mains operated 25nos. led Lamp
Instructable posted by
patrickvaz
Hi This is a 25 nos Led operated from mains of 230v supply. I bought a flourscent lamp adapter from a scrap dealer, because its easy to dismantle (a screw in the middle of the fitting) instead of cutting etc.,.the beautiful thing is, in many homes we find damaged, burnt out CFL, adapters etc., w... read more »
Bacon Powered Lamp
Instructable posted by
cammers
Have you ever wondered what you would do for light in an emergency situation where you have no electricity or candles, but you do have a plentiful supply of bacon? Of course you have! But wonder no more, I have the perfect solution. In this instructable I will show you how to create your own Bac... read more »
Tube Light
Instructable posted by
zeyynep
Hey everyone:) That wall-light is all over made of recyled material;cardboard tube..I made a cheap,shiny and environment-friendly lighting fixture and it's also not so difficult to make:)Let's take a look at the materials and steps.. Materials needed 1)12 cardboard tubes (radius=4) 2)2 m. led lig... read more »
Edge Lit Mobile / Night Light
Instructable posted by
sdudley
This instructable is about making an edge-lit mobile to hang in a childs room (or wherever for that matter). Different images can be used for any age or any occasion. For insatnce, you can make one for Halloween by etching skeletons in the acrylic and use white LED's to light it. Etch Christmas t... read more »
Burnout Lamp
Instructable posted by
wholman
Fluorescent lamps are synonymous with the most depressing aspects of modern life: their soulless flickering presides over vast aisles of big box stores, server farms, fields of cubicles, and parking garages. Yet, as individual objects, they are sleek, glossy white tubes, efficient in both form and ... read more »
How to fit LED kitchen lights with fade effect
Instructable posted by
Esterill
In this instructable, I will describe my project to replace my under the cabinet kitchen lights with LEDs. I couldn't resist adding a microcontroller as well. The original lights were flourescent and quite badly fitted. They made a lot of buzzing noise and the bulbs didn't seem to last very long.... read more »
Wagon Wheel Chandelier
Instructable posted by
hummer_head
The idea of the chandelier came to me because in my girlfriend's yard they've made a big shelter planned to be a barbeque with a big table so the whole family can gather. But for now only the shelter part is done. It is made like in old times- wooden shelter, wall made out of stones, clay things. Al... read more »
PVC Solar Light Holder
Instructable posted by
Lehmeier
I recently got some solar lights and stuck them in the planter. I planted some flower seeds and a few months later we could hardly see the solar lights. so after a few designs i came up with this. It puts the lights up off the ground and puts them on the wall. What You Need Supplies 3/4" PVC... read more » | subscribe for free |
