364Views29Replies

Author Options:

New Side-Arm DMTD (name pending) Answered

Well some of you might have heard dsman and I are making a new side arm mainly by combining our side arms and then adding even more features. Some things we (well I) plan on -Stronger and just as reliable as DMS -Small and as comfortable as TDS -Removable magazine -Slide -A new feature I'm working on. Adjustable site for aiming at distances. So yeah we decided to team up because I honestly just got tired of competing with dsman. I have some questions for you though What ammo do you want us to use? We are leaning towards dark greys. Also what other details do you want? Such as what kind of trigger (true obviously) and also do you want it to be detailed like the gun down below or do you want it to be straight forward like the TDS? Give me any other features you want. This gun isn't what we are working on...yet. We might use it as a base. For anyone curious this gun is my newest version of what used to be the D. Falcon from the video comparing our side arms. It was what I was working on to beat both of them. This is mainly for the concept removable magazine I'm working on.

29 Replies

user
TheDunkis (author)2008-08-19

By the way would whoever is attacking my ratings please stop! Why are you doing that? You knocked four of my guns off of the front page! Four!! Why? Are you that jealous or what? It's really low. Like as low as your IQ at this point.

Select as Best AnswerUndo Best Answer

user
gunman94 (author)TheDunkis2008-09-26

about ratings how do you rate?

Select as Best AnswerUndo Best Answer

user

its not me trust me i have almost all of your guns and enjoy all of them

Select as Best AnswerUndo Best Answer

user
combatknex (author)2008-09-19

for the tape can u put 1 long piece around the whole clip until the two ends of tape meet the stick the to ends together by themselves so the stickky side does not have to be on the conectors?

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)combatknex2008-09-19

*Sigh* I was hoping people would relise the obvious fact that I have a lot more common sense than to make the inside sticky. I happened to place tape on the inside of the magazine too y'know. That would probably work better. Much good it will do you not as if the gun or just the magazine even worked well I would have posted it by now.

Select as Best AnswerUndo Best Answer

user
Katarukito (author)2008-09-14

how does the tape thing work

Select as Best AnswerUndo Best Answer

user
MI6 (author)2008-09-07

The little whites a s ammo definitely . Although there's tape, i love the mag and bendy peice handle. I would reeeealy like to make this gun.

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)MI62008-09-07

little whites? Like rods? I really dislike that ammo and it's hard to work with. Anyways dsman and I kind of put this project on hold for who knows how long. If you want to make the gun I showed then go ahead it isn't that hard to figure out at all from the picture. The top and bendies are just decoration. Yeah I know tape stinks but it was either that or a thick handle and I just hate those.

Select as Best AnswerUndo Best Answer

user
I_am_Canadian (author)2008-08-20

Ive started work on a pistol with mags that clip inside the handle and are ready to shoot right away. No tape!

Select as Best AnswerUndo Best Answer

user
Storm950 (author)I_am_Canadian2008-09-04

On KI, on Mepain's New gun topic I think it was DutchJ posted some pics of a removable mag like how you said on IBY.com I don't have an account there so I am telling you here. It would be a great idea for a pistol I believe!

Select as Best AnswerUndo Best Answer

user
Dutchj (author)Storm9502008-09-04

It's Dutchj, not DutchJ, and that magazine turned out to be crap. After finally finishing the prototype I shot it a couple doze times when the black Y connector in the front broke, because the colliding rods in the magazine hit it.

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)I_am_Canadian2008-08-20

Awesome! I'm sure I'm going to regret wanting to see how you'd make a side arm...you should team up with me and dsman to make the perfect side arm.

Select as Best AnswerUndo Best Answer

user
jollex (author)TheDunkis2008-08-21
user
I_am_Canadian (author)jollex2008-08-21

Perhaps... Im going to try solo for now, but If i need help, ill show you.

Select as Best AnswerUndo Best Answer

user

hey can i join you i am canadian im not the best with knex but i am really good with mechinisms and gun bodys

Select as Best AnswerUndo Best Answer

user

Like I said, Im going to try it by myself, if I need help, i'll ask.

Select as Best AnswerUndo Best Answer

user
Storm950 (author)I_am_Canadian2008-08-21

Mini cannon still coming?

Select as Best AnswerUndo Best Answer

user
I_am_Canadian (author)Storm9502008-08-21

Yeah, I took a picture or two, Ill show you asap.

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)jollex2008-08-21

You're welcome to join me and dsman. Or something I was working on by myself. I was working on a pistol with shells and a slide. Very complicated and I don't think I can get everything to work doing it by myself.

Select as Best AnswerUndo Best Answer

user
jollex (author)TheDunkis2008-08-21

Awesome, can you PM me with pics or more info about both projects?

Select as Best AnswerUndo Best Answer

user
DRADIS (author)2008-08-27
user
Katarukito (author)2008-08-19

why did you put the bendy red rod thing there

Select as Best AnswerUndo Best Answer

user
TheDunkis (author)Katarukito2008-08-20

I didn't actually use a red bendy but that's not the point. I used a bendy with red connectors all the way down it. The only reason I put it there...was because it looked cool to me anyway. It comes out really easily so it's optional.

Select as Best AnswerUndo Best Answer

user
silentassasin21 (author)2008-08-19

are nyou going to post that video

Select as Best AnswerUndo Best Answer

user
silentassasin21 (author)2008-08-19

awesome i fell on the floor drulling when i saw this

Select as Best AnswerUndo Best Answer

user

You can find it on youtube or at my site. I can't get it right now sorry to say. I'm sure it would spark too much controversy if I posted it directly here.

Select as Best AnswerUndo Best Answer