I love the mag idea, but wouldn't it be better if you inverted it, so the mag walls stay on the gun and just the top of the mag come off instead, this means it would be easier to reload.
Select as Best AnswerUndo Best Answer
This way, you can have pre-prepared mags so you don't have to manually load the gun a bullet at a time.
Do the bullets not fall out the bottom of the mag?
No, the friction from the side walls of the mag keeps them in.
Just a question, in order for the bullets to chamber, do you have to push the mag pusher yourself to load the next round in?
Depends, sometimes you do depending on the strength of the rubber band. You need a perfectly balanced rubber band for the mag pusher, if it's too strong, the bullets will all fly out of the mag but if it's too weak, they won't come out of the mag at all.
I see. I made it, it is great! I made a new trigger, another pin guide, and a bunch of other mods. I'll get a topic up asap but not now because its really late here.
K. Thought the ammo was white rods that's why.
Im 99/100 gonna build.But, how many cut white rods/ broken pieces do you need?
Uh 4 cut white rods and 1 end cut piece I think. You can get all of them from one bendy rod or grey rod.
Just finished building the "v2" (the one from the second video) and its quite nice. Its a lot of fun 5*I do have an issue though, sometimes when i pull the trigger nothing happens and it takes 3+ trigger pulls before it fires (2 #64s on the ram).
Pull the bottom red connector of the trigger instead of the top one, that should help. I need to make a new trogge anyway, this one isn't very good.
That's how I was doing it, i played with the ram guide a bit to keep the pin straighter and that seemed to help a lot. And does that mean you're still working on this gun? If so I can't wait to see it "truly" finished
New video: http://www.youtube.com/watch?v=16_pSZRGZSg&lc=8zpObx3RuXR0RcW4fPX13TvrPJ-PKHrzgsQcAWKTwhU&feature=inbox
Pretty epic, but KSC made a horizontal mag gun, but its still cool.
I made them before they were even cool. >_> [/attentionwhoring]
So did Kinetic.
What does that have to do with anything haha
5* when finished could you make instructions because this thing in beast
I might, depending on how much range I can get out of it.
i don't care what kind of range it gets it looks aamazing
mag is epic =D
the horizontal mag gun is so cool. definately post when you finish it.
Thanks, I might.
your welcome, ill be lookin forward to it if you decide to post!
I dig the mag =D
No problem man =D You build good stuff =D
Make it modelled into a p90. Real ones have horizontal mags.
This does have a horizontal mag.
Nice concept, I look forward to it being posted. 5*s.
Very very nice. You never explained how a round chambers, but I'm assuming it is similar to a zkar(variant).At least( if I understand correctly ) your last shot wont be the weakest shot in this concept.. I can't wait to see the fleshed out model. Good Work!
Yep, pretty similar to the ZKAR. Thanks.