256Views24Replies

Author Options:

ZKAR V2 Mod-Fixes rapid fire problem Answered

Picture of

Hopefully you can see what this is. Replace the borken Y-clip with a grey connector. remove the blue rod and the grey connector in the gun already to make this fit. This new bullet lock fixes the rapid fire problem with the zkar V2.

Tags:ZKARfix

24 Replies

user
TigerNod (author)2010-09-22

Well, I suppose a better way to solve this is to remove a few spacers at the bolt...

Select as Best AnswerUndo Best Answer

user
~Aeronous~ (author)2010-08-22
user
TheFoofinator (author)~Aeronous~2010-09-03

When you push forward the bolt too fast, the yellow rods go too far forward, so the pin does not hit them

Select as Best AnswerUndo Best Answer

user
~Aeronous~ (author)TheFoofinator2010-09-03

I modded my pin guide, its SO much better, and the pin goes forward another 1.5 units. I don't have any problems with it.

Select as Best AnswerUndo Best Answer

user

Magod... you know how lazy I am it took me 4 months to post my crossbow. Fine. I'll try and do it this weekend.

Select as Best AnswerUndo Best Answer

user
Knarez (author)2010-08-08

I never had any problems. As far as I can tell that just adds a lot of friction.

Select as Best AnswerUndo Best Answer

user
Raikou-san (author)Knarez2010-08-08

The gray connector adds a good bit of friction. I'm using a blue clip. It works really well.

Select as Best AnswerUndo Best Answer

user
Knarez (author)Raikou-san2010-08-08

Worked well before, and I doubt it has the same feel. Did you even have problems with how it worked before?

Select as Best AnswerUndo Best Answer

user
Raikou-san (author)Knarez2010-08-08

Occasionally. The blue clip I have on it now pretty much holds the yellow in place, instead of pushing it backwards into the barrel. Is that better or worse?

Select as Best AnswerUndo Best Answer

user
Knarez (author)Raikou-san2010-08-08

Pushing it backwards int he barrel, well thats better than what others said where they say that it moves it forward so the pin can't reach it. Whatever works, I just liked the smoothness of the ramp stuff on mine.

Select as Best AnswerUndo Best Answer

user
Raikou-san (author)Knarez2010-08-08

Well, mine gets good power. The pin (with two gray connectors) just barely hits the yellow rod.

Select as Best AnswerUndo Best Answer

user
Knarez (author)2010-08-08

And really, if you people were any smart you would just take off one of the grey cons on the pin to let it move a bit farther if you had that sort of a problem.

Select as Best AnswerUndo Best Answer

user
Vynash (author)2010-08-08
user
Raikou-san (author)2010-08-07

Cool, I'll add this in before I finish mine.

Select as Best AnswerUndo Best Answer

user
Raikou-san (author)Raikou-san2010-08-07

K, had to change it to a blue clip. Works great now.

Select as Best AnswerUndo Best Answer

user
rec0n (author)Raikou-san2010-08-07

It's good to hear that it works well. Now people can use thier Zakgun's however they want, with it still being able to fire.

Select as Best AnswerUndo Best Answer