http://www.instructables.com Tue, 29 May 2012 06:12:08 PDT BLOX v1.01 http://www.instructables.com/id/Forge-tweezer-pinza-para-fragua/
Forge tong (pinza para fragua) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FSJ/C912/GNBEVEOC/FSJC912GNBEVEOC.SQUARE2.jpg http://img.instructables.com/files/deriv/FSJ/C912/GNBEVEOC/FSJC912GNBEVEOC.SQUARE.jpg http://img.instructables.com/files/deriv/FSJ/C912/GNBEVEOC/FSJC912GNBEVEOC.SMALL.jpg EB5Y8KRGNJD0CH2 rimar2000 Luego de hacer la fragua, al ir a usarla "en vivo y en directo" caí en cuenta de que es indispensable tener una pinza apropiada. Las piezas chicas deben ser metidas entre las brasas para que calienten, y luego es difícil extraerlas con una pinza común. Este proyecto me insumió aproximadamente una ...
By: rimar2000

Continue Reading »]]> workshop Tue, 10 May 2011 18:02:15 PDT http://www.instructables.com/id/Portable-Solar-Power-Supply-Intro/
Portable Solar Power Supply - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F9C/68Q8/GNFSJGBJ/F9C68Q8GNFSJGBJ.SQUARE2.jpg http://img.instructables.com/files/deriv/F9C/68Q8/GNFSJGBJ/F9C68Q8GNFSJGBJ.SQUARE.jpg http://img.instructables.com/files/deriv/F9C/68Q8/GNFSJGBJ/F9C68Q8GNFSJGBJ.SMALL.jpg EPS82EYGNBERH0D Lewis02 Hello there. You've probably found this Instructable to gather ideas about making a portable solar power supply yourself. I've always been interested in electronics with this project being my latest idea to come wandering out of my head, why not make a portable box on wheels, that I can plug basic...
By: Lewis02

Continue Reading »]]> workshop Tue, 10 May 2011 10:58:18 PDT http://www.instructables.com/id/Rebuilding-a-Hydraulic-Floor-Jack/
Rebuilding a Hydraulic Floor Jack - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJT/AFET/GN77X1E6/FJTAFETGN77X1E6.SQUARE2.jpg http://img.instructables.com/files/deriv/FJT/AFET/GN77X1E6/FJTAFETGN77X1E6.SQUARE.jpg http://img.instructables.com/files/deriv/FJT/AFET/GN77X1E6/FJTAFETGN77X1E6.SMALL.jpg EIZBPUCGMX1S5VZ Phil B This is a 1 1/4 ton hydraulic floor jack my father passed on to me.  He bought it new during the 1970s. It began to leak down a little a few months ago. The lift arm no longer rises when the handle is pumped up and down. (I was able to pull the lift arm up by hand and it settled slowly enough that I...
By: Phil B

Continue Reading »]]> workshop Mon, 9 May 2011 14:06:28 PDT http://www.instructables.com/id/My-forge-mi-fragua/
My forge (mi fragua) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5S/LV3B/GNFSIVYB/F5SLV3BGNFSIVYB.SQUARE2.jpg http://img.instructables.com/files/deriv/F5S/LV3B/GNFSIVYB/F5SLV3BGNFSIVYB.SQUARE.jpg http://img.instructables.com/files/deriv/F5S/LV3B/GNFSIVYB/F5SLV3BGNFSIVYB.SMALL.jpg EYZ3PC0GNFSJJII rimar2000 Hace un tiempo que estaba pensando en que necesito una fragua, para templar y/o cementar herramientas, especialmente las de corte, para fundir aluminio, para doblar hierros gruesos, etc, etc. Cuando yo era un chico, uno de mis trabajos consistía en girar la manivela de la fragua de mi padre, y lueg...
By: rimar2000

Continue Reading »]]> workshop Mon, 9 May 2011 05:19:10 PDT http://www.instructables.com/id/TURN-A-SHOPPING-CART-INTO-A-CHAIR/
TURN A SHOPPING CART INTO A CHAIR - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCS/4LZG/GNFSJ1XV/FCS4LZGGNFSJ1XV.SQUARE2.jpg http://img.instructables.com/files/deriv/FCS/4LZG/GNFSJ1XV/FCS4LZGGNFSJ1XV.SQUARE.jpg http://img.instructables.com/files/deriv/FCS/4LZG/GNFSJ1XV/FCS4LZGGNFSJ1XV.SMALL.jpg E8X9C79GNFSJ1XA TJtheGreyt My son’s high school, in Hall County, Georgia has a tradition for seniors on yearbook day. Not only do they receive yearbooks first, but they also get to bring their own chair to sit in on the gym floor, instead of sitting on the bleachers with the rest of the student body. It is not uncommon to se...
By: TJtheGreyt

Continue Reading »]]> workshop Mon, 9 May 2011 06:31:34 PDT http://www.instructables.com/id/Welding-plastic-soldando-plsticos/
Welding plastic (soldando plýsticos) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FA7/8MS5/GNFSJIBZ/FA78MS5GNFSJIBZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FA7/8MS5/GNFSJIBZ/FA78MS5GNFSJIBZ.SQUARE.jpg http://img.instructables.com/files/deriv/FA7/8MS5/GNFSJIBZ/FA78MS5GNFSJIBZ.SMALL.jpg EL58B1OGNFSJIB7 rimar2000 No todos los plásticos se pueden soldar, y algunos de ellos sueldan mejor que otros, pero la mayoría de los de uso habitual en el hogar sueldan bien. Es una lástima tirar a la basura algo que puede ser reparado con muy poco esfuerzo y sin costo. Además es poco amigable con el medio ambiente. Mucha...
By: rimar2000

Continue Reading »]]> workshop Sun, 8 May 2011 12:47:17 PDT http://www.instructables.com/id/Three-Wheel-Bike-Car/
Three Wheel Bike Car - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWU/7F8F/GNFSJKDT/FWU7F8FGNFSJKDT.SQUARE2.jpg http://img.instructables.com/files/deriv/FWU/7F8F/GNFSJKDT/FWU7F8FGNFSJKDT.SQUARE.jpg http://img.instructables.com/files/deriv/FWU/7F8F/GNFSJKDT/FWU7F8FGNFSJKDT.SMALL.jpg E1E2EJ6GNFSJJYO estructor No gas pump for this car!  A Three Wheel Bike Car, with panniers, a cargo platform, 16 speeds, and a canopy. This project allows for worthwhile grocery trips, pleasurable joy rides, drive-through coffee or bank drive-ups, and the ability to carry what you need, whether that be croquet mallets, warm ...
By: estructor

Continue Reading »]]> workshop Mon, 9 May 2011 01:08:36 PDT http://www.instructables.com/id/mains-operated-led-Lamp/
mains operated 25nos. led Lamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXD/4SXW/GMX1W5UA/FXD4SXWGMX1W5UA.SQUARE2.jpg http://img.instructables.com/files/deriv/FXD/4SXW/GMX1W5UA/FXD4SXWGMX1W5UA.SQUARE.jpg http://img.instructables.com/files/deriv/FXD/4SXW/GMX1W5UA/FXD4SXWGMX1W5UA.SMALL.jpg EMJAP32GMX1Q436 patrickvaz Hi This is a 25 nos Led  operated from mains of 230v supply. I bought a flourscent lamp adapter from a scrap dealer, because its easy to dismantle (a screw in the middle of the fitting) instead of cutting etc.,.the beautiful thing is, in many homes we find damaged, burnt out CFL, adapters etc., w...
By: patrickvaz

Continue Reading »]]> workshop Fri, 6 May 2011 11:15:42 PDT http://www.instructables.com/id/Build-a-Star-Wars-Boba-Fett-plywood-wall-plaque/
Build a Star Wars Boba Fett plywood wall plaque - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2Y/6ICJ/GNBERC35/F2Y6ICJGNBERC35.SQUARE2.jpg http://img.instructables.com/files/deriv/F2Y/6ICJ/GNBERC35/F2Y6ICJGNBERC35.SQUARE.jpg http://img.instructables.com/files/deriv/F2Y/6ICJ/GNBERC35/F2Y6ICJGNBERC35.SMALL.jpg EYYCW8QGNBERBZU rbird77 Allow me to preface... Being a long-time Superman fan, I was happy to find out that a great-nephew (4 years old) was also a fan.  With that, I decided to make him a a superman emblem to hang on his wall.  With that done, all other great neices and nephews then wanted their own plaque as well (in va...
By: rbird77

Continue Reading »]]> workshop Fri, 6 May 2011 06:21:36 PDT http://www.instructables.com/id/How-to-Clean-a-Carburetor/ http://img.instructables.com/files/deriv/FGM/VPTI/GN8NCP9H/FGMVPTIGN8NCP9H.SQUARE2.jpg http://img.instructables.com/files/deriv/FGM/VPTI/GN8NCP9H/FGMVPTIGN8NCP9H.SQUARE.jpg http://img.instructables.com/files/deriv/FGM/VPTI/GN8NCP9H/FGMVPTIGN8NCP9H.SMALL.jpg EBSB1U3GN8NCP9L thickneckarts Cleaning a carburetor can greatly improve engine performance and, often times, solve other fuel/air related problems. If a bike sits for any certain period of time without having the fuel drained, the carburetor could suffer damage and thus cause poor fuel economy or even keep the bike from running ...
By: thickneckarts

Continue Reading »]]> workshop Tue, 3 May 2011 20:35:07 PDT http://www.instructables.com/id/Make-a-Router-lift-out-of-recycled-closet-door-rai/
Make a Router lift out of recycled closet door rails. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMW/IBIQ/GN4CZPG0/FMWIBIQGN4CZPG0.SQUARE2.jpg http://img.instructables.com/files/deriv/FMW/IBIQ/GN4CZPG0/FMWIBIQGN4CZPG0.SQUARE.jpg http://img.instructables.com/files/deriv/FMW/IBIQ/GN4CZPG0/FMWIBIQGN4CZPG0.SMALL.jpg EAOOZRQGMX1S2SE urant Hello! This is my first instuctable, and in it I will show you how to make a Router lift for your router table out of recycled hardware. This is based on 3 closet sleds and rails, that are in tension. Another thing, the design is very forgiving of small manufacturing errors I´m also submitting ...
By: urant

Continue Reading »]]> workshop Sun, 1 May 2011 20:57:58 PDT http://www.instructables.com/id/Single-Step-Stairs/
Single Step Stairs - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3S/2DEF/GMJT3ZHQ/F3S2DEFGMJT3ZHQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F3S/2DEF/GMJT3ZHQ/F3S2DEFGMJT3ZHQ.SQUARE.jpg http://img.instructables.com/files/deriv/F3S/2DEF/GMJT3ZHQ/F3S2DEFGMJT3ZHQ.SMALL.jpg ELCDBQWGMJT3ZH8 Pilgrim55 This project uses only one sheet of plywood.  It makes a four level step that is 32 3/4 inch tall.  I use mine for my kids (2 and 5 yr old) to get on to the trampoline, you can use yours for whatever.  Hope you enjoy! Tools and Materials Tools and Materials needed: 1 Sheet of 3/4 inch Exterier ...
By: Pilgrim55

Continue Reading »]]> workshop Sat, 30 Apr 2011 20:15:50 PDT http://www.instructables.com/id/Speaker-Wires-Under-Baseboards/
Speaker Wires Under Baseboards - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7B/65HN/GMX1QIIT/F7B65HNGMX1QIIT.SQUARE2.jpg http://img.instructables.com/files/deriv/F7B/65HN/GMX1QIIT/F7B65HNGMX1QIIT.SQUARE.jpg http://img.instructables.com/files/deriv/F7B/65HN/GMX1QIIT/F7B65HNGMX1QIIT.SMALL.jpg EUSTB7MGN1I6EPR oakback I have no attic, and no basement or crawlspace to run wires. I also don't have carpet, so I can't just stuff speaker wires under the edges. Previously, I simply stapled the wire to the baseboard, but it looked bad and toddlers like to yank them. After getting a new TV and mounting it on the wall, I ...
By: oakback

Continue Reading »]]> workshop Sat, 30 Apr 2011 10:33:26 PDT http://www.instructables.com/id/Bacon-Powered-Lamp/
Bacon Powered Lamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F09/84JI/GN2XMGHD/F0984JIGN2XMGHD.SQUARE2.jpg http://img.instructables.com/files/deriv/F09/84JI/GN2XMGHD/F0984JIGN2XMGHD.SQUARE.jpg http://img.instructables.com/files/deriv/F09/84JI/GN2XMGHD/F0984JIGN2XMGHD.SMALL.jpg EKIH4V7GMX1R8Z0 cammers Have you ever wondered what you would do for light in an emergency situation where you have no electricity or candles, but you do have a plentiful supply of bacon? Of course you have! But wonder no more, I have the perfect solution. In this instructable I will show you how to create your own Bac...
By: cammers

Continue Reading »]]> workshop Sat, 30 Apr 2011 00:41:50 PDT http://www.instructables.com/id/Easy-Cab-arcade/
Easy Cab (arcade) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F84/5KI2/GN1I6M02/F845KI2GN1I6M02.SQUARE2.jpg http://img.instructables.com/files/deriv/F84/5KI2/GN1I6M02/F845KI2GN1I6M02.SQUARE.jpg http://img.instructables.com/files/deriv/F84/5KI2/GN1I6M02/F845KI2GN1I6M02.SMALL.jpg EYFU2YVGMX1QXK4 uitechclub Here are instructions on how to build an upright arcade cabinet. I have built a couple of arcade cabinets and have enjoyed learning how to build them and customize them. a preview video can be seen here: http://www.youtube.com/watch?v=a-3FZYUdghI I wrote these instructions to assist those who are ...
By: uitechclub

Continue Reading »]]> workshop Fri, 29 Apr 2011 01:34:59 PDT http://www.instructables.com/id/Make-a-modelers-orbital-sander-out-of-a-toothbrush/
Make a modelers orbital sander out of a toothbrush - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FV1/VZ23/GMX1VPA9/FV1VZ23GMX1VPA9.SQUARE2.jpg http://img.instructables.com/files/deriv/FV1/VZ23/GMX1VPA9/FV1VZ23GMX1VPA9.SQUARE.jpg http://img.instructables.com/files/deriv/FV1/VZ23/GMX1VPA9/FV1VZ23GMX1VPA9.SMALL.jpg ET4569SGMX1VP5X WiredWebbo101 I make a lot of models and since I am always short of cash, improvisation is the norm. So trying to sand a new coat of primer in the tiny crevices of a model I had the brain wave to use an electric toothbrush as an orbital sander. 5 minutes later, success! This works so well and with disposable too...
By: WiredWebbo101

Continue Reading »]]> workshop Fri, 29 Apr 2011 00:34:15 PDT http://www.instructables.com/id/hook-closure-from-windscreen-wiper/
hook closure from windscreen wiper - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0T/TB09/GMYNAZUA/F0TTB09GMYNAZUA.SQUARE2.jpg http://img.instructables.com/files/deriv/F0T/TB09/GMYNAZUA/F0TTB09GMYNAZUA.SQUARE.jpg http://img.instructables.com/files/deriv/F0T/TB09/GMYNAZUA/F0TTB09GMYNAZUA.SMALL.jpg EH15MRCGMX1VF12 pennabilli A useful accessory that can be used as a keyring, to hang a cell phone or MP3 player, to keep together rings or washers .... what you need A strip of steel spine from a windshield wiper, a piece of iron wire 14 or 12 gauge (1.5 to 2mm), nippers, round nose and flat nose pliers. You can get winds...
By: pennabilli

Continue Reading »]]> workshop Wed, 27 Apr 2011 01:10:42 PDT http://www.instructables.com/id/I-Heart-Bacon-Buckle-From-Scratch/
I Heart Bacon Buckle. From Scratch - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZ3/NACX/GMX1VJNA/FZ3NACXGMX1VJNA.SQUARE2.jpg http://img.instructables.com/files/deriv/FZ3/NACX/GMX1VJNA/FZ3NACXGMX1VJNA.SQUARE.jpg http://img.instructables.com/files/deriv/FZ3/NACX/GMX1VJNA/FZ3NACXGMX1VJNA.SMALL.jpg EOS4LKNGMX1VJNH Mrballeng This belt buckle is made from copper, coat hanger wire, and 3/16” steel dowel. The heart is painted Vermillion Red which is the same paint used on a 2006 Ford F150. The “I” and the arc are painted with Elmer’s brand paint pens. The silver color on the “bacon” is flux paste. All pieces are soldered t...
By: Mrballeng

