136Views8Replies

Author Options:

Rubber "sand" What to do with it? Answered

They market the stuff for installing around playground equipment. It's shredded tires. I got a load free.

I plan to use some for backfill in a spot which was very rough to dig out. But I'll have leftovers.

Can I vulcanize it into solid rubber? How?  Mix with concrete to make it lightweight? Or will thermal changes cause rubber to expand /contract too much?   What else could be done w/ it?  

8 Replies

user
Toga_Dan (author)2014-09-03

ended up gluing some on surface of a plywood ramp.

0) wash rubber sand. allow to dry.

1) wirebrush the wood

2) sweep

3) spread vinyl flooring adhesive with a notched trowel.

4)sprinkle rubber sand

5) press it in

6) allow to dry for a day or more

7) sweep loose rubber sand off.

Select as Best AnswerUndo Best Answer

user
Toga_Dan (author)2014-07-13

Grippy surface on a ramp. Spray adhesive , then toss down some rubber bits. I think That's 1 thing I'll do. I washed a quantity of this material today. About 1/3rd seemed to be sand and dirt. Rubber sand sinks in water, while grass clippings and some dirt float. Pouring water off removes dirty water. Then the sand settles below the rubber "sand"

Select as Best AnswerUndo Best Answer

user
Jessie Marie (author)2014-07-13

Use the leftovers for an art project. Maybe you could glue the rubber pieces to a board and spray paint them to make a cool design.

Select as Best AnswerUndo Best Answer

user
Triclaw (author)2014-06-26

glue it to gloves for a super grip

Select as Best AnswerUndo Best Answer

user
Qcks (author)2014-06-15

Like kiteman mentioned, it's already vulcanized, but, what matters is the degree of crosslinking in the polymer. If the rubber is soft, you might be able to press it into a form and then bake it for a short time to get a shape. The trick here is getting things to come into close enough proximity that you get a chemical reaction.

If the stuff is nothing but hard crumbles, you still might be able to use it, but it depends on the amount of sulfur in it after the fact. If there's lots of Sulfur, you can use it as a crosslinking agent, providing the source of sulfur necessary to make more rubber from raw latex. You can occasionally buy raw latex at the store, but there's a number of plants that produce it. milk weed is a good source of fairly high quality latex.

As a final bit, you might be able to burn the stuff to obtain benzene compounds and sulfur dioxide. Benzene is kinda meh, but sulfur dioxide has some distinct uses.

Select as Best AnswerUndo Best Answer

user
Kiteman (author)2014-06-11

It already is vulcanised, so will not melt, just burn.

I'd be tempted to mix some with glue and make tyre-treads on a pair of cheap high-tops. or even completely cover them in the stuff, just because.

Select as Best AnswerUndo Best Answer

user
Toga_Dan (author)Kiteman2014-06-14

I like the idea of a composite. rubber bits + glue...

Select as Best AnswerUndo Best Answer

user
mpilchfamily (author)2014-06-11

It makes a great mulch. In fact they also sell it as mulch. Pluss side it it won't biodegrate so you don't have to re mulch around your trees and bushes.

Select as Best AnswerUndo Best Answer