37Views6Replies

Author Options:

Led stroboscope help Answered

i success to make a led stroboscope with an arduino uno and a 50watt high power led. but the problem was with the lumen of the led. the on time duration of the led is 500 microsecond and the led intensity is poor. i don't know how to make it and maintain the intensity of the led. note that i used a driver for the led "32vdc" and the led is 32vdc .

6 Replies

user
steveastrouk (author)2017-07-19

If its a white LED, they are usually phosphor boosted, that means the LED has to be on for a few milliseconds to come up to brightness. Better use a high intensity single colour - blue perhaps

Select as Best AnswerUndo Best Answer

user
hamada_bio (author)steveastrouk2017-07-20

i used an orange led but the same response and here you are the circuit.

Select as Best AnswerUndo Best Answer

user
steveastrouk (author)hamada_bio2017-07-21
user
iceng (author)hamada_bio2017-07-20
user
rickharris (author)2017-07-19

It would help a lot if you show your circuit.

Select as Best AnswerUndo Best Answer