Continue Reading »]]> workshop Wed, 27 Apr 2011 12:48:01 PDT http://www.instructables.com/id/How-to-make-a-gauntlet-armor-tutorial/ http://img.instructables.com/files/deriv/FYH/QQHH/GMX1QBDX/FYHQQHHGMX1QBDX.SQUARE2.jpg http://img.instructables.com/files/deriv/FYH/QQHH/GMX1QBDX/FYHQQHHGMX1QBDX.SQUARE.jpg http://img.instructables.com/files/deriv/FYH/QQHH/GMX1QBDX/FYHQQHHGMX1QBDX.SMALL.jpg ESQ1D9VGMX1QBB5 lordguyton This is a gauntlet I made as a film prop for a book trailer (same as a movie trailer) for one of my books. It's fully functional and wearable, and made of brass. Free template available here: http://www.davidjguyton.com/gauntletdavidjguyton.pdf (note that this template is for a LEFT handed gauntlet,...
By: lordguyton

Continue Reading »]]> workshop Wed, 27 Apr 2011 11:48:28 PDT http://www.instructables.com/id/Ceiling-Storage-Solution/
Ceiling Storage Solution - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGB/RT8Z/GMX7SSZ3/FGBRT8ZGMX7SSZ3.SQUARE2.jpg http://img.instructables.com/files/deriv/FGB/RT8Z/GMX7SSZ3/FGBRT8ZGMX7SSZ3.SQUARE.jpg http://img.instructables.com/files/deriv/FGB/RT8Z/GMX7SSZ3/FGBRT8ZGMX7SSZ3.SMALL.jpg EIZQLOIGJQELXUT depotdevoid I'm a bit of a hoarder, I must admit.  Not like, at the level of mental illness or anything, you won't be seeing me on Hoarders any time soon, but I have a tendency to collect bits and pieces of things I think maybe someday I'll use.  Maybe.  Just in case that interestingly shaped piece of whatever ...
By: depotdevoid

Continue Reading »]]> workshop Wed, 27 Apr 2011 00:23:18 PDT http://www.instructables.com/id/Raise-Your-Shower-Head-in-5-Minutes/
Raise Your Shower Head in 5 Minutes - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1Q/L2D5/GMYNAQL7/F1QL2D5GMYNAQL7.SQUARE2.jpg http://img.instructables.com/files/deriv/F1Q/L2D5/GMYNAQL7/F1QL2D5GMYNAQL7.SQUARE.jpg http://img.instructables.com/files/deriv/F1Q/L2D5/GMYNAQL7/F1QL2D5GMYNAQL7.SMALL.jpg EQMDGQSGMYNAQ99 wilgubeast So here's the thing: whenever I move into a new apartment, the shower heads spit out water at approximately my neck. Sometimes shoulders, sometimes chin, but I always end up having to contort myself just to get my hair wet. For a while, I thought the only way to correct this extreme marginalization ...
By: wilgubeast

Continue Reading »]]> workshop Tue, 26 Apr 2011 09:37:17 PDT http://www.instructables.com/id/Wooden-Suitcase/
Wooden Suitcase - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F77/5JA0/GMX1Q0BZ/F775JA0GMX1Q0BZ.SQUARE2.jpg http://img.instructables.com/files/deriv/F77/5JA0/GMX1Q0BZ/F775JA0GMX1Q0BZ.SQUARE.jpg http://img.instructables.com/files/deriv/F77/5JA0/GMX1Q0BZ/F775JA0GMX1Q0BZ.SMALL.jpg EPYBPWYGMX1PWWX seamster This is a little wooden suitcase I made to carry my R/C transmitter. I could have purchased a case to carry my radio gear, but I wanted something different than what everyone else has, pretty cool, and of course, homemade. The design and building process is fairly straight-forward, and could be use...
By: seamster

Continue Reading »]]> workshop Mon, 25 Apr 2011 20:05:03 PDT http://www.instructables.com/id/Pickup-Truck-Ballast-Rack/
Pickup Truck Ballast Rack - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNH/6IYG/GMX7SN34/FNH6IYGGMX7SN34.SQUARE2.jpg http://img.instructables.com/files/deriv/FNH/6IYG/GMX7SN34/FNH6IYGGMX7SN34.SQUARE.jpg http://img.instructables.com/files/deriv/FNH/6IYG/GMX7SN34/FNH6IYGGMX7SN34.SMALL.jpg EBOYMZHGMVSC33Q TheOlMaestro My wife's GMC Sonoma (codenamed "Rustbucket"), like most rear-wheel drive pickups, gets better traction during the winter when counterweights are in the cargo bed. In past years I lashed plastic cat litter containers filled with sand in place, but these would slide, and sometimes break open. This y...
By: TheOlMaestro

Continue Reading »]]> workshop Mon, 25 Apr 2011 12:26:13 PDT http://www.instructables.com/id/KNIFE-FROM-A-NAIL/
KNIFE FROM A NAIL - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FND/GGKB/GMQ2LSZJ/FNDGGKBGMQ2LSZJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FND/GGKB/GMQ2LSZJ/FNDGGKBGMQ2LSZJ.SQUARE.jpg http://img.instructables.com/files/deriv/FND/GGKB/GMQ2LSZJ/FNDGGKBGMQ2LSZJ.SMALL.jpg ETMS9VPGMQ2L4EH pennabilli Forging is fun. Steel needs to be hot forged but iron can be cold forged, needing only to be annealed when hammering has hardened it. Common nails are made of iron, (or of mild steel in this case you must anneal them when you feel they are getting harder to hammer) ; any nail, around 3 inches long, ...
By: pennabilli

Continue Reading »]]> workshop Fri, 22 Apr 2011 07:12:33 PDT http://www.instructables.com/id/Rope-Pump-Elephant-Pump/ http://img.instructables.com/files/deriv/F4H/6B4C/GMFIQ1YR/F4H6B4CGMFIQ1YR.SQUARE2.jpg http://img.instructables.com/files/deriv/F4H/6B4C/GMFIQ1YR/F4H6B4CGMFIQ1YR.SQUARE.jpg http://img.instructables.com/files/deriv/F4H/6B4C/GMFIQ1YR/F4H6B4CGMFIQ1YR.SMALL.jpg EGI89Q2GM9QMO3F SamBurrowes We are team el Elefante and this is our submission for Hydro Do That..., a team project in our second year of Product Design Engineering at Glasgow School of Art. The brief was to raise 5 litres of water 600mm in the most efficient way possible. Supplied with a 24V motor, it was up to each team to ...
By: SamBurrowes

Continue Reading »]]> workshop Wed, 13 Apr 2011 09:04:02 PDT http://www.instructables.com/answers/What-are-the-rails-on-this-Craftsman-table-saw/ http://img.instructables.com/files/deriv/FVJ/NAKZ/GMQ2KU9S/FVJNAKZGMQ2KU9S.SQUARE2.jpg http://img.instructables.com/files/deriv/FVJ/NAKZ/GMQ2KU9S/FVJNAKZGMQ2KU9S.SQUARE.jpg http://img.instructables.com/files/deriv/FVJ/NAKZ/GMQ2KU9S/FVJNAKZGMQ2KU9S.SMALL.jpg QBBOHR1GMQ2KU9Y Winged Foot I have a Craftsman table saw with a cast steel top and extension. It is an older model 113.298150. It has a fence front rail and back rail of aluminum that I do not believe is original. The fence is missing. I need help to determine what brand of fence. I will try to attach profile pictures of the r...
By: Winged Foot

Continue Reading »]]> workshop Wed, 20 Apr 2011 19:06:50 PDT http://www.instructables.com/id/How-to-Build-a-Forge-Gas/
How to Build a Forge (Gas) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4F/8EY1/GLXHSDI5/F4F8EY1GLXHSDI5.SQUARE2.jpg http://img.instructables.com/files/deriv/F4F/8EY1/GLXHSDI5/F4F8EY1GLXHSDI5.SQUARE.jpg http://img.instructables.com/files/deriv/F4F/8EY1/GLXHSDI5/F4F8EY1GLXHSDI5.SMALL.jpg E5TF2O3GLWR16NI makingcustomknives Watch the video version. Having the ability to bring steel to a temperature high enough to change its physical state is essential in knifemaking / bladesmithing. I am going to show you how to build a forge that is simple, safe, and effective. There are countless gas forge builds documented on the i...
By: makingcustomknives

Continue Reading »]]> workshop Fri, 1 Apr 2011 14:07:00 PDT http://www.instructables.com/id/The-Crocodiles-Bucket-Chain-Water-Pump/
The Crocodile's Bucket & Chain Water Pump - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FDM/YW2V/GMIGG3A9/FDMYW2VGMIGG3A9.SQUARE2.jpg http://img.instructables.com/files/deriv/FDM/YW2V/GMIGG3A9/FDMYW2VGMIGG3A9.SQUARE.jpg http://img.instructables.com/files/deriv/FDM/YW2V/GMIGG3A9/FDMYW2VGMIGG3A9.SMALL.jpg EPZI75EGMIGG38O doctor croc We are The Crocodiles and this is our ‘bucket & chain’ style water pump. We are a group of Product Design Engineering students and were given the brief to construct a water pump which lifts 5 litres of water up a height of 600mm, in under 5 minutes, using the 24v motor provided. The winning team wou...
By: doctor croc

Continue Reading »]]> workshop Tue, 19 Apr 2011 09:46:54 PDT http://www.instructables.com/id/Esmagamus-guide-living-with-you-cars-cooling-cir/
Esmagamus guide: living with you car's cooling circuit - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F45/35B3/GMNR9DZL/F4535B3GMNR9DZL.SQUARE2.jpg http://img.instructables.com/files/deriv/F45/35B3/GMNR9DZL/F4535B3GMNR9DZL.SQUARE.jpg http://img.instructables.com/files/deriv/F45/35B3/GMNR9DZL/F4535B3GMNR9DZL.SMALL.jpg EQKFTEBGMJIECA2 Esmagamus This Esmagamus guide covers basic steps anyone can take to avoid any issues with one of you car's most important systems: the cooling circuit. Includes: -Brief introduction to the workings of a closed circuit cooling system; -Maintenance; -Troubleshooting; -Explanation of galvanic corrosion process...
By: Esmagamus

Continue Reading »]]> workshop Mon, 18 Apr 2011 12:53:05 PDT http://www.instructables.com/id/Great-Projects-from-Old-How-to-Magazines/
Great Projects from Old How-to Magazines - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F23/DOWI/GMIGFF87/F23DOWIGMIGFF87.SQUARE2.jpg http://img.instructables.com/files/deriv/F23/DOWI/GMIGFF87/F23DOWIGMIGFF87.SQUARE.jpg http://img.instructables.com/files/deriv/F23/DOWI/GMIGFF87/F23DOWIGMIGFF87.SMALL.jpg EV5KWPNGMJT3M6F Phil B Magazines like Popular Mechanics and Popular Science once published articles on how to build very capable shop tools like tilt arbor table saws, arc welders, and drill presses.  Those articles are still available on-line through Google Books.   The photo shows plans for building a 10 inch tilt...
By: Phil B

Continue Reading »]]> workshop Sat, 16 Apr 2011 05:40:08 PDT http://www.instructables.com/id/10-HP-Hovercraft/
10 HP Hovercraft - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5X/N1UC/GM9QLVL8/F5XN1UCGM9QLVL8.SQUARE2.jpg http://img.instructables.com/files/deriv/F5X/N1UC/GM9QLVL8/F5XN1UCGM9QLVL8.SQUARE.jpg http://img.instructables.com/files/deriv/F5X/N1UC/GM9QLVL8/F5XN1UCGM9QLVL8.SMALL.jpg E0U6UECGM9QLVJW mickydee I was looking for a project that my Grandson and I could build. together. We decided on a hovercraft after watching a TV special. Knowing absolutely nothing about hovercraft we researched the web on the subject  and found the Universal Hovercraft website to be the best source. We had an old 10 HP Br...
By: mickydee

Continue Reading »]]> workshop Wed, 13 Apr 2011 13:28:29 PDT http://www.instructables.com/id/Easy-wall-mounted-storage-bins-for-hartware-parts/
Easy wall mounted storage bins for hardware parts - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJ9/OHWZ/FA0CV5WW/FJ9OHWZFA0CV5WW.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ9/OHWZ/FA0CV5WW/FJ9OHWZFA0CV5WW.SQUARE.jpg http://img.instructables.com/files/deriv/FJ9/OHWZ/FA0CV5WW/FJ9OHWZFA0CV5WW.SMALL.jpg EBU6U9SFA0CV729 Mike Begley If you're a maker, they you probably have acquired a vast assortments of parts, screws, widgets and assorted random bits. And if you're like me, then they've all disappeared into cabinets and drawers, never to be found when you really need them. I decided to organize all my parts into bins that al...
By: Mike Begley

Continue Reading »]]> workshop Tue, 11 Dec 2007 19:13:38 PST http://www.instructables.com/answers/Whats-the-flexible-arm-called-on-lamps-and-other-/ http://img.instructables.com/files/deriv/FUY/QKL3/GM9QKBYX/FUYQKL3GM9QKBYX.SQUARE2.jpg http://img.instructables.com/files/deriv/FUY/QKL3/GM9QKBYX/FUYQKL3GM9QKBYX.SQUARE.jpg http://img.instructables.com/files/deriv/FUY/QKL3/GM9QKBYX/FUYQKL3GM9QKBYX.SMALL.jpg QF2E1UWGM9QKBYY alpe_97 Kind of like a snake....
By: alpe_97

Continue Reading »]]> workshop Sat, 9 Apr 2011 19:39:52 PDT http://www.instructables.com/id/Shelter-from-the-Storm-Remote-Thermometer-Housing/
Shelter from the Storm: Remote Thermometer Housing - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKL/KW0H/GM9QK892/FKLKW0HGM9QK892.SQUARE2.jpg http://img.instructables.com/files/deriv/FKL/KW0H/GM9QK892/FKLKW0HGM9QK892.SQUARE.jpg http://img.instructables.com/files/deriv/FKL/KW0H/GM9QK892/FKLKW0HGM9QK892.SMALL.jpg E78PH7GGM9QL6C1 gwylan I don't much care for going outside to find out how cold or hot it is. It's no good me calling the time-and-temperature phone number, either, as I live 30 miles from town and at a higher altitude. With that in mind I picked up a wireless remote thermometer at Big Lots for $10 or so. I then needed a ...
By: gwylan

Continue Reading »]]> workshop Sat, 9 Apr 2011 09:22:10 PDT http://www.instructables.com/id/the-Rose/ http://img.instructables.com/files/deriv/FFQ/064I/GLWQX9K5/FFQ064IGLWQX9K5.SQUARE2.jpg http://img.instructables.com/files/deriv/FFQ/064I/GLWQX9K5/FFQ064IGLWQX9K5.SQUARE.jpg http://img.instructables.com/files/deriv/FFQ/064I/GLWQX9K5/FFQ064IGLWQX9K5.SMALL.jpg EJSO5R1GLWQX9K2 mongoose24 My first guitar, i had it for a year and then decided that it needed a overhaul. so i sanded it down to the wood ,then i decided a design i wanted on it drew it out on some scratch paper, and then i drew it on the guitar, ( you can make a stencil for it as well), i find it easier to just free ...
By: mongoose24

Continue Reading »]]> workshop Wed, 6 Apr 2011 15:11:57 PDT http://www.instructables.com/id/Tube-Light/
Tube Light - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWR/U5YW/GM0COCVP/FWRU5YWGM0COCVP.SQUARE2.jpg http://img.instructables.com/files/deriv/FWR/U5YW/GM0COCVP/FWRU5YWGM0COCVP.SQUARE.jpg http://img.instructables.com/files/deriv/FWR/U5YW/GM0COCVP/FWRU5YWGM0COCVP.SMALL.jpg E8EB2D3GLWR1KGL zeyynep Hey everyone:) That wall-light is all over made of recyled material;cardboard tube..I made a cheap,shiny and environment-friendly lighting fixture and it's also not so difficult to make:)Let's take a look at the materials and steps.. Materials needed 1)12 cardboard tubes (radius=4) 2)2 m. led lig...
By: zeyynep

Continue Reading »]]> workshop Sat, 2 Apr 2011 13:33:01 PDT http://www.instructables.com/id/The-Bookshelf/
The "Bookshelf" - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZW/53P7/GLWR14Q2/FZW53P7GLWR14Q2.SQUARE2.jpg http://img.instructables.com/files/deriv/FZW/53P7/GLWR14Q2/FZW53P7GLWR14Q2.SQUARE.jpg http://img.instructables.com/files/deriv/FZW/53P7/GLWR14Q2/FZW53P7GLWR14Q2.SMALL.jpg E458HKOGLXHSBGQ buvra Let's make a real "Bookshelf" ! A bookcase is bound to be built on authors. Step 1: Materials 1- 1m² Foreks (that's a PVC based material) (10 mm and 5 mm) 2-  A Drill  3 - 1.5 meter LED and 12V adapter 4 - Soldering Iron and Solder 5 - A can of spray paint (Black or your choice) 6 - Some c...
By: buvra

