8703Views9Replies

Author Options:

surveillance camera, RJ11E? please help Answered

Picture of

Hi I am from Sweden so my English is not entirely good. But anyway I have a surveillance camera with 4-pole RJ11E (Video, Audio, Power, Communications) as the connection. I want to connect the RJ11E cable to a RCA cable so I can see it on my TV. The problem is that I dont know which cable is for what, RJ11E = black, red, green, yellow.
one of them is to power the camera and one of them is to picture and sound.
Please help me thanks.

9 Replies

user
Jack A LopezBest Answer (author)2010-06-05

I found something similar in my junk pile. The cable for my camera has 4 wires:

black: common
red: power, +12 V
green: NTSC video
yellow: audio

A wiring diagram is shown in the second picture. I cannot guarantee that your camera is wired exactly the same way, but I expect they might be similar.

Select as Best AnswerUndo Best Answer

user
olieebolly (author)Jack A Lopez2010-06-05

Thanks! I think this is gonna work, I try it tomorrow I'm too tired for it now. Thanks again! /Oliee

Select as Best AnswerUndo Best Answer

user
steveastrouk (author)olieebolly2010-06-06

Well yours needs 24V for a start, its says so on the label.

Select as Best AnswerUndo Best Answer

user
steveastrouk (author)2010-06-05

Yes, if you have to feed the camera, you need to supply +24 V and ground to it. See if you can find the Phillips VCM7C camera manual, and see if there are any better guides to wire colour. I'm guessing, based on the typical wiring colours found in most cameras. Steve

Select as Best AnswerUndo Best Answer

user
olieebolly (author)steveastrouk2010-06-05

Okey, I have the manual but it is nothing there but thanks i will try this tomorrow. Thanks. Oliee

Select as Best AnswerUndo Best Answer

user
steveastrouk (author)2010-06-05

Take a guess on black for ground, yellow for video and green for audio

Select as Best AnswerUndo Best Answer

user
olieebolly (author)steveastrouk2010-06-05

Hi thanks for se answer but i dont really understand black for ground? and the red wire whats that for? you mean that the black and red wires is for power and the yellow for video and green for audio? Thanks

Select as Best AnswerUndo Best Answer