2Views1Replies

Author Options:

Using Brim was not good? Answered

Picture of

Printer...................ABBAS MINI

Layer height.........0,25 mm

Shell,top,bottom...0,80-0,75-0,75

Infill.......................10%

Brim.....................Yes (Very difficult to clear between letters)

Print speed..........30 mm/s

Filament...............Filatech PLA 1,75 light blue

Temperature........200 C

Heatbed...............No

Room temperature......17 C

Time....................16 minutes (software) , 20 minutes (real)

Slicer...................Cura 15.04.2

1 Replies

user
JON-A-TRONBest Answer (author)2017-01-29

Looks like a really good print for those settings. If I used a 10% infill I don't think mine would have performed as well. I usually use around 30%.

Select as Best AnswerUndo Best Answer