Continue Reading »]]> workshop Thu, 31 Mar 2011 14:38:32 PDT http://www.instructables.com/id/Folding-coffee-table/
Folding coffee table - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFW/BAID/GLXHS9HP/FFWBAIDGLXHS9HP.SQUARE2.jpg http://img.instructables.com/files/deriv/FFW/BAID/GLXHS9HP/FFWBAIDGLXHS9HP.SQUARE.jpg http://img.instructables.com/files/deriv/FFW/BAID/GLXHS9HP/FFWBAIDGLXHS9HP.SMALL.jpg E535GQHGLWQVGCG alxjnsn Don't we all love coffee tables? In this tutorial I'll show you how to make a coffee table that's foldable so that you can easily hide or move it. This started out as a project for school in which we had to execute an instructable and then try to improve it by own design. The instructable I based m...
By: alxjnsn

Continue Reading »]]> workshop Thu, 31 Mar 2011 08:10:45 PDT http://www.instructables.com/id/Clubhouse-No-Adults-Allowed/ http://img.instructables.com/files/deriv/FDQ/GU39/GLU0HTWW/FDQGU39GLU0HTWW.SQUARE2.jpg http://img.instructables.com/files/deriv/FDQ/GU39/GLU0HTWW/FDQGU39GLU0HTWW.SQUARE.jpg http://img.instructables.com/files/deriv/FDQ/GU39/GLU0HTWW/FDQGU39GLU0HTWW.SMALL.jpg EJ9EL9NGLQCLGG2 airrob Since I was a kid a long long time ago I always had a fascination with building fortes and club houses.  Whether it was out of pillows or cardboard i used whatever was at my disposal.  Now that I have more resources available than just pillows and blankets I decided it was an opportune moment in my ...
By: airrob

Continue Reading »]]> workshop Mon, 28 Mar 2011 10:55:25 PDT http://www.instructables.com/id/Atari-Joystick-Jewelry-Box/
Atari Joystick Jewelry Box - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJ9/6W1M/GLPH1ITG/FJ96W1MGLPH1ITG.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ9/6W1M/GLPH1ITG/FJ96W1MGLPH1ITG.SQUARE.jpg http://img.instructables.com/files/deriv/FJ9/6W1M/GLPH1ITG/FJ96W1MGLPH1ITG.SMALL.jpg EVTJTZLGLFUD9CW annahowardshaw Keep your jewelry or random trinkets in style* with this Atari box! *Disclaimer: May only be considered stylish by a small, but fantastic, subpopulaton.  Space invader not included. Materials and Preparation Materials Shellac Paper Sandpaper Wood glue Wood 1/4" Walnut (Box top and sides) ...
By: annahowardshaw

Continue Reading »]]> workshop Sun, 27 Mar 2011 16:13:32 PDT http://www.instructables.com/id/Wooden-Roller-coaster-model-EngelsEnglish/
Wooden Roller coaster model (Engels/English) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F09/HD1Y/GLL4Y6EU/F09HD1YGLL4Y6EU.SQUARE2.jpg http://img.instructables.com/files/deriv/F09/HD1Y/GLL4Y6EU/F09HD1YGLL4Y6EU.SQUARE.jpg http://img.instructables.com/files/deriv/F09/HD1Y/GLL4Y6EU/F09HD1YGLL4Y6EU.SMALL.jpg EYXMKE2GLL4UK0M fraers Deze Instructable is in het Engels. Voor de Nederlandse versie, klik hier http://tinyurl.com/63ls2fh This Instructable is in English. For the Dutch instructables please click here: http://tinyurl.com/63ls2fh For our physics project, we (Denise and Frank) built a wooden roller coaster model. Using...
By: fraers

Continue Reading »]]> workshop Wed, 23 Mar 2011 10:54:22 PDT http://www.instructables.com/id/Shoji-Screen-Closet-Doors/
Shoji Screen Closet Doors - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FVM/SA2N/GLHRZ5TU/FVMSA2NGLHRZ5TU.SQUARE2.jpg http://img.instructables.com/files/deriv/FVM/SA2N/GLHRZ5TU/FVMSA2NGLHRZ5TU.SQUARE.jpg http://img.instructables.com/files/deriv/FVM/SA2N/GLHRZ5TU/FVMSA2NGLHRZ5TU.SMALL.jpg EMHBCJRGLHRZ666 jwilliamsen I wanted to replace my closet doors with something that fits more closely with the furniture I build and the renovations I've been doing on my house.  I've always hated bypass doors on closets - they make a closet seem dark and cramped,  they're a pain to use, and it always seems that what you want ...
By: jwilliamsen

Continue Reading »]]> workshop Mon, 21 Mar 2011 00:00:19 PDT http://www.instructables.com/id/Cold-War-Dead-Drop-Bolt/
Cold War Dead Drop Bolt - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGY/4Q6H/GLHRZBPM/FGY4Q6HGLHRZBPM.SQUARE2.jpg http://img.instructables.com/files/deriv/FGY/4Q6H/GLHRZBPM/FGY4Q6HGLHRZBPM.SQUARE.jpg http://img.instructables.com/files/deriv/FGY/4Q6H/GLHRZBPM/FGY4Q6HGLHRZBPM.SMALL.jpg ETB9UHMGLGCJXDW S-creek I saw one of these in the spy museum in DC and thought it was pretty awesome.  Recently, I discovered you can buy these, and the commercial version probably holds alot more then mine, but it is fun to make your own cold war spy gear. This might not work very well if you carry it around in your brie...
By: S-creek

Continue Reading »]]> workshop Sun, 20 Mar 2011 22:20:06 PDT http://www.instructables.com/id/Free-Stealth-Apartment-Workbench/
Free Stealth Piano Workbench - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXX/ZMFB/GHTLLUBJ/FXXZMFBGHTLLUBJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FXX/ZMFB/GHTLLUBJ/FXXZMFBGHTLLUBJ.SQUARE.jpg http://img.instructables.com/files/deriv/FXX/ZMFB/GHTLLUBJ/FXXZMFBGHTLLUBJ.SMALL.jpg E9MB4S0GHTLLSBT phish814 Create your own attractive and functional Stealth Workspace for your apartment!  This project solves the dilemma of not having adequate workspace in an apartment or other venue in which an unsightly workbench would look out of place. I'm a DIY'er at heart and have always had access to workspaces -...
By: phish814

Continue Reading »]]> workshop Sun, 20 Mar 2011 19:19:21 PDT http://www.instructables.com/id/Road-Sign-Fence/
Road Sign Fence - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQV/QJII/GLHRY64A/FQVQJIIGLHRY64A.SQUARE2.jpg http://img.instructables.com/files/deriv/FQV/QJII/GLHRY64A/FQVQJIIGLHRY64A.SQUARE.jpg http://img.instructables.com/files/deriv/FQV/QJII/GLHRY64A/FQVQJIIGLHRY64A.SMALL.jpg EKKPYZTGLHRY69N wholman For the 2010-2011 academic year, I have been the construction manager for the Greensboro, Alabama chapter of YouthBuild. YouthBuild (http://www.youthbuild.org) is a national program funded by the Department of Labor that provides low-income young people a chance to study for their GED and acquire tr...
By: wholman

Continue Reading »]]> workshop Sun, 20 Mar 2011 11:15:20 PDT http://www.instructables.com/id/Solar-Oven-With-Tracking/
Solar Oven With Tracking... - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5X/93MC/GLGCJLMB/F5X93MCGLGCJLMB.SQUARE2.jpg http://img.instructables.com/files/deriv/F5X/93MC/GLGCJLMB/F5X93MCGLGCJLMB.SQUARE.jpg http://img.instructables.com/files/deriv/F5X/93MC/GLGCJLMB/F5X93MCGLGCJLMB.SMALL.jpg EZFQHZJGH4A6C6B SolarPoweredGardener Whilst surfing the net one day I came across a site that showed you how to make simple solar cookers. The next day I made one out of cardboard and tin foil. I was amazed at how well it worked. After a lot more surfing and learning I came up with this design that any handyman with basic electrical sk...
By: SolarPoweredGardener

Continue Reading »]]> workshop Sun, 20 Mar 2011 02:11:49 PDT http://www.instructables.com/id/Wind-Lantern-LEDs-powered-by-a-vertical-axis-wind/
Wind Lantern: LEDs powered by a vertical axis wind turbine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCG/8HD5/GLGCJBXR/FCG8HD5GLGCJBXR.SQUARE2.jpg http://img.instructables.com/files/deriv/FCG/8HD5/GLGCJBXR/FCG8HD5GLGCJBXR.SQUARE.jpg http://img.instructables.com/files/deriv/FCG/8HD5/GLGCJBXR/FCG8HD5GLGCJBXR.SMALL.jpg EGVSBD9GLGCJBKP dustynrobots In this project, we’ll build a small, vertical-axis wind turbine, or VAWT for short. These are not as efficient as their horizontal-axis cousins, but they are better suited to urban environments where wind can come from all different directions.  Normally, when you give electricity to a motor, it s...
By: dustynrobots

Continue Reading »]]> workshop Sat, 19 Mar 2011 13:18:05 PDT http://www.instructables.com/id/Edge-Lit-Mobile-Night-Light/
Edge Lit Mobile / Night Light - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FHU/2N3V/GKS0R5MF/FHU2N3VGKS0R5MF.SQUARE2.jpg http://img.instructables.com/files/deriv/FHU/2N3V/GKS0R5MF/FHU2N3VGKS0R5MF.SQUARE.jpg http://img.instructables.com/files/deriv/FHU/2N3V/GKS0R5MF/FHU2N3VGKS0R5MF.SMALL.jpg E4DIYMHGKS0R5M0 sdudley This instructable is about making an edge-lit mobile to hang in a childs room (or wherever for that matter).  Different images can be used for any age or any occasion.  For insatnce, you can make one for Halloween by etching skeletons in the acrylic and use white LED's to light it.  Etch Christmas t...
By: sdudley

Continue Reading »]]> workshop Sat, 19 Mar 2011 09:01:00 PDT http://www.instructables.com/id/How-to-build-an-electric-bike-for-less-than-100/
How to build an electric bike for less than $100 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FIT/78CX/GKS0UVKW/FIT78CXGKS0UVKW.SQUARE2.jpg http://img.instructables.com/files/deriv/FIT/78CX/GKS0UVKW/FIT78CXGKS0UVKW.SQUARE.jpg http://img.instructables.com/files/deriv/FIT/78CX/GKS0UVKW/FIT78CXGKS0UVKW.SMALL.jpg E0STB9KGKS0TMIM iloveairsoftstuff Yes, it is actually possible to build an electric bike for under $100. The secret to doing this is... get most of your materials for free! Now I am not just going to turn you lose and say go find this stuff either. There are a few tricks and tips that I will give you and places to look. In addition,...
By: iloveairsoftstuff

Continue Reading »]]> workshop Thu, 10 Mar 2011 08:29:42 PST http://www.instructables.com/id/Wheels-for-a-heavy-apparatus-ruedas-para-un-apara/
Wheels for a heavy apparatus (ruedas para un aparato pesado) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FY9/S37D/GL4Z6ISY/FY9S37DGL4Z6ISY.SQUARE2.jpg http://img.instructables.com/files/deriv/FY9/S37D/GL4Z6ISY/FY9S37DGL4Z6ISY.SQUARE.jpg http://img.instructables.com/files/deriv/FY9/S37D/GL4Z6ISY/FY9S37DGL4Z6ISY.SMALL.jpg E1EC3M2GKS0R8F9 rimar2000 Hace unas semanas compré un generador eléctrico, que pesa unos 50 Kg cuando está con el tanque de combustible lleno. Yo tengo 66 años y no estoy en condiciones de levantar objetos pesados, así que para trasladarlo unos pocos metros desde el lugar donde está guardado hasta donde lo pondría en funcion...
By: rimar2000

Continue Reading »]]> workshop Sun, 13 Mar 2011 18:38:40 PDT http://www.instructables.com/id/Pocket-laser-engraver/
Pocket laser engraver. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRW/K0IO/GKS0UU80/FRWK0IOGKS0UU80.SQUARE2.jpg http://img.instructables.com/files/deriv/FRW/K0IO/GKS0UU80/FRWK0IOGKS0UU80.SQUARE.jpg http://img.instructables.com/files/deriv/FRW/K0IO/GKS0UU80/FRWK0IOGKS0UU80.SMALL.jpg ED5BQBZGKGL5IIR Groover I have been trying to get my hands on a laser cutter for some time but they always seem out of reach. All the great things that can be done with a real laser cutter tickle the imagination. I feel it's time to share my latest project - a low cost laser engraver,. The workspace is a bit small but non...
By: Groover

Continue Reading »]]> workshop Fri, 11 Mar 2011 03:42:07 PST http://www.instructables.com/id/How-to-save-a-piece-of-History/
How to save a piece of History - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFG/WCYC/GKS0RWQX/FFGWCYCGKS0RWQX.SQUARE2.jpg http://img.instructables.com/files/deriv/FFG/WCYC/GKS0RWQX/FFGWCYCGKS0RWQX.SQUARE.jpg http://img.instructables.com/files/deriv/FFG/WCYC/GKS0RWQX/FFGWCYCGKS0RWQX.SMALL.jpg E6PSK38GKS0T3KD Kentucky-bum This is a brief photo-essay & Instructable wrapped up in one. As you can tell from my other I’bles I am into all things mechanical and (like most engineers) I think ALL bridges are cool. This is a story about an article my wife came across on a soon-to-be homeless bridge, and our efforts to save thi...
By: Kentucky-bum

Continue Reading »]]> workshop Fri, 4 Mar 2011 12:24:11 PST http://www.instructables.com/id/Silhouette-Rocker/ http://img.instructables.com/files/deriv/F2H/FD4J/GKS0RMK8/F2HFD4JGKS0RMK8.SQUARE2.jpg http://img.instructables.com/files/deriv/F2H/FD4J/GKS0RMK8/F2HFD4JGKS0RMK8.SQUARE.jpg http://img.instructables.com/files/deriv/F2H/FD4J/GKS0RMK8/F2HFD4JGKS0RMK8.SMALL.jpg ELMMDRMGKS0RM96 theshort You never know when an idea is going to strike! This one hit me about three beers in on a lazy friday evening. I wanted to create a rocking chair that was a little bit unorthodox. So this is what I ended up with. If you follow the line of the frame you will notice that the seat and back are able to...
By: theshort

Continue Reading »]]> workshop Wed, 2 Mar 2011 14:51:18 PST http://www.instructables.com/id/Simple-coke-can-engine/
Simple coke can engine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCU/TDJK/GKQ36CTM/FCUTDJKGKQ36CTM.SQUARE2.jpg http://img.instructables.com/files/deriv/FCU/TDJK/GKQ36CTM/FCUTDJKGKQ36CTM.SQUARE.jpg http://img.instructables.com/files/deriv/FCU/TDJK/GKQ36CTM/FCUTDJKGKQ36CTM.SMALL.jpg EALNQLKGKJF7K84 scraptopower This is a simple coke can Stirling engine you can make in under an hour. No epoxy or RTV needed, just super-glue. It's all supported by steel wire, with spade connectors for all of the bearings. Important note: It has been found that aluminium drinks cans need additional cooling around the top beca...
By: scraptopower

Continue Reading »]]> workshop Tue, 1 Mar 2011 14:39:17 PST http://www.instructables.com/id/Aluminum-Cribbage-Board/ http://img.instructables.com/files/deriv/FKR/JTQQ/GKLJ2N3M/FKRJTQQGKLJ2N3M.SQUARE2.jpg http://img.instructables.com/files/deriv/FKR/JTQQ/GKLJ2N3M/FKRJTQQGKLJ2N3M.SQUARE.jpg http://img.instructables.com/files/deriv/FKR/JTQQ/GKLJ2N3M/FKRJTQQGKLJ2N3M.SMALL.jpg ECJBDGSGKLIWVDK scbydoob I learned to play cribbage as a child and have enjoyed playing ever since.  It was a great game to learn to help with counting, adding and strategy.  A couple of years ago I decided to take an old chunk of aluminum and machine a cribbage board of my own.  I used autocad to lay out the pattern and an...
By: scbydoob

