163Views9Replies

Author Options:

Oodammo Light Assault Weapon Answered

Well I built this one in a couple hours, i tried making a reliable Oodammo assault weapon that would use a minimum of pieces, because I am starting to run out, and I need a good assault weapon. It uses a slightly modified version of s0lekill3er's Oodammo Shotbow's magazine, so the mag is horizontal,I tried making it vertical, but it wouldn't work with the amount of ammo and the style I wanted in it. It gets decent range, I got it to shoot Oodammo about 25-30 feet, and it is very accurate. The magazine is removable, it isn't all that practical, but it will come off in a few seconds. The standard magazine capacity is 15, but that can we made bigger or smaller by replacing a few rods. Any criticism is appreciated and wanted, as long as it is constructive, I just tried making a small assault weapon, using Oodammo as a primary form of ammunition, and without using any black rods. The stock was thrown together rather quickly, and is only there for the firing pin guide

10 Replies

user
Wafflicious (author)2009-10-16

I put that mag on the one in my slideshow 100x more reliable thanks for leading me to the mag!

Select as Best AnswerUndo Best Answer

user

OK! I'm making a sideshow tomorrow if you need other pictures too.

Select as Best AnswerUndo Best Answer

user

does it require a black rod for the firing pin? it is the one thing making me stick to slingshots, and i'm glad this mag is more reliable than mine, mine was crap

Select as Best AnswerUndo Best Answer

user
Wafflicious (author)2009-10-16

I just had an idea.  I put a block trigger on the magazine so the pin locks back so you can load it.

Select as Best AnswerUndo Best Answer

user
knexsuperbuilderfreak (author)2009-07-24

i was gonna say you took solekillers desigan but it only on side and like dj said try and move the trigger back

Select as Best AnswerUndo Best Answer

user
DJ Radio (author)2009-07-08

Put the trigger back a bit.

Select as Best AnswerUndo Best Answer

user
TwistedParadox (author)2009-07-08

You could try to structure the back more, it looks very flimsy.

Select as Best AnswerUndo Best Answer

user

the stock was literally just so the pin guide wouldn't bend, i put no effort into it

Select as Best AnswerUndo Best Answer