142Views2Replies

Author Options:

How is it that I can measure voltage across an unplugged wall wart? Answered


I have a 9V wall wart that's been unplugged for 2 days.  I hooked it up to my volt meter with intentions of checking the polarity as I plug it in.  Without plugging in the wall wart I attached the meter leads to the exposed wire of the wall wart.  It immediately showed a voltage of -10 point something.  I was glad to find the wires were backwards which explains my fried regulator; however how is it that I was able to pick up a voltage, even after discharging it the voltage slowly rose again, unplugged!  Does this have anything to do with earths magnetic effects on the inductor?

2 Replies

user
NachoMahmaBest Answer (author)2011-03-06

. The wall wart wires are an antenna and you are picking up stray voltage. If you put a load on the line, the voltage will disappear.

Select as Best AnswerUndo Best Answer

user
lemonie (author)2011-03-06


They have a smoothing capacitor in 'em which will hold a voltage, see also Nacho.

L

Select as Best AnswerUndo Best Answer