Continue Reading »]]> workshop Sun, 27 Feb 2011 17:12:24 PST http://www.instructables.com/id/One-Pallet-Chair/ http://img.instructables.com/files/deriv/FJ7/8JQ5/GKQ3D6DY/FJ78JQ5GKQ3D6DY.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ7/8JQ5/GKQ3D6DY/FJ78JQ5GKQ3D6DY.SQUARE.jpg http://img.instructables.com/files/deriv/FJ7/8JQ5/GKQ3D6DY/FJ78JQ5GKQ3D6DY.SMALL.jpg EQ5I5A0GKQ30I7G casvandegoor This Adirondack chair was built from just one pallet! Download the Google SketchUp model here. Here's how to make splendid material-efficient pallet furniture: 1. Scavenge: Pallets are everywhere. Some are in great conditions and some have a couple of broken beams. Some are free and some cost a c...
By: casvandegoor

Continue Reading »]]> workshop Tue, 1 Mar 2011 08:25:43 PST http://www.instructables.com/id/Leatherman-Wave-Spork/
Leatherman Wave Spork - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FML/7R2K/GKLJ2QF6/FML7R2KGKLJ2QF6.SQUARE2.jpg http://img.instructables.com/files/deriv/FML/7R2K/GKLJ2QF6/FML7R2KGKLJ2QF6.SQUARE.jpg http://img.instructables.com/files/deriv/FML/7R2K/GKLJ2QF6/FML7R2KGKLJ2QF6.SMALL.jpg ENN06KWGKLJ6AZD teodoropires A while ago, I saw the ITable of cutlery the (fabulous) Leatherman Wave . As my wave is the new model, I decided to join spoon and fork making a spork and add a feature. -------------------------------------------------------- A algum tempo atrás, vi o able de como fazer talheres para o (fabuloso)...
By: teodoropires

Continue Reading »]]> workshop Mon, 28 Feb 2011 11:56:45 PST http://www.instructables.com/id/Burnout-Lamp/
Burnout Lamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMM/ED25/GKLIWQ7P/FMMED25GKLIWQ7P.SQUARE2.jpg http://img.instructables.com/files/deriv/FMM/ED25/GKLIWQ7P/FMMED25GKLIWQ7P.SQUARE.jpg http://img.instructables.com/files/deriv/FMM/ED25/GKLIWQ7P/FMMED25GKLIWQ7P.SMALL.jpg ECO3ROLGKLIWQ0Q wholman Fluorescent lamps are synonymous with the most depressing aspects of modern life: their soulless flickering presides over vast aisles of big box stores, server farms, fields of cubicles, and parking garages.  Yet, as individual objects, they are sleek, glossy white tubes, efficient in both form and ...
By: wholman

Continue Reading »]]> workshop Sun, 27 Feb 2011 12:10:38 PST http://www.instructables.com/id/Urban-LA-Closet-Workspace/ http://img.instructables.com/files/deriv/F78/LW9U/GKLJ5W4K/F78LW9UGKLJ5W4K.SQUARE2.jpg http://img.instructables.com/files/deriv/F78/LW9U/GKLJ5W4K/F78LW9UGKLJ5W4K.SQUARE.jpg http://img.instructables.com/files/deriv/F78/LW9U/GKLJ5W4K/F78LW9UGKLJ5W4K.SMALL.jpg EP17OSXGKLIWNAC daufhammer Living in LA, it can be hard to find a good space to spread out and make things. Being an avid maker, hacker and tinkerer, living in an apartment made that problem even more frustrating! After a couple years of projects spread out on the kitchen table and floor it hit me! Why not use that closet tha...
By: daufhammer

Continue Reading »]]> workshop Sat, 26 Feb 2011 23:57:12 PST http://www.instructables.com/id/Concept-Snowblower-AV1110/ http://img.instructables.com/files/deriv/FKB/GXHT/GKI1OTIV/FKBGXHTGKI1OTIV.SQUARE2.jpg http://img.instructables.com/files/deriv/FKB/GXHT/GKI1OTIV/FKBGXHTGKI1OTIV.SQUARE.jpg http://img.instructables.com/files/deriv/FKB/GXHT/GKI1OTIV/FKBGXHTGKI1OTIV.SMALL.jpg ET8CMSXGKI1OTGW piaferre Finishing the Morphology course at my university is a BIG deal (I study industrial design). We finish with a 5 month proyect in which we design a concept. We call it the "space ship" project. We start by designing lines, then surfaces, then shapes. Then we convine our shape with our partner's (we te...
By: piaferre

Continue Reading »]]> workshop Wed, 23 Feb 2011 20:34:00 PST http://www.instructables.com/id/Wood-and-Steel-Sidetables/ http://img.instructables.com/files/deriv/FVA/OTTX/GKKEKVSZ/FVAOTTXGKKEKVSZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FVA/OTTX/GKKEKVSZ/FVAOTTXGKKEKVSZ.SQUARE.jpg http://img.instructables.com/files/deriv/FVA/OTTX/GKKEKVSZ/FVAOTTXGKKEKVSZ.SMALL.jpg EUM7MU5GKKEKVRY NADYSTudiOs Hello Instructables!  These sidetables were made by my father 15 years ago.  Everything was scrap, except for the quarter inch steel used in the base, which only cost $30.  The steel pipes were scrap schedule 40 piping, and the wood would have been used for firewood.  As you can see, both table-to...
By: NADYSTudiOs

Continue Reading »]]> workshop Thu, 24 Feb 2011 17:47:21 PST http://www.instructables.com/id/Tin-Can-Stirling-Engine/
Tin Can Stirling Engine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWV/SBHL/GGPF3O7E/FWVSBHLGGPF3O7E.SQUARE2.jpg http://img.instructables.com/files/deriv/FWV/SBHL/GGPF3O7E/FWVSBHLGGPF3O7E.SQUARE.jpg http://img.instructables.com/files/deriv/FWV/SBHL/GGPF3O7E/FWVSBHLGGPF3O7E.SMALL.jpg E4JKWDPGFI0H59S PKM How I built a hot air engine almost entirely from junk.  I've wanted to build one of these ever since discovering stirling engines in about 2003.  Spending the weekend making things in Steveastrouk's workshop gave me the opportunity to make the precision parts I'd need, and I knew most of the engine...
By: PKM

Continue Reading »]]> workshop Thu, 24 Feb 2011 14:17:00 PST http://www.instructables.com/id/Bed-Side-Baby-Cribs-For-Anabelle-Anais/
Bed Side Baby Cribs For Anabelle Anais - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1W/XNY3/GKGL3WG9/F1WXNY3GKGL3WG9.SQUARE2.jpg http://img.instructables.com/files/deriv/F1W/XNY3/GKGL3WG9/F1WXNY3GKGL3WG9.SQUARE.jpg http://img.instructables.com/files/deriv/F1W/XNY3/GKGL3WG9/F1WXNY3GKGL3WG9.SMALL.jpg EPKT3PDGKGL631J ALEX_HOLAND Hi, more than an istructables, this is an "idea show", because i will just put the images of my wok,since inglish is not my leanguaje, and, the measures of the proyect are made to fit my needs, i dont think its necessary. Any Way, im glad to answer any question that ypu may have. Thanks Piece...
By: ALEX_HOLAND

Continue Reading »]]> workshop Tue, 22 Feb 2011 08:32:39 PST http://www.instructables.com/id/WikiSeat-A-Catalyst-for-DIY-Seating/
WikiSeat: A Catalyst for DIY Seating - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FO5/FW91/GJQEM15I/FO5FW91GJQEM15I.SQUARE2.jpg http://img.instructables.com/files/deriv/FO5/FW91/GJQEM15I/FO5FW91GJQEM15I.SQUARE.jpg http://img.instructables.com/files/deriv/FO5/FW91/GJQEM15I/FO5FW91GJQEM15I.SMALL.jpg EW7C35ZGJQEIDME dr_weidinger A WikiSeat is a three legged stool that is built by hand. Each WikiSeat starts with a Catalyst that acts as a central support structure. The creator of a WikiSeat has the freedom to gather materials and find their own methods for building the seat. WikiSeat creators can share what they have made and...
By: dr_weidinger

Continue Reading »]]> workshop Sat, 19 Feb 2011 13:11:00 PST http://www.instructables.com/id/Matching-14kt-Gold-Mokume-Gane-Wedding-Rings/
Matching 14kt Gold Mokume Gane Wedding Rings - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0E/LXE4/GBF5L12E/F0ELXE4GBF5L12E.SQUARE2.jpg http://img.instructables.com/files/deriv/F0E/LXE4/GBF5L12E/F0ELXE4GBF5L12E.SQUARE.jpg http://img.instructables.com/files/deriv/F0E/LXE4/GBF5L12E/F0ELXE4GBF5L12E.SMALL.jpg E6L9MILGBF5L0Z8 hereiam In this instructable, I will show you how to make matching wedding rings out of 14kt gold mokume gane (pronounced mow-koo-may gah-nay, which means wood-grained metal).  While it may seem like a complex technique, I assure you anyone can make these with the right knowledge, the right tools, and enoug...
By: hereiam

Continue Reading »]]> workshop Fri, 18 Feb 2011 20:49:38 PST http://www.instructables.com/id/Woodturning-with-a-drill-press/
Woodturning with a drill press - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKG/AMAW/GKAYXOMO/FKGAMAWGKAYXOMO.SQUARE2.jpg http://img.instructables.com/files/deriv/FKG/AMAW/GKAYXOMO/FKGAMAWGKAYXOMO.SQUARE.jpg http://img.instructables.com/files/deriv/FKG/AMAW/GKAYXOMO/FKGAMAWGKAYXOMO.SMALL.jpg ECR1F5DGIYWWBPW tholopotami Using very few materials and common hand  tools you can turn your drill press  into a small lathe for wood and plastic. Three examples of increasing difficulty are described here in some detail, a bottle stopper, a tool handle and  a cylindrical piece. These examples serve to illustrate ...
By: tholopotami

Continue Reading »]]> workshop Fri, 18 Feb 2011 01:51:56 PST http://www.instructables.com/id/Curved-Cabinet/
Curved Cabinet - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLS/YNTF/GJQEAWN1/FLSYNTFGJQEAWN1.SQUARE2.jpg http://img.instructables.com/files/deriv/FLS/YNTF/GJQEAWN1/FLSYNTFGJQEAWN1.SQUARE.jpg http://img.instructables.com/files/deriv/FLS/YNTF/GJQEAWN1/FLSYNTFGJQEAWN1.SMALL.jpg EZY7TGBGJQEL83C mrdebos I promised my girlfriend that I'd make her a new nightstand some time ago, and yesterday I finally had the time to do it. And it being Valentine's and all it also proved to be a perfect gift :) Let me show you how I made this curved cabinet... Plans & materials The plan is to make a curved cabi...
By: mrdebos

Continue Reading »]]> workshop Tue, 15 Feb 2011 07:50:12 PST http://www.instructables.com/id/Valentines-Puffin-Mirror-Charm/
Valentine's Puffin Mirror-Charm - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5N/NDBE/GJQEL4T3/F5NNDBEGJQEL4T3.SQUARE2.jpg http://img.instructables.com/files/deriv/F5N/NDBE/GJQEL4T3/F5NNDBEGJQEL4T3.SQUARE.jpg http://img.instructables.com/files/deriv/F5N/NDBE/GJQEL4T3/F5NNDBEGJQEL4T3.SMALL.jpg E19B33IGJC42HZZ Kiteman I try and Make something for Valentine's every year. I was defeated by circumstances last year, and it was close call this year, but I succeeded! The techniques I used here could be used to make mirror charms to many themes. (Note that some of the photos are from the test-piece I made first.) ...
By: Kiteman

Continue Reading »]]> workshop Mon, 14 Feb 2011 14:10:07 PST http://www.instructables.com/id/Solar-Lamp-On-a-Pole/
Solar Lamp On a Pole, Under a Bowl - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFH/9SVE/GK3TO0IJ/FFH9SVEGK3TO0IJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FFH/9SVE/GK3TO0IJ/FFH9SVEGK3TO0IJ.SQUARE.jpg http://img.instructables.com/files/deriv/FFH/9SVE/GK3TO0IJ/FFH9SVEGK3TO0IJ.SMALL.jpg E118T0IGJQEH4Z7 laxap In search of a solar lamp for our park place, I found no lamp suitable for a pole, neither cheap nor expensive. All I found were solar lamps for wall mount, the best ones approx 100$. The best lamp I found, suited for wall mount, was conforming IP44. Obviously, this is not sufficient: it will be co...
By: laxap

Continue Reading »]]> workshop Sun, 13 Feb 2011 11:51:29 PST http://www.instructables.com/id/Ultimate-Mancave-Coffee-Table-from-Recycled-Materi/ http://img.instructables.com/files/deriv/FKW/MD5Q/GJQEH0N8/FKWMD5QGJQEH0N8.SQUARE2.jpg http://img.instructables.com/files/deriv/FKW/MD5Q/GJQEH0N8/FKWMD5QGJQEH0N8.SQUARE.jpg http://img.instructables.com/files/deriv/FKW/MD5Q/GJQEH0N8/FKWMD5QGJQEH0N8.SMALL.jpg EHXFCIKGJQEH0D8 outdooradventureman Here is how you can update your mancave with an awesome coffee table basically for free!!!! I just used old materials that were thrown out and headed for the landfill. Excuse the mess in the back of the garage. I am doing several projects at once. This is my first project to ever build out of wood...
By: outdooradventureman

Continue Reading »]]> workshop Sat, 12 Feb 2011 23:53:03 PST http://www.instructables.com/id/12V-Solenoid-Beam-Engine-built-from-aluminium-scr/
12V Solenoid Beam Engine, built from aluminium scraps and scavanged componants. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FS8/EZI7/GK0YUUOC/FS8EZI7GK0YUUOC.SQUARE2.jpg http://img.instructables.com/files/deriv/FS8/EZI7/GK0YUUOC/FS8EZI7GK0YUUOC.SQUARE.jpg http://img.instructables.com/files/deriv/FS8/EZI7/GK0YUUOC/FS8EZI7GK0YUUOC.SMALL.jpg EN0L8MZGJQEKBIJ Dr Qui This is how I built a little beam engine powered by a solenoid which runs on 12v DC. Due to the harsh winter I have been stuck in the house most of the time over the last few months, before Christmas I gathered up all the old hard drives, CD ROMS, Floppy drives, a zip drive, 2 printers, a flat...
By: Dr Qui

Continue Reading »]]> workshop Sat, 12 Feb 2011 13:20:57 PST http://www.instructables.com/id/Old-Console-TV-to-a-Bar/
Old Console TV to a Bar - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7W/MAKY/GJQEGGP9/F7WMAKYGJQEGGP9.SQUARE2.jpg http://img.instructables.com/files/deriv/F7W/MAKY/GJQEGGP9/F7WMAKYGJQEGGP9.SQUARE.jpg http://img.instructables.com/files/deriv/F7W/MAKY/GJQEGGP9/F7WMAKYGJQEGGP9.SMALL.jpg EKDDOLIGJQEGFXK fersidhe This is my first instructable, and I apologise, I did not take pictures of the entire process, I did not think to about posting to instructables, but next time I will. My father's bar is an old 1920's wooden ice chest that has been refinished. My older brother has laid claim to that particular inhe...
By: fersidhe

Continue Reading »]]> workshop Wed, 9 Feb 2011 10:32:26 PST http://www.instructables.com/id/Folding-Low-Table/
Folding Low Table - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQF/I36L/GJQEDDUN/FQFI36LGJQEDDUN.SQUARE2.jpg http://img.instructables.com/files/deriv/FQF/I36L/GJQEDDUN/FQFI36LGJQEDDUN.SQUARE.jpg http://img.instructables.com/files/deriv/FQF/I36L/GJQEDDUN/FQFI36LGJQEDDUN.SMALL.jpg EPZ479DGJQEDDSJ wholman I've been a bit of a nomad for a couple of years now, drifting from state to state in search of opportunities to make my work and meet great people.  Given my frequent moving and tight budget, my apartments have been small, filled with a lot of roommates, or both.  Whenever a social occasion present...
By: wholman

Continue Reading »]]> workshop Mon, 7 Feb 2011 20:12:11 PST http://www.instructables.com/id/The-Snow-Ripper-Rip-snow-from-your-roof-in-minut/
The Snow Ripper - Rip snow from your roof in minutes. 1/2 Snow rake - 1/2 Ripper / Cutter. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZ6/6TAV/GJQEJ4HT/FZ66TAVGJQEJ4HT.SQUARE2.jpg http://img.instructables.com/files/deriv/FZ6/6TAV/GJQEJ4HT/FZ66TAVGJQEJ4HT.SQUARE.jpg http://img.instructables.com/files/deriv/FZ6/6TAV/GJQEJ4HT/FZ66TAVGJQEJ4HT.SMALL.jpg EJOC6ZPGJQEFEIR billbach Easily remove snow from your roof. After receiving over 50 inches of snow this winter and you are like me you went to the local hardware store to find a snow rake for the roof.  Only to be told they are sold out. Well necessity being the mother of invention forced me to make my own. ...
By: billbach

