver and just make a push/jack the sides of the speaker (in the groove) with the help of the screwdriver. Both sides (front & back) are glued together.

Pull both the front and back sides and you have successfully removed Creative SBS 230 speakers.

Select as Best AnswerUndo Best Answer

Re-design (author)2009-10-16

Looking at pictures of the speakers I would try popping off the fabric screen.  It looks like a flat screw driver under the edge and they'd come right off.  Or maybe not.

Try it anyway.

Select as Best AnswerUndo Best Answer

frollard (author)2009-10-16

Normally the fabric cover is friction fit on the front, or screwed from the inside.  Look for additional screws hiding under pads, particularly the warranty sticker or make/model sticker.

Select as Best AnswerUndo Best Answer