It's the little metal bar. Anybody know how I can fix it?
The orthodox way to do this is, as others have suggested, buy a new telescoping pin. I think they are specified by length in mm, e.g. 11 mm, 15 mm, something like that. The last place I saw such pins for sale was at the jewelry/watch counter at a Walmart(r) , somewhere in the Former U.S. Another trick that works is to drill out the sockets where the telescoping pin is supposed to go, and then put a piece of wire through these holes instead. I did this to a watch with a plastic body, so it was pretty easy to drill through. I think the drill bit I used was the smallest one I own, maybe 1/16 inch. Also worth mentioning: Before I came up with the idea of drilling holes through my watch, I was using duct tape to hold it together. Duct tape works, although it has a completely different aesthetic than the other repairs I've mentioned. Some people don't like duct tape on their jewelry, or twisted pieces of wire for that matter... ;-)
Select as Best AnswerUndo Best Answer
I had a watch and it was plastic and the bar broke off so now I keep it in my pocket I hope mbrother steve im forms allusion and the state lady at his ihp meeting be cause she told me there will not be a three way meeting without the person ddi state thank you ddi
Are you talking about the telescoping pin? If yes then you need a new one. Any place that sells new bands should probably have new ones.
... including any decent jewelry store. There are a couple of different sizes, but it's generally pretty obvious which one is needed.