Continue Reading »]]> workshop Thu, 3 Feb 2011 22:31:37 PST http://www.instructables.com/id/Hand-made-Knife-Sharpening-Jig/
Hand made Knife Sharpening Jig - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FS2/C99J/GJHV8U3X/FS2C99JGJHV8U3X.SQUARE2.jpg http://img.instructables.com/files/deriv/FS2/C99J/GJHV8U3X/FS2C99JGJHV8U3X.SQUARE.jpg http://img.instructables.com/files/deriv/FS2/C99J/GJHV8U3X/FS2C99JGJHV8U3X.SMALL.jpg E8FHKDQGJHV8UHS deebee2u I have seen some jigs on the internet for giving a knife blank a "grind" or profile.  This is the step before the final edge that is used for cutting.   I have started to work scrap metal into knives, so I thought I would try my hand at making  one of these jigs. I wanted it to 1)  fit my small wor...
By: deebee2u

Continue Reading »]]> workshop Mon, 31 Jan 2011 16:24:13 PST http://www.instructables.com/id/Precision-Temperature-Controller/
Precision Temperature Controller - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2T/PN1K/GJHV9B5K/F2TPN1KGJHV9B5K.SQUARE2.jpg http://img.instructables.com/files/deriv/F2T/PN1K/GJHV9B5K/F2TPN1KGJHV9B5K.SQUARE.jpg http://img.instructables.com/files/deriv/F2T/PN1K/GJHV9B5K/F2TPN1KGJHV9B5K.SMALL.jpg ENI3CBRGJHVLIHC Random_Canadian A problem of precision temperature control was presented. What was needed was an inexpensive yet accurate system to measure and control the temperature of a home built plastic injection molding machine. I have also used this for controlling the temperature on a plastic vacuum forming machine.  ...
By: Random_Canadian

Continue Reading »]]> workshop Wed, 2 Feb 2011 11:25:39 PST http://www.instructables.com/id/Cigar-Box-Ukulele/
Cigar Box Ukulele - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWE/P2VX/GJC42BSX/FWEP2VXGJC42BSX.SQUARE2.jpg http://img.instructables.com/files/deriv/FWE/P2VX/GJC42BSX/FWEP2VXGJC42BSX.SQUARE.jpg http://img.instructables.com/files/deriv/FWE/P2VX/GJC42BSX/FWEP2VXGJC42BSX.SMALL.jpg EDG8CYOGJC42AZ6 action pig For those who are buried in empty cigar boxes and lacking in ukuleles, this is for you.   A Brief History Cigar box instruments date back to the 1800's, when cigars began to be packaged in smaller units in handy wooden boxes.  The great depression caused an increase in the popularity of handmade in...
By: action pig

Continue Reading »]]> workshop Thu, 27 Jan 2011 23:00:22 PST http://www.instructables.com/id/Kitchen-Remodeling/ http://img.instructables.com/files/deriv/FAX/L8WW/GJHVLE0D/FAXL8WWGJHVLE0D.SQUARE2.jpg http://img.instructables.com/files/deriv/FAX/L8WW/GJHVLE0D/FAXL8WWGJHVLE0D.SQUARE.jpg http://img.instructables.com/files/deriv/FAX/L8WW/GJHVLE0D/FAXL8WWGJHVLE0D.SMALL.jpg O5TFPBQGJHVLDYZ Carleyy Want to remodel your kitchen but don't want the hassel of hiring a contractor or home designer (or break the bank).  These DIY Kitchen Remodeling projects will teach you how to install your own counter tops, cabinets, and so much more! Concrete Countertops for the Kitchen - Solid Surface on the Ch...
By: Carleyy

Continue Reading »]]> workshop Tue, 1 Feb 2011 16:23:43 PST http://www.instructables.com/id/How-to-fit-LED-kitchen-lights-with-fade-effect/
How to fit LED kitchen lights with fade effect - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLG/GBS8/GJHVGEBQ/FLGGBS8GJHVGEBQ.SQUARE2.jpg http://img.instructables.com/files/deriv/FLG/GBS8/GJHVGEBQ/FLGGBS8GJHVGEBQ.SQUARE.jpg http://img.instructables.com/files/deriv/FLG/GBS8/GJHVGEBQ/FLGGBS8GJHVGEBQ.SMALL.jpg ETYMX9MGJHVGE7W Esterill In this instructable, I will describe my project to replace my under the cabinet kitchen lights with LEDs.  I couldn't resist adding a microcontroller as well. The original lights were flourescent and quite badly fitted.  They made a lot of buzzing noise and the bulbs didn't seem to last very long....
By: Esterill

Continue Reading »]]> workshop Tue, 1 Feb 2011 14:05:41 PST http://www.instructables.com/id/Building-with-2x4s-no-glue-nails-fasteners-or/ http://img.instructables.com/files/deriv/FAX/9REV/GJHVD64L/FAX9REVGJHVD64L.SQUARE2.jpg http://img.instructables.com/files/deriv/FAX/9REV/GJHVD64L/FAX9REVGJHVD64L.SQUARE.jpg http://img.instructables.com/files/deriv/FAX/9REV/GJHVD64L/FAX9REVGJHVD64L.SMALL.jpg E3KCBD8GJHVGQRO nahaj Have a pile of 2x4's, and a while before you use them? Well, if you don't cut them, or use fasteners or glue, they will still be usable in a new project after trying these projects. The dome was more than 30 feet across. Note that the dome is NOT a geodesic dome, it is actually a lofted tiling. ...
By: nahaj

Continue Reading »]]> workshop Mon, 31 Jan 2011 10:33:17 PST http://www.instructables.com/id/Bandsaw-Box-Basics/
Bandsaw Box Basics - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FF4/BNGT/GJHV8RQR/FF4BNGTGJHV8RQR.SQUARE2.jpg http://img.instructables.com/files/deriv/FF4/BNGT/GJHV8RQR/FF4BNGTGJHV8RQR.SQUARE.jpg http://img.instructables.com/files/deriv/FF4/BNGT/GJHV8RQR/FF4BNGTGJHV8RQR.SMALL.jpg E7SBJFYGJHV8RPN malsonc Bandsaw boxes are not new, but they are not very common in some regions. While bandsaw boxes come in a wide variety of shapes and sizes, I’m writing this Instructable for a box made from a section of log that is about 10 inches tall and about 6-8 inches in diameter. I’m using red cedar for this box,...
By: malsonc

Continue Reading »]]> workshop Mon, 31 Jan 2011 14:16:56 PST http://www.instructables.com/id/How-to-Build-an-Earthbag-Dome/
How to Build an Earthbag Dome - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZI/R6J9/GJHVL5JY/FZIR6J9GJHVL5JY.SQUARE2.jpg http://img.instructables.com/files/deriv/FZI/R6J9/GJHVL5JY/FZIR6J9GJHVL5JY.SQUARE.jpg http://img.instructables.com/files/deriv/FZI/R6J9/GJHVL5JY/FZIR6J9GJHVL5JY.SMALL.jpg E25SRELGJHV8PWQ Owen Geiger Note: If you’re new to earthbag building, first read the introductory Step-by-Step Earthbag Building Instructable and How to Build an Earthbag Roundhouse . Also, my new Earthbag Building Guide and Earthbag Building DVD are now available. We built this earthbag dome at our home in Thailand for Mo...
By: Owen Geiger

Continue Reading »]]> workshop Mon, 31 Jan 2011 04:31:19 PST http://www.instructables.com/id/How-to-Build-an-Earthbag-Roundhouse/
How to Build an Earthbag Roundhouse - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F86/T3ZO/GJC3TD7C/F86T3ZOGJC3TD7C.SQUARE2.jpg http://img.instructables.com/files/deriv/F86/T3ZO/GJC3TD7C/F86T3ZOGJC3TD7C.SQUARE.jpg http://img.instructables.com/files/deriv/F86/T3ZO/GJC3TD7C/F86T3ZOGJC3TD7C.SMALL.jpg ESJYXR9GJC3PHM0 Owen Geiger Note: If you’re new to earthbag building, please read the introductory Step-by-Step Earthbag Building Instructable first. Also, my new Earthbag Building Guide and Earthbag Building DVD are now available. We built this earthbag roundhouse in 2010 as part of an earthbag workshop in Thailand, and fin...
By: Owen Geiger

Continue Reading »]]> workshop Fri, 28 Jan 2011 06:43:56 PST http://www.instructables.com/id/Make-Some-Nice-TV-Trays/
Make Some Nice TV Trays - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRL/A6Q1/GJC3PIVL/FRLA6Q1GJC3PIVL.SQUARE2.jpg http://img.instructables.com/files/deriv/FRL/A6Q1/GJC3PIVL/FRLA6Q1GJC3PIVL.SQUARE.jpg http://img.instructables.com/files/deriv/FRL/A6Q1/GJC3PIVL/FRLA6Q1GJC3PIVL.SMALL.jpg EDBWHFPGJC3TD4K Phil B Pictured is one of a set of TV trays I made for my wife.  Most sets contain four trays.  She wanted six. Materials required are-- 1/2 inch A-D grade fir plywood Plastic countertop laminate Plastic laminate adhesive Good hardwood of your choice for legs and trim Hardwood dowels Wood glue Aluminum ...
By: Phil B

Continue Reading »]]> workshop Sat, 29 Jan 2011 09:16:02 PST http://www.instructables.com/id/Trash-Concrete/
Trash Concrete - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZQ/38Q5/GJ7MQLF8/FZQ38Q5GJ7MQLF8.SQUARE2.jpg http://img.instructables.com/files/deriv/FZQ/38Q5/GJ7MQLF8/FZQ38Q5GJ7MQLF8.SQUARE.jpg http://img.instructables.com/files/deriv/FZQ/38Q5/GJ7MQLF8/FZQ38Q5GJ7MQLF8.SMALL.jpg EDR4V6FGJ7MMAVI Thinkenstein I wanted to extend a hillside patio area.  Hauling in dirt fill by hand was more work than I wanted to do, and it would probably settle over time.  Cement was better.  The gravel in regular concrete is heavy and costs money.  I decided to replace it with free plastic bottles and pieces of Styrofoam...
By: Thinkenstein

Continue Reading »]]> workshop Mon, 24 Jan 2011 14:07:08 PST http://www.instructables.com/id/Amazing-Cardboard-Shelf/
Amazing Cardboard Shelf! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLQ/43X7/GJ7MUHJK/FLQ43X7GJ7MUHJK.SQUARE2.jpg http://img.instructables.com/files/deriv/FLQ/43X7/GJ7MUHJK/FLQ43X7GJ7MUHJK.SQUARE.jpg http://img.instructables.com/files/deriv/FLQ/43X7/GJ7MUHJK/FLQ43X7GJ7MUHJK.SMALL.jpg EMS0HQQGJ7MH9YQ Loshanagan In this Instructable, I'll be showing you how to make a small, useful cardboard shelf. It'll probably cost you next to nothing if you have some cardboard lying around the house, but it will provide a sense of accomplishment and happiness. Let's begin! Choose/Create Your Design When making a card...
By: Loshanagan

Continue Reading »]]> workshop Sun, 23 Jan 2011 12:20:53 PST http://www.instructables.com/id/Strip-Table-in-oak-and-walnut/
Strip Table in oak and walnut - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FC5/MA9H/GIWZM4SA/FC5MA9HGIWZM4SA.SQUARE2.jpg http://img.instructables.com/files/deriv/FC5/MA9H/GIWZM4SA/FC5MA9HGIWZM4SA.SQUARE.jpg http://img.instructables.com/files/deriv/FC5/MA9H/GIWZM4SA/FC5MA9HGIWZM4SA.SMALL.jpg ES1LLHQGISO506O hogthrob The seed idea for this instructable came in part from Wholmans fantastic Scrap Table http://www.instructables.com/id/Scrap-Table/. However I needed to make something that would not look out of place againts the rest of the furniture in my house. The timber is shop bought (about £120) of oak and bl...
By: hogthrob

Continue Reading »]]> workshop Sat, 22 Jan 2011 10:23:32 PST http://www.instructables.com/id/Homemade-100-HP-Motor-Controller-for-an-Electric-C/
Homemade 100 HP Motor Controller for an Electric Car - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGF/1GX5/GJ2830DB/FGF1GX5GJ2830DB.SQUARE2.jpg http://img.instructables.com/files/deriv/FGF/1GX5/GJ2830DB/FGF1GX5GJ2830DB.SQUARE.jpg http://img.instructables.com/files/deriv/FGF/1GX5/GJ2830DB/FGF1GX5GJ2830DB.SMALL.jpg E4PU6EPGJ289VX1 MPaulHolmes This instructable explains how to build your own 100 HP (peak) motor controller for use in an electric car or motorcycle conversion.  It can take any voltage up to 144v, and the peak current is 500 amps.  The cost of the components is a few hundred dollars, which means you can save over $1000 by put...
By: MPaulHolmes

Continue Reading »]]> workshop Thu, 20 Jan 2011 13:43:24 PST http://www.instructables.com/id/Process-of-Making-a-Scrap-Knife/ http://img.instructables.com/files/deriv/FUG/N71J/GIWZLM8Y/FUGN71JGIWZLM8Y.SQUARE2.jpg http://img.instructables.com/files/deriv/FUG/N71J/GIWZLM8Y/FUGN71JGIWZLM8Y.SQUARE.jpg http://img.instructables.com/files/deriv/FUG/N71J/GIWZLM8Y/FUGN71JGIWZLM8Y.SMALL.jpg E9UBPK2GIYWWFI2 cowscankill This is a video I made a long time ago that I just found recently.  Decided to upload because it pretty much covers the entire process I use for making a scrap parts knife. Enjoy!
By: cowscankill

Continue Reading »]]> workshop Sun, 16 Jan 2011 16:54:23 PST http://www.instructables.com/id/Lard-Lamp-a-solid-fat-burner-made-by-lost-wax-ca/
Lard Lamp - a solid fat burner made by lost wax casting - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYV/8A1P/GIWZLWN5/FYV8A1PGIWZLWN5.SQUARE2.jpg http://img.instructables.com/files/deriv/FYV/8A1P/GIWZLWN5/FYV8A1PGIWZLWN5.SQUARE.jpg http://img.instructables.com/files/deriv/FYV/8A1P/GIWZLWN5/FYV8A1PGIWZLWN5.SMALL.jpg EPZCWJAGIWZLFN2 Mangetout Here's how to make a very simple little fat-burning lamp that is specially designed to be used with fuels that are solid at normal room temperatures, such as the leftover fats from cooking bacon, sausages, duck, lamb, etc. The reason it is able to do this is that surrounding the wick, there are pro...
By: Mangetout

Continue Reading »]]> workshop Sun, 16 Jan 2011 19:58:21 PST http://www.instructables.com/id/Solar-tracker-using-an-old-hard-drive/ http://img.instructables.com/files/deriv/FRN/VC7S/GIYWWEI7/FRNVC7SGIYWWEI7.SQUARE2.jpg http://img.instructables.com/files/deriv/FRN/VC7S/GIYWWEI7/FRNVC7SGIYWWEI7.SQUARE.jpg http://img.instructables.com/files/deriv/FRN/VC7S/GIYWWEI7/FRNVC7SGIYWWEI7.SMALL.jpg E157G9NGIWZLM6K scraptopower An idea I tried out for a solar tracker. There's two solar panels wired so that they oppose each other, these panels are connected to the read head of the hard drive. There's a neodymium magnet on the end of the read head which trips the one of two reed switches depending on which way the read head ...
By: scraptopower

Continue Reading »]]> workshop Sun, 16 Jan 2011 12:17:24 PST http://www.instructables.com/id/Laser-Cut-Table/
Laser Cut Table - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZX/I8XZ/GITI750Q/FZXI8XZGITI750Q.SQUARE2.jpg http://img.instructables.com/files/deriv/FZX/I8XZ/GITI750Q/FZXI8XZGITI750Q.SQUARE.jpg http://img.instructables.com/files/deriv/FZX/I8XZ/GITI750Q/FZXI8XZGITI750Q.SMALL.jpg E6F3DWQGITHIQXU trebuchet03 A flat packable side table for the temporarily furniture-less nomad. Laser cut furniture! Design If not obvious, the intent is to make this table appear to look like the cutaway of an unguided bomb. The table is made from three pieces - the base (2 parts) and a top. I left some holes in the c...
By: trebuchet03

