Improve your jet boil ! ! or bushbuddy ! !, or any wood gas burner ! ! -- Looking for Carbon Fiber Felt 4 2nd prototype Answered
- searching for carbon Fiver felt to use as a blanket/insulation around top half of the burner units of JetBoils, Bushbuddies, or any wood gas burner- D.I.Y. or otherwise. Use of carbon fiber felt at burner will greatly reduce heat loss to the environment, providing more heat to the pot or billy can being heated.
Here, space must be allowed for additional air entraining to provide combustion air for complete burning of gases--proper shape of openings below burner top plate will allow for a soft shelled wind screen which will morph into a chimney-like structure surrounding pot or can which sits unmodified on top of Jet Boil, Bushbuddy, wood gas burner or hobo stove
Note that a close fit to within as close as 1/4 will increase speed of gases/heat past pot scrubbing off heat to the pot being heated, possibly creating need to raise the height of the chimney
I am using this site in hopes of some one who can find me Carbon Fiber "FELT", I am also open to any conversation on this concept / design.