Continue Reading »]]> workshop Thu, 13 Jan 2011 07:57:40 PST http://www.instructables.com/id/Ice-claws/
Ice claws - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FH0/I7NQ/GINP5A0X/FH0I7NQGINP5A0X.SQUARE2.jpg http://img.instructables.com/files/deriv/FH0/I7NQ/GINP5A0X/FH0I7NQGINP5A0X.SQUARE.jpg http://img.instructables.com/files/deriv/FH0/I7NQ/GINP5A0X/FH0I7NQGINP5A0X.SMALL.jpg ECV9T3KGINP5A0L KresimirPregernik 20 days ago I was in the field. And there was snow and ice...and I slip down. So, I decided to buy ice cleats/crampons. Well, here was limit on real alps high quality stuffs ... i.e. high prices. So, went to nearby metalworking shop... Start See. T profile plate 2 mm thick. with holes for screws...
By: KresimirPregernik

Continue Reading »]]> workshop Mon, 10 Jan 2011 08:59:25 PST http://www.instructables.com/id/My-Second-Stirling-Engine/ http://img.instructables.com/files/deriv/FMA/V8XT/GINP9TTM/FMAV8XTGINP9TTM.SQUARE2.jpg http://img.instructables.com/files/deriv/FMA/V8XT/GINP9TTM/FMAV8XTGINP9TTM.SQUARE.jpg http://img.instructables.com/files/deriv/FMA/V8XT/GINP9TTM/FMAV8XTGINP9TTM.SMALL.jpg EQUPFKVGINP9TSK Profanisaurus My second working stirling engine from tin cans 'n stuff, skip to about 1:10 if you just want the engine footage.
By: Profanisaurus

Continue Reading »]]> workshop Tue, 11 Jan 2011 00:37:11 PST http://www.instructables.com/id/Pixel-Trash-Can/
Pixel Trash Can - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7H/Z5MO/GINORL7X/F7HZ5MOGINORL7X.SQUARE2.jpg http://img.instructables.com/files/deriv/F7H/Z5MO/GINORL7X/F7HZ5MOGINORL7X.SQUARE.jpg http://img.instructables.com/files/deriv/F7H/Z5MO/GINORL7X/F7HZ5MOGINORL7X.SMALL.jpg E4P1XBTGELSQDV0 BrittLiv From the second I saw this paper pixel trash can I fell in love with it and I knew that I wanted to make a real life model. I love working with wood, because I grew up on a lumber yard and now that I'm living in a city I really miss the smell of it. Piece by piece I am equipping my cellar room, so ...
By: BrittLiv

Continue Reading »]]> workshop Mon, 10 Jan 2011 09:01:59 PST http://www.instructables.com/id/Foil-Solar-Panels-for-Windows-VERY-Easy/
Foil Solar Panels for Windows (VERY Easy) Build one an hour! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2M/FV7F/GI0TJK7E/F2MFV7FGI0TJK7E.SQUARE2.jpg http://img.instructables.com/files/deriv/F2M/FV7F/GI0TJK7E/F2MFV7FGI0TJK7E.SQUARE.jpg http://img.instructables.com/files/deriv/F2M/FV7F/GI0TJK7E/F2MFV7FGI0TJK7E.SMALL.jpg E6PBLMSGI0TG4ZS OhMike Ohio Mike introduces this project by video.     If you do Twitter... Please follow me there too http://twitter.com/iSMTV I was watching my first video again originally describing the project and discovered this... The day I made this video the ...
By: OhMike

Continue Reading »]]> workshop Sun, 26 Dec 2010 08:43:22 PST http://www.instructables.com/answers/What-material-is-my-desk-made-out-of/ http://img.instructables.com/files/deriv/F3I/DCA0/GINP4YGY/F3IDCA0GINP4YGY.SQUARE2.jpg http://img.instructables.com/files/deriv/F3I/DCA0/GINP4YGY/F3IDCA0GINP4YGY.SQUARE.jpg http://img.instructables.com/files/deriv/F3I/DCA0/GINP4YGY/F3IDCA0GINP4YGY.SMALL.jpg QEV0OVFGINP4YH0 killer dragon In the picture you can see my desk (sorry for bad pics.) I wan't to sort of build some stuff on to it and I want to use the same material  but I don't know what the material is made out of or where to buy it. I think it is wood coated in some sort of plastic but I don't know. I wouldn't call it bump...
By: killer dragon

Continue Reading »]]> workshop Fri, 7 Jan 2011 20:01:10 PST http://www.instructables.com/id/How-To-Make-A-Fold-out-SofaFutonBed-Frame/
How To Make A Fold out Sofa/Futon/Bed Frame - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8Y/G648/FW4JU1BC/F8YG648FW4JU1BC.SQUARE2.jpg http://img.instructables.com/files/deriv/F8Y/G648/FW4JU1BC/F8YG648FW4JU1BC.SQUARE.jpg http://img.instructables.com/files/deriv/F8Y/G648/FW4JU1BC/F8YG648FW4JU1BC.SMALL.jpg ECRLD36FVW22WJV VVBoredGuy I enjoy relaxing on a sofa and in my bed, and so it may come as no surprise that I would wish to combine the two. After searching Ikea and several other shops, I found the average price for a "tri-fold" futon was in the region of 120GBP ($150). I found this pretty steep for what is basically some pl...
By: VVBoredGuy

Continue Reading »]]> workshop Mon, 3 Jan 2011 07:01:39 PST http://www.instructables.com/id/Tiffin-Box-from-Tuna-Cans/
Tiffin Box from Tuna Cans - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYH/HH0M/GI0TKI18/FYHHH0MGI0TKI18.SQUARE2.jpg http://img.instructables.com/files/deriv/FYH/HH0M/GI0TKI18/FYHHH0MGI0TKI18.SQUARE.jpg http://img.instructables.com/files/deriv/FYH/HH0M/GI0TKI18/FYHHH0MGI0TKI18.SMALL.jpg E88RRL3GI0TKHSS calischs A tiffin box is a small lunchbox used to carry a tiffin, or light meal.  The lunchbox consists of a stack of steel or ceramic compartments for each food item.  According to wikipedia, the term originated in colonial India, and today in Mumbai there exists a complex network tiffin-boxed lunch deliver...
By: calischs

Continue Reading »]]> workshop Wed, 5 Jan 2011 15:41:25 PST http://www.instructables.com/id/Dust-Sniper-quiet-extractor-system/
Dust Sniper (quiet extractor system) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F81/WR22/GITHD6GM/F81WR22GITHD6GM.SQUARE2.jpg http://img.instructables.com/files/deriv/F81/WR22/GITHD6GM/F81WR22GITHD6GM.SQUARE.jpg http://img.instructables.com/files/deriv/F81/WR22/GITHD6GM/F81WR22GITHD6GM.SMALL.jpg EQTB8EDG6MPQEG2 bongodrummer In this project we turn a bunch of old free stuff, including two old household vacuums into what is arguably the most useful and necessary of workshop tools: the dust extractor. But why stop there? Lets make a really fantastically effective dust extractor, one that is whisper quiet, never stops suck...
By: bongodrummer

Continue Reading »]]> workshop Sun, 2 Jan 2011 14:48:23 PST http://www.instructables.com/id/My-Phil-B-type-carbon-arc-torch-mi-soplete-de-arc/
My Phil B type carbon arc torch (mi soplete de arco a carbýn, tipo Phil B) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNF/MIWK/GI0TM2P2/FNFMIWKGI0TM2P2.SQUARE2.jpg http://img.instructables.com/files/deriv/FNF/MIWK/GI0TM2P2/FNFMIWKGI0TM2P2.SQUARE.jpg http://img.instructables.com/files/deriv/FNF/MIWK/GI0TM2P2/FNFMIWKGI0TM2P2.SMALL.jpg E1ZHQ45GI0TJGRQ rimar2000 PLEASE HELPME WITH ENGLISH ERRORS. I WILL APPRECIATE YOUR KINDNESS! Luego de haber hecho dos versiones de sopletes de un solo carbón, esta y esta, finalmente decidí que ya era hora de experimentar lo que hizo Phil B hace un tiempo. Obviamente, lo hice a mi manera, con las cosas que encontré a mano....
By: rimar2000

Continue Reading »]]> workshop Wed, 29 Dec 2010 19:35:48 PST http://www.instructables.com/id/Strap-Wraps/
Strap Wraps - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRU/DBK6/GI0TM2AZ/FRUDBK6GI0TM2AZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FRU/DBK6/GI0TM2AZ/FRUDBK6GI0TM2AZ.SQUARE.jpg http://img.instructables.com/files/deriv/FRU/DBK6/GI0TM2AZ/FRUDBK6GI0TM2AZ.SMALL.jpg EKVW5TIGI0TD1SC CrLz Quick hack for tie down straps- increase contact friction to improve holding power by making these simple sleeves to slip on tie downs. Friction is a function of surface contact area, force and the coefficient of friction.  When I car-top my kayaks, these three variables are what I have to work wit...
By: CrLz

Continue Reading »]]> workshop Wed, 29 Dec 2010 15:01:23 PST http://www.instructables.com/id/Two-Tone-Table/
Two-Tone Table - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL7/6DAC/GI0TGP20/FL76DACGI0TGP20.SQUARE2.jpg http://img.instructables.com/files/deriv/FL7/6DAC/GI0TGP20/FL76DACGI0TGP20.SQUARE.jpg http://img.instructables.com/files/deriv/FL7/6DAC/GI0TGP20/FL76DACGI0TGP20.SMALL.jpg ESSPIR8GI0TGP1H wholman Made from a mixture of scrap and new lumber, this coffee table uses a DIY lamination method to create a solid surface from strips of wood without the need for heavy bar clamps.  All of the strips are yellow pine except for one contrasting stripe of cedar running all the way through the structure.  A...
By: wholman

Continue Reading »]]> workshop Wed, 29 Dec 2010 21:10:30 PST http://www.instructables.com/id/How-To-Make-a-Standing-Desk-and-Music-Workstation/
How To Make a Standing Desk and Music Workstation - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGV/327X/GGPFBP4K/FGV327XGGPFBP4K.SQUARE2.jpg http://img.instructables.com/files/deriv/FGV/327X/GGPFBP4K/FGV327XGGPFBP4K.SQUARE.jpg http://img.instructables.com/files/deriv/FGV/327X/GGPFBP4K/FGV327XGGPFBP4K.SMALL.jpg EVQX2ATGGPETN2X cecomp64 Introduction This build was inspired by my desire to get all my music gear organized and accessible.  I designed this desk to have lots of surface area, and lots of space underneath to house a digital piano, amp, and other floor-bound musical gear.  The desktop is spacious to accommodate a midi con...
By: cecomp64

Continue Reading »]]> workshop Thu, 25 Nov 2010 23:19:05 PST http://www.instructables.com/id/Convert-a-Wine-Barrel-into-a-Cabinet/
Convert a Wine Barrel into a Cabinet - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FO3/RJYZ/GI0TCVA1/FO3RJYZGI0TCVA1.SQUARE2.jpg http://img.instructables.com/files/deriv/FO3/RJYZ/GI0TCVA1/FO3RJYZGI0TCVA1.SQUARE.jpg http://img.instructables.com/files/deriv/FO3/RJYZ/GI0TCVA1/FO3RJYZGI0TCVA1.SMALL.jpg E603K3ZGI0TCUY9 weon Edit: Wow my first Instructable was featured on the front page, thank you so much! I'm glad to be able to share our wee project with anyone that's interested. If you liked what you read and saw, please take a second to rate this Instructable. Happy New Years everyone! Malcolm Gill Just before Chr...
By: weon

Continue Reading »]]> workshop Wed, 29 Dec 2010 01:22:35 PST http://www.instructables.com/id/Quick-and-easy-brazing-aluminum-copper-and-nonfer/
Quick and easy brazing aluminum, copper and nonferrous metals - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FO7/VCDO/GGC2USVS/FO7VCDOGGC2USVS.SQUARE2.jpg http://img.instructables.com/files/deriv/FO7/VCDO/GGC2USVS/FO7VCDOGGC2USVS.SQUARE.jpg http://img.instructables.com/files/deriv/FO7/VCDO/GGC2USVS/FO7VCDOGGC2USVS.SMALL.jpg E5GTIEWGGC2U58D steam_cannon Brazing is a quick and inexpensive alternative to welding. The equipment in this project can be bought for as little as $30 dollars. Brazing is also much easier then welding, it's a lot like using a glue gun. Brazed metal can also be stronger then welds. And for personal projects and small productio...
By: steam_cannon

Continue Reading »]]> workshop Sat, 13 Nov 2010 23:58:41 PST http://www.instructables.com/id/Steam-punk-Singing-bird/
Steam punk Singing bird - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQ6/ULDS/GHZ6XPKS/FQ6ULDSGHZ6XPKS.SQUARE2.jpg http://img.instructables.com/files/deriv/FQ6/ULDS/GHZ6XPKS/FQ6ULDSGHZ6XPKS.SQUARE.jpg http://img.instructables.com/files/deriv/FQ6/ULDS/GHZ6XPKS/FQ6ULDSGHZ6XPKS.SMALL.jpg EZLK7LUGHZ6XPG7 keith newstead My idea was to use found objects and a shop brought singing bird mec to produce a singing bird in a cage similar to the old Victorian type but with a modern twist. I purchased the bird mec from here http://hobby.uk.com/battery-powered-singing-bird.html . It runs off a small battery and has a horizon...
By: keith newstead

Continue Reading »]]> workshop Tue, 21 Dec 2010 15:45:03 PST http://www.instructables.com/id/Chainsaw-mill/
Chainsaw Mill part 1 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUD/ZCHF/GHTLRBPS/FUDZCHFGHTLRBPS.SQUARE2.jpg http://img.instructables.com/files/deriv/FUD/ZCHF/GHTLRBPS/FUDZCHFGHTLRBPS.SQUARE.jpg http://img.instructables.com/files/deriv/FUD/ZCHF/GHTLRBPS/FUDZCHFGHTLRBPS.SMALL.jpg EVK1G43GHFK7Z2A KentaNolin Many times a project calls for materials of specific dimensions and quality that can't be obtained, financially or logistically. A chainsaw mill is a tool that can be utilized to produce beams for timber framing or to cut slabs for wood working. Being mobile, it can be on site or right where the tre...
By: KentaNolin

Continue Reading »]]> workshop Sun, 19 Dec 2010 23:21:04 PST http://www.instructables.com/id/Chess-Board-Key-Holder-Organiser/
Chess Board Key Holder & Organiser - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F9R/UCBW/GHX7NFZQ/F9RUCBWGHX7NFZQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F9R/UCBW/GHX7NFZQ/F9RUCBWGHX7NFZQ.SQUARE.jpg http://img.instructables.com/files/deriv/F9R/UCBW/GHX7NFZQ/F9RUCBWGHX7NFZQ.SMALL.jpg EAHHN2MGHX7NFSV anluwagi291110 This was a broken down chess board with loose chess pieces that my 10-year-old son has ignored for the last 2 years. Being the hoarder that I am, I refuse to throw things away with the intention of recycling or creating something new out of them. So with this ignored toy, I came up with an idea of t...
By: anluwagi291110

Continue Reading »]]> workshop Mon, 20 Dec 2010 13:24:42 PST http://www.instructables.com/id/Give-an-old-car-a-new-life-50-paint-job-color-c/
$70 paint job (color change from silver to black) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJ6/2N32/GHTLRDHR/FJ62N32GHTLRDHR.SQUARE2.jpg http://img.instructables.com/files/deriv/FJ6/2N32/GHTLRDHR/FJ62N32GHTLRDHR.SQUARE.jpg http://img.instructables.com/files/deriv/FJ6/2N32/GHTLRDHR/FJ62N32GHTLRDHR.SMALL.jpg E5MSIBEGHTLUQB5 Nelson_Yepez One of the coolest projects I have seen here is the $70 dollar paint job.This method uses Rustoleum as a substitute for expensive car paint thats why is so cheap. Who does not want to get a really nice car to be an incredible car just for $70, right? Well also the number one question everybody has i...
By: Nelson_Yepez

Continue Reading »]]> workshop Sun, 19 Dec 2010 23:12:38 PST http://www.instructables.com/id/Build-a-Chaise-Frame-from-Scratch/
Build a Chaise Frame from Scratch - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3A/BDLH/GHUDKNOS/F3ABDLHGHUDKNOS.SQUARE2.jpg http://img.instructables.com/files/deriv/F3A/BDLH/GHUDKNOS/F3ABDLHGHUDKNOS.SQUARE.jpg http://img.instructables.com/files/deriv/F3A/BDLH/GHUDKNOS/F3ABDLHGHUDKNOS.SMALL.jpg ETMNN8RGHUDKNND duo8144 Disclaimer: This is the first sofa that I have ever built and have attempted to upholster. I am not a professional. I have done a lot of research and have built what I believe to be a quality piece of furniture. I hope this instructable inspires you to attempt your own build. *** Update 01/02/2011 ...
By: duo8144

Continue Reading »]]> workshop Sun, 19 Dec 2010 23:57:40 PST http://www.instructables.com/id/End-Grain-Cutting-Board-plus-Bonus-Project/
End Grain Cutting Board plus Bonus - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FDJ/0CXZ/GI0TLKR0/FDJ0CXZGI0TLKR0.SQUARE2.jpg http://img.instructables.com/files/deriv/FDJ/0CXZ/GI0TLKR0/FDJ0CXZGI0TLKR0.SQUARE.jpg http://img.instructables.com/files/deriv/FDJ/0CXZ/GI0TLKR0/FDJ0CXZGI0TLKR0.SMALL.jpg E2QO3IXGHUDKFS0 Greasetattoo Introduction Hello Everyone, First, I would like to thank you for viewing my instructable. And, if you enjoyed it, please give me a vote! Thanks.... I needed a $30 gift for my family gift exchange at our 2010 Christmas gathering. I was reading through my Wood magazines and came across a wood end ...
By: Greasetattoo

Continue Reading »]]> workshop Sun, 19 Dec 2010 22:47:41 PST http://www.instructables.com/id/Antiqued-Media-Stand-from-one-sheet-of-plywood/
Antiqued Media Stand from one sheet of plywood - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2G/FSJB/GHYKXSLO/F2GFSJBGHYKXSLO.SQUARE2.jpg http://img.instructables.com/files/deriv/F2G/FSJB/GHYKXSLO/F2GFSJBGHYKXSLO.SQUARE.jpg http://img.instructables.com/files/deriv/F2G/FSJB/GHYKXSLO/F2GFSJBGHYKXSLO.SMALL.jpg ELZJVF1GHTLR9S4 seamster This was made as a Christmas gift for my wife. We had traded some things with a brother of mine for a used plasma TV, but needed a nice media stand for it to sit on. I told my wife to pick any design she liked, and I would do my best to create one like it for a fraction of the cost. She looked at e...
By: seamster

Continue Reading »]]> workshop Sun, 19 Dec 2010 23:55:10 PST http://www.instructables.com/id/DIY-Plug-In-Hybrid-Car/
DIY Plug-In Hybrid Car - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBV/TX2Z/GHUDKNYZ/FBVTX2ZGHUDKNYZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FBV/TX2Z/GHUDKNYZ/FBVTX2ZGHUDKNYZ.SQUARE.jpg http://img.instructables.com/files/deriv/FBV/TX2Z/GHUDKNYZ/FBVTX2ZGHUDKNYZ.SMALL.jpg EU5RM17GHUDKICI bennelson This Instructable shows how I built a Plug-In Hybrid Vehicle. A plug-in hybrid is a car which can run off a combination of electricity (stored in batteries) charged from a wall outlet, and some other fuel, such as gasoline. This vehicle uses ONLY the battery-electric system to start with, and has ...
By: bennelson

Continue Reading »]]> workshop Sun, 19 Dec 2010 22:40:47 PST http://www.instructables.com/id/Make-a-Hardwood-Floor-that-looks-3D-from-your-OWN-/
Make a Hardwood Floor that looks 3D from your OWN Trees - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMU/7ZZD/GHUDKE47/FMU7ZZDGHUDKE47.SQUARE2.jpg http://img.instructables.com/files/deriv/FMU/7ZZD/GHUDKE47/FMU7ZZDGHUDKE47.SQUARE.jpg http://img.instructables.com/files/deriv/FMU/7ZZD/GHUDKE47/FMU7ZZDGHUDKE47.SMALL.jpg EDWWK2SGHSYTHNA Vyger    I have cut a lot of logs over the years and I have always been impressed at how beautiful some of the wood looks inside. I always wondered if there wasn't something I could do with it besides burn it for firewood. But how can you make anything from trees without the large scale professional tools...
By: Vyger

Continue Reading »]]> workshop Sun, 19 Dec 2010 20:09:46 PST http://www.instructables.com/id/32-Sedan-soapbox-1/ http://img.instructables.com/files/deriv/FBF/F33W/GHUDKH0E/FBFF33WGHUDKH0E.SQUARE2.jpg http://img.instructables.com/files/deriv/FBF/F33W/GHUDKH0E/FBFF33WGHUDKH0E.SQUARE.jpg http://img.instructables.com/files/deriv/FBF/F33W/GHUDKH0E/FBFF33WGHUDKH0E.SMALL.jpg ELCUDZMGHUDKH07 Peter Vivian I built this soapbox to compete in the 2010 'Hotrod Hayride' soapbox derby where we were beaten in the semi-final and later in the same year at Goodwood where we only made it to the quarter finals but won the trophy for best cart and also for most money raised for charity.  It is built from Walnut, ...
By: Peter Vivian

Continue Reading »]]> workshop Sun, 19 Dec 2010 12:34:02 PST http://www.instructables.com/id/Smart-Solar-Oven-Platform/
Smart Solar Oven Platform - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBC/X0VU/GIJG2B4L/FBCX0VUGIJG2B4L.SQUARE2.jpg http://img.instructables.com/files/deriv/FBC/X0VU/GIJG2B4L/FBCX0VUGIJG2B4L.SQUARE.jpg http://img.instructables.com/files/deriv/FBC/X0VU/GIJG2B4L/FBCX0VUGIJG2B4L.SMALL.jpg E9ADPHVGFPQR0Y6 dlginstructables I have been using solar ovens for a number of years. I love to cook food with the Sun's energy, and, more often than not, the food tastes really good.  I decided to do this project because I want to use the oven more than just on weekends, when I'm around to tend it. I know that people who do solar ...
By: dlginstructables

Continue Reading »]]> workshop Sat, 18 Dec 2010 22:13:17 PST http://www.instructables.com/id/TARDIS-bookcase-cupboard-Goodhart-Maker-Den-of-/
TARDIS bookcase cupboard - Goodhart Maker Den of Unequity Storage Cabinet - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F06/66D7/GHZ71W79/F0666D7GHZ71W79.SQUARE2.jpg http://img.instructables.com/files/deriv/F06/66D7/GHZ71W79/F0666D7GHZ71W79.SQUARE.jpg http://img.instructables.com/files/deriv/F06/66D7/GHZ71W79/F0666D7GHZ71W79.SMALL.jpg E86YL6SGHTLUJRN caitlinsdad My nephews are hooked on Dr. Who, the long-running British sci-fi series which seems to have a cult following. Their house is overrun with Dalek toys and models. Me, I have my Captain Kirk Chair and Stargate gong. There also seems to be a culture of building a TARDIS. It is afterall, from the outsi...
By: caitlinsdad

Continue Reading »]]> workshop Sun, 19 Dec 2010 00:09:14 PST http://www.instructables.com/id/Retrofit-of-a-vintage-Craftsman-tool/
Retrofit of a vintage Craftsman drill guide (update) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYG/4SZ4/GJHVGH6T/FYG4SZ4GJHVGH6T.SQUARE2.jpg http://img.instructables.com/files/deriv/FYG/4SZ4/GJHVGH6T/FYG4SZ4GJHVGH6T.SQUARE.jpg http://img.instructables.com/files/deriv/FYG/4SZ4/GJHVGH6T/FYG4SZ4GJHVGH6T.SMALL.jpg ELEJR3SGHFJXVQ2 thomas the metal man I needed a machine that would give me the ability to make a specialized part for my motorized bike project. The part connects a 5/16" x 24 thread output stud to a 3/8" dia. driveshaft. It couldn't be found anywhere, so I needed to make it. I just happened to have an old craftsman tool with the right...
By: thomas the metal man

Continue Reading »]]> workshop Sat, 18 Dec 2010 16:36:25 PST http://www.instructables.com/id/Garden-Arbor/
Garden Arbor - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUX/B2W6/GHFK879Q/FUXB2W6GHFK879Q.SQUARE2.jpg http://img.instructables.com/files/deriv/FUX/B2W6/GHFK879Q/FUXB2W6GHFK879Q.SQUARE.jpg http://img.instructables.com/files/deriv/FUX/B2W6/GHFK879Q/FUXB2W6GHFK879Q.SMALL.jpg EP33E6AGHRSTI5P macarch My Dad is a gardener.  More specifically, he grows roses.  Needless to say, he is outside a bunch.  When he wasn't in the flower beds tending his roses, he was was sitting underneath the large arbor in his backyard.  This under-engineered arbor supported four enormous Lady Banks Roses.  This October...
By: macarch

Continue Reading »]]> workshop Thu, 16 Dec 2010 22:29:13 PST http://www.instructables.com/id/12-Storage-Tote-Shelving-System-5000/
12 Storage Tote Shelving System $50.00 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLF/HGKL/GHFK80QX/FLFHGKLGHFK80QX.SQUARE2.jpg http://img.instructables.com/files/deriv/FLF/HGKL/GHFK80QX/FLFHGKLGHFK80QX.SQUARE.jpg http://img.instructables.com/files/deriv/FLF/HGKL/GHFK80QX/FLFHGKLGHFK80QX.SMALL.jpg ESJXKL0GHFK80IV TabbyDeAnne Hello all! Today I wanted to share with you how I made my storage bin shelving system for my garage. It holds 12 totes! Here is a short story why I made this instead of purchasing one. I have over 40 totes in my garage. I needed a sturdy shelving system to organize them so I could still get to one ...
By: TabbyDeAnne

Continue Reading »]]> workshop Tue, 14 Dec 2010 12:57:59 PST http://www.instructables.com/id/bent-wood-hand-shaped-bowl/
bent wood hand-shaped bowl - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SQUARE.jpg http://img.instructables.com/files/deriv/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SMALL.jpg EWXQQAKGGMMIUSI mikeasaurus Give yourself a helping hand, with some hand-shaped bowls. Made for keeping your everyday carrying things in one place when you're at home; dump your keys, phone, coins and other sundries into a pair of open hands to keep them safe. Place this hands near your front door or coffee table you're sure t...
By: mikeasaurus

Continue Reading »]]> workshop Tue, 14 Dec 2010 10:39:44 PST http://www.instructables.com/id/Homemade-Medieval-Letter-Opener/
Homemade Medieval Letter Opener - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5M/I3O0/GHI9CR1G/F5MI3O0GHI9CR1G.SQUARE2.jpg http://img.instructables.com/files/deriv/F5M/I3O0/GHI9CR1G/F5MI3O0GHI9CR1G.SQUARE.jpg http://img.instructables.com/files/deriv/F5M/I3O0/GHI9CR1G/F5MI3O0GHI9CR1G.SMALL.jpg E2I03CJGHHILN5T cyprian916 This Instructible will take you through the steps and techniques necessary to make your very own medieval letter opener out of some wood, leather, wire and yes ... a bolt. and this will make a great Christmas gift to a medieval enthusiast or a gift for a great Dad for his desk. (who I'm making it f...
By: cyprian916

Continue Reading »]]> workshop Tue, 14 Dec 2010 01:19:11 PST http://www.instructables.com/id/How-to-Pack-Shipping-Big-Science/
How to Pack: Shipping Big Science - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2H/S2W5/GHFK7Z14/F2HS2W5GHFK7Z14.SQUARE2.jpg http://img.instructables.com/files/deriv/F2H/S2W5/GHFK7Z14/F2HS2W5GHFK7Z14.SQUARE.jpg http://img.instructables.com/files/deriv/F2H/S2W5/GHFK7Z14/F2HS2W5GHFK7Z14.SMALL.jpg EC4VRNPGHFJXMHY stasterisk So, say you have a $20 million dollar science experiment, and you need to ship it to somewhere like Antarctica.  How do you do it??? The KECK2/BICEP radio telescope project here, at Harvard, needed to do just that, and hired the American Repertory Theater crew to do the packing. You can tell immed...
By: stasterisk

Continue Reading »]]> workshop Mon, 13 Dec 2010 21:55:38 PST http://www.instructables.com/id/Building-a-Cob-Wood-Shed/
Building a Cob Wood Shed - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2Z/E1RJ/GHHILQVB/F2ZE1RJGHHILQVB.SQUARE2.jpg http://img.instructables.com/files/deriv/F2Z/E1RJ/GHHILQVB/F2ZE1RJGHHILQVB.SQUARE.jpg http://img.instructables.com/files/deriv/F2Z/E1RJ/GHHILQVB/F2ZE1RJGHHILQVB.SMALL.jpg EPE20WTGHHILQUF raduazo To build a cob wood shed you will a supply of clay rich soil and some form of fiber reinforcement.        The soil I dig up from my back yard and for fiber I use either shredded wood fibers that I get free from a local tree service or I buy a bail of straw and use my lawn mower to chop the straw. Th...
By: raduazo

Continue Reading »]]> workshop Mon, 13 Dec 2010 10:36:24 PST http://www.instructables.com/id/New-York-Construction-Worker/
New York Construction Worker - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOU/6EP9/GHN8DAXE/FOU6EP9GHN8DAXE.SQUARE2.jpg http://img.instructables.com/files/deriv/FOU/6EP9/GHN8DAXE/FOU6EP9GHN8DAXE.SQUARE.jpg http://img.instructables.com/files/deriv/FOU/6EP9/GHN8DAXE/FOU6EP9GHN8DAXE.SMALL.jpg E2IYB5QGHN8DATE keith newstead Last year I was asked to make an automata for a cruise liner on the theme of 'New York'. It had to be hand operated and funny. I remembered an old black and white photo I had once seen of construction workers taking their lunch break whilst sitting on a steel girder hundreds of feet above New York. ...
By: keith newstead

Continue Reading »]]> workshop Mon, 13 Dec 2010 12:36:58 PST http://www.instructables.com/id/How-to-build-an-Awesome-Sidewalk-with-recycled-lum/
How to build an Awesome Sidewalk with recycled lumber for only $50.00 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FH9/IHJG/GHI9CNFE/FH9IHJGGHI9CNFE.SQUARE2.jpg http://img.instructables.com/files/deriv/FH9/IHJG/GHI9CNFE/FH9IHJGGHI9CNFE.SQUARE.jpg http://img.instructables.com/files/deriv/FH9/IHJG/GHI9CNFE/FH9IHJGGHI9CNFE.SMALL.jpg E8JSEIFGHI9CN8K Vyger         After reading that title you might wonder, why would anyone make a sidewalk out of wood? Well, there are a few very good reasons for doing it.   A little history       More than 25 years ago my wood sidewalk started out as an experiment to see how practical it might be. We needed some k...
By: Vyger

Continue Reading »]]> workshop Sun, 12 Dec 2010 16:47:02 PST http://www.instructables.com/id/Lawnmower-Power-Generator-With-A-Twist/
Lawnmower Power Generator With A Twist - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL6/5BPE/GHI9CLRJ/FL65BPEGHI9CLRJ.SQUARE2.jpg http://img.instructables.com/files/deriv/FL6/5BPE/GHI9CLRJ/FL65BPEGHI9CLRJ.SQUARE.jpg http://img.instructables.com/files/deriv/FL6/5BPE/GHI9CLRJ/FL65BPEGHI9CLRJ.SMALL.jpg EALAEKZGHI9CLPC cid2323 This is a 500 watt power generator big enough to power tools, and home electronics.  If you try plugging in kitchen appliances, heaters, window AC units etc....it will shut down, you need a 2k-3k watt power converter for large power comsumption appliances..  It's not difficult to build this pro...
By: cid2323

Continue Reading »]]> workshop Sun, 12 Dec 2010 15:04:03 PST http://www.instructables.com/id/tool-belt/
tool belt - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCI/10PA/GH8AGK8X/FCI10PAGH8AGK8X.SQUARE2.jpg http://img.instructables.com/files/deriv/FCI/10PA/GH8AGK8X/FCI10PAGH8AGK8X.SQUARE.jpg http://img.instructables.com/files/deriv/FCI/10PA/GH8AGK8X/FCI10PAGH8AGK8X.SMALL.jpg EBIA6I0GH8AGJK7 mikeasaurus Tool belts are typically worn by people working in the field who need a place to keep their tools easily accessible in case they need them. Tool belts come in all shapes and sizes depending on what you're doing, and are a handy place to keep tools which are commonly used when working. This project i...
By: mikeasaurus

Continue Reading »]]> workshop Sun, 5 Dec 2010 20:19:29 PST http://www.instructables.com/id/Sanding-Hook-Jig-for-Sanding-Small-Parts/
Jig for Sanding Small Parts - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FN1/JPVR/GGPF3R61/FN1JPVRGGPF3R61.SQUARE2.jpg http://img.instructables.com/files/deriv/FN1/JPVR/GGPF3R61/FN1JPVRGGPF3R61.SQUARE.jpg http://img.instructables.com/files/deriv/FN1/JPVR/GGPF3R61/FN1JPVRGGPF3R61.SMALL.jpg EQDR323GGPFBH60 benjamenjohnson A sanding block can make the process of sanding a whole lot easier, but what about sanding small objects that are too small for a sanding block?  Rather then trying to move the sand paper over the object, it's sometimes easier to move the object against a piece of sandpaper.  One problem with this t...
By: benjamenjohnson

Continue Reading »]]> workshop Fri, 3 Dec 2010 15:27:00 PST http://www.instructables.com/id/Solar-recharged-LED-room-light/
Solar recharged LED room light - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNM/O3SX/GGPF3O7N/FNMO3SXGGPF3O7N.SQUARE2.jpg http://img.instructables.com/files/deriv/FNM/O3SX/GGPF3O7N/FNMO3SXGGPF3O7N.SQUARE.jpg http://img.instructables.com/files/deriv/FNM/O3SX/GGPF3O7N/FNMO3SXGGPF3O7N.SMALL.jpg EXGOIZ2GGPEXWVT middlenamefrank I was inspired for this project by the new, brighter solar-charged landscaping lights that are available these days. They actually put out enough light to illuminate a pathway after dark, so I wondered why I couldn't do the same thing for indoor use? Most evenings I'm either watching TV or a movie,...
By: middlenamefrank

Continue Reading »]]> workshop Tue, 23 Nov 2010 16:01:22 PST http://www.instructables.com/id/SiteSpecific-a-guerilla-memorabilia-Amsterdam/
SiteSpecific - a guerilla memorabilia / Amsterdam - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZO/YTXB/GHFK777T/FZOYTXBGHFK777T.SQUARE2.jpg http://img.instructables.com/files/deriv/FZO/YTXB/GHFK777T/FZOYTXBGHFK777T.SQUARE.jpg http://img.instructables.com/files/deriv/FZO/YTXB/GHFK777T/FZOYTXBGHFK777T.SMALL.jpg EEFILROGHDS6SV5 saronpaz when we travel for a vacation or seeking new adventures in far away places, we tend to pick up souvenirs to 'preserve the moment'. but since most souvenirs are probably made in china and digital photos of almost every spot on earth are available online for all, how can you actually prove you have be...
By: saronpaz

Continue Reading »]]> workshop Wed, 8 Dec 2010 05:37:34 PST http://www.instructables.com/id/Radial-Arm-Saw-Overhaul-Modification-for-Low-Pro/
Radial-Arm Saw Overhaul & Modification for Low Profile Storage - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRF/2GYT/GH8XYOEO/FRF2GYTGH8XYOEO.SQUARE2.jpg http://img.instructables.com/files/deriv/FRF/2GYT/GH8XYOEO/FRF2GYTGH8XYOEO.SQUARE.jpg http://img.instructables.com/files/deriv/FRF/2GYT/GH8XYOEO/FRF2GYTGH8XYOEO.SMALL.jpg E5BRBG1GH8AAO92 neffk This instructable is about how to overhaul/re-build a Craftsman radial arm saw.  I also included instructions for some modifications I made so that it can be stored compactly against the wall of my 1-car garage. My father recently gave me his old radial arm saw.  It had been sitting in his garage,...
By: neffk

Continue Reading »]]> workshop Tue, 7 Dec 2010 00:39:13 PST http://www.instructables.com/id/Air-Powered-Star-Trek-Style-Door/
Air-Powered Star Trek Style Door - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FE9/BUDU/GHDS6MU4/FE9BUDUGHDS6MU4.SQUARE2.jpg http://img.instructables.com/files/deriv/FE9/BUDU/GHDS6MU4/FE9BUDUGHDS6MU4.SQUARE.jpg http://img.instructables.com/files/deriv/FE9/BUDU/GHDS6MU4/FE9BUDUGHDS6MU4.SMALL.jpg EM031Y6GH8A05TC uiproductions I always wanted a piece of Star Trek and the Disney Monorail in my house, and one thing they have in common is that they both have automatic sliding doors. It would be the perfect, most geek-ified entryway for my bedroom. Edit:  Not every detail is included in this Instructable.  I did th...
By: uiproductions

Continue Reading »]]> workshop Mon, 6 Dec 2010 12:08:58 PST http://www.instructables.com/id/Dry-Erase-Decision-Wheel/
Dry Erase Decision Wheel - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F32/4JWF/GH6IFIDS/F324JWFGH6IFIDS.SQUARE2.jpg http://img.instructables.com/files/deriv/F32/4JWF/GH6IFIDS/F324JWFGH6IFIDS.SQUARE.jpg http://img.instructables.com/files/deriv/F32/4JWF/GH6IFIDS/F324JWFGH6IFIDS.SMALL.jpg E72W888GH4AK00U guyzo35 My friend is extremely indecisive, almost to the point of it being a disorder, so for her 21st birthday I built her this one-of-a-kind gift, (I did a great deal of research to authenticate its originality). The user divides the surface into sections with the marker, writes choices in those sections...
By: guyzo35

Continue Reading »]]> workshop Mon, 6 Dec 2010 08:02:45 PST http://www.instructables.com/id/Mini-Tablesaw-Router-Shaper-for-Dremel-rotary-/
Mini-Tablesaw / Router / Shaper for Dremel rotary tool - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FL0/UI6O/GH8AB1EH/FL0UI6OGH8AB1EH.SQUARE2.jpg http://img.instructables.com/files/deriv/FL0/UI6O/GH8AB1EH/FL0UI6OGH8AB1EH.SQUARE.jpg http://img.instructables.com/files/deriv/FL0/UI6O/GH8AB1EH/FL0UI6OGH8AB1EH.SMALL.jpg E4212Q5GH8AAVYY sdudley Mini - Table Saw / Router / Shaper for Dremel rotary tool. Now that the Dremel contest voting is over I guess it's ok to update this instructable. Here is a "supplement" video showing the table saw extension in action. :) Get templates here! I am attaching a PDF that includes the t...
By: sdudley

Continue Reading »]]> workshop Sun, 5 Dec 2010 20:47:16 PST http://www.instructables.com/id/Convex-Glass-Tile-from-Bottles/
Convex Glass Tile from Bottles - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FI5/G45V/G43E4KC0/FI5G45VG43E4KC0.SQUARE2.jpg http://img.instructables.com/files/deriv/FI5/G45V/G43E4KC0/FI5G45VG43E4KC0.SQUARE.jpg http://img.instructables.com/files/deriv/FI5/G45V/G43E4KC0/FI5G45VG43E4KC0.SMALL.jpg EKO6MR6G47KOJZ4 asdterror Jig? Yes Please! There are really good bottle cutting jigs out there, but I loath to purchase, store, and ultimately yard-sale a specialized tool.  So here is the simple, flexible, and repeatable setup I use to cut glass cylinders: Cut the Long Cuts Time to cut along the infinite planes of t...
By: asdterror

Continue Reading »]]> workshop Sat, 9 Jan 2010 20:27:42 PST http://www.instructables.com/id/Automaton-driving-leds-and-an-office-employee/ http://img.instructables.com/files/deriv/F1A/HATU/GH8AGHSJ/F1AHATUGH8AGHSJ.SQUARE2.jpg http://img.instructables.com/files/deriv/F1A/HATU/GH8AGHSJ/F1AHATUGH8AGHSJ.SQUARE.jpg http://img.instructables.com/files/deriv/F1A/HATU/GH8AGHSJ/F1AHATUGH8AGHSJ.SMALL.jpg ERT2064GH8AGHOK ynze I made my first "automata" in the last couple of weeks. Because it was my first try to make something like this, I needed all my attention to the making, not leaving any space for documenting the process. So, I ended up with a working automaton, but not enough material to make an Instructable of. H...
By: ynze

Continue Reading »]]> workshop Sun, 5 Dec 2010 11:24:55 PST http://www.instructables.com/id/Scroll-Sawed-Wooden-Bowls/
Scroll Sawed Wooden Bowls! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F7O/4WQ9/GH8AASIT/F7O4WQ9GH8AASIT.SQUARE2.jpg http://img.instructables.com/files/deriv/F7O/4WQ9/GH8AASIT/F7O4WQ9GH8AASIT.SQUARE.jpg http://img.instructables.com/files/deriv/F7O/4WQ9/GH8AASIT/F7O4WQ9GH8AASIT.SMALL.jpg ESMKSTOGHADGFYK LMO Hey everybody! I was disappointed recently to find that there are no instructables on making wooden bowls with a scroll saw, even though there are lots of books published on the subject.  So I've decided to fill the gap. All you'll need is a scroll saw and a few other tools to get started.  I like...
By: LMO

Continue Reading »]]> workshop Sat, 4 Dec 2010 16:12:21 PST http://www.instructables.com/id/Table-belt-sander-lijadora-de-banda-de-mesa/
Table belt sander (lijadora de banda, de mesa) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FC1/W65Z/GH8AAOA7/FC1W65ZGH8AAOA7.SQUARE2.jpg http://img.instructables.com/files/deriv/FC1/W65Z/GH8AAOA7/FC1W65ZGH8AAOA7.SQUARE.jpg http://img.instructables.com/files/deriv/FC1/W65Z/GH8AAOA7/FC1W65ZGH8AAOA7.SMALL.jpg EI19FZ7GH8AG9QT rimar2000 Hace unos meses me regalé una lijadora de banda. Es una excelente herramienta, versátil, resistente, poderosa. Pero... siempre tiene que existir un "pero". Para trabajos pequeños es algo difícil de manejar. Por ejemplo, para lijar piezas chicas, suelo ponerla "patas para arriba" sobre las piernas y ...
By: rimar2000

Continue Reading »]]> workshop Fri, 3 Dec 2010 20:39:05 PST http://www.instructables.com/id/DIY-Solar-Powered-radio-for-%245/
DIY Solar Powered radio for $5 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFC/AC7T/F4E8646S/FFCAC7TF4E8646S.SQUARE2.jpg http://img.instructables.com/files/deriv/FFC/AC7T/F4E8646S/FFCAC7TF4E8646S.SQUARE.jpg http://img.instructables.com/files/deriv/FFC/AC7T/F4E8646S/FFCAC7TF4E8646S.SMALL.jpg EUJQKJ6F4E863QW gotwind This is another good use for the solar panel used on the huge amounts of garden LED lights around, coupled to a portable radio that runs off 2 or 3 AA cells. Most of us have an old radio lying around, so I based the $5 price on the cost of purchasing/ acquiring a solar powered garden L.E.D light. ...
By: gotwind

Continue Reading »]]> workshop Sat, 21 Jul 2007 16:01:23 PDT http://www.instructables.com/id/Cut-a-Royal-Seal/
Cut a Royal Seal - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FD9/N3P9/GH8AGA7D/FD9N3P9GH8AGA7D.SQUARE2.jpg http://img.instructables.com/files/deriv/FD9/N3P9/GH8AGA7D/FD9N3P9GH8AGA7D.SQUARE.jpg http://img.instructables.com/files/deriv/FD9/N3P9/GH8AGA7D/FD9N3P9GH8AGA7D.SMALL.jpg E32Z3FLGF7B8NTX JamesRPatrick If you ever need to send a letter, adding a wax seal is the undoubtedly the best way to show class. Cutting a seal is a simple but laborious task, and the finished product is very rewarding. A seal made of the proper material will last generations. Tools and Materials Tools: -metal lathe(optiona...
By: JamesRPatrick

Continue Reading »]]> workshop Fri, 3 Dec 2010 20:22:17 PST http://www.instructables.com/id/Super-Toilet-Plunger/
Super Toilet Plunger - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FV0/C2YG/GH4NN8WM/FV0C2YGGH4NN8WM.SQUARE2.jpg http://img.instructables.com/files/deriv/FV0/C2YG/GH4NN8WM/FV0C2YGGH4NN8WM.SQUARE.jpg http://img.instructables.com/files/deriv/FV0/C2YG/GH4NN8WM/FV0C2YGGH4NN8WM.SMALL.jpg EYTMOT2GGPF3XQK CrLz Toilet plungers are cheaply designed.  Plunger handles inhibit use.  Why?   Worst time to discover design faults is during a crisis- when you need a toilet plunger! Design problems Too short- must bend over to use.  Strains the back and reduces use of body weight to drive the plunger. Wri...
By: CrLz

Continue Reading »]]> workshop Fri, 3 Dec 2010 12:37:21 PST http://www.instructables.com/id/Recycling-Old-timbers-reciclando-maderas-viejas/
Recycling Old timbers (reciclando maderas viejas) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FGW/D2AZ/GH89ZQBI/FGWD2AZGH89ZQBI.SQUARE2.jpg http://img.instructables.com/files/deriv/FGW/D2AZ/GH89ZQBI/FGWD2AZGH89ZQBI.SQUARE.jpg http://img.instructables.com/files/deriv/FGW/D2AZ/GH89ZQBI/FGWD2AZGH89ZQBI.SMALL.jpg EOEH6NLGH8AG5Q2 rimar2000 Please, help me correct the English translation Hace dos años, más o menos, debido a una vieja gotera, me vi obligado a reemplazar el machimbre del techo del garage. Como resultado obtuve algunas decenas de maderas de pino en buen estado, de 1 cm de espesor por 9 de ancho, y de largo variable. En c...
By: rimar2000

Continue Reading »]]> workshop Fri, 3 Dec 2010 10:59:32 PST http://www.instructables.com/id/LED-Motorcycle-Headlight/
LED Motorcycle Headlight - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FI5/LDY6/FOVXOVU2/FI5LDY6FOVXOVU2.SQUARE2.jpg http://img.instructables.com/files/deriv/FI5/LDY6/FOVXOVU2/FI5LDY6FOVXOVU2.SQUARE.jpg http://img.instructables.com/files/deriv/FI5/LDY6/FOVXOVU2/FI5LDY6FOVXOVU2.SMALL.jpg EZC5F25FOVXOVTW CaptainSlug In order to reduce the power consumption of the lighting system of my electric vehicle, I took it upon myself to change all of the lighting to LEDs. When it came to replacing the incandescent 18 watt 310 lumen headlight bulb, none of the drop-in LED replacement bulbs looked good to me. Also none of ...
By: CaptainSlug

Continue Reading »]]> workshop Tue, 23 Dec 2008 09:14:35 PST http://www.instructables.com/id/The-Gem-Cave-Workshop/ http://img.instructables.com/files/deriv/FAA/1GJF/FORZTFKQ/FAA1GJFFORZTFKQ.SQUARE2.jpg http://img.instructables.com/files/deriv/FAA/1GJF/FORZTFKQ/FAA1GJFFORZTFKQ.SQUARE.jpg http://img.instructables.com/files/deriv/FAA/1GJF/FORZTFKQ/FAA1GJFFORZTFKQ.SMALL.jpg EBSPVNQFORZTFKF alinke Building the workshop was the easy part, the hard part was convincing the wife to give up what was previously basement storage. After some negotiation, I set off to build my workshop. The inspiration for the gem cave theme came from the gem mines in Snow White and the Seven Dwarfs.The original wall ...
By: alinke

Continue Reading »]]> workshop Tue, 16 Dec 2008 02:10:09 PST http://www.instructables.com/id/Installing-Kitchen-Cabinet-Door-Handles/
Installing Kitchen Cabinet Door Handles - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0J/FFNN/GH4A6738/F0JFFNNGH4A6738.SQUARE2.jpg http://img.instructables.com/files/deriv/F0J/FFNN/GH4A6738/F0JFFNNGH4A6738.SQUARE.jpg http://img.instructables.com/files/deriv/F0J/FFNN/GH4A6738/F0JFFNNGH4A6738.SMALL.jpg EJJ6INYGH6IFHZX angelabchua My boyfriend and I spent weeks remodeling our kitchen.  After countless hours scraping paint, sanding wood, primering and painting doors, and staining cabinets, we finally got to the last part to complete our kitchen.... installing the final hardware bits!  I was adamant that the handles be even an...
By: angelabchua

Continue Reading »]]> workshop Wed, 1 Dec 2010 15:02:25 PST http://www.instructables.com/id/Rainwater-collection-amp-distribution-system/
Rainwater collection & distribution system - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWK/FFRL/FU6LTFWR/FWKFFRLFU6LTFWR.SQUARE2.jpg http://img.instructables.com/files/deriv/FWK/FFRL/FU6LTFWR/FWKFFRLFU6LTFWR.SQUARE.jpg http://img.instructables.com/files/deriv/FWK/FFRL/FU6LTFWR/FWKFFRLFU6LTFWR.SMALL.jpg EWJXL7YFU6LTFKW mark11photography This is a custom system I designed to collect the rainwater coming off my roof and have both the ability to store the water and distribute it without attaching any temporary piping. My apologies in advance that I don't have pictures showing the step by step construction - I only discovered this site...
By: mark11photography

Continue Reading »]]> workshop Sat, 2 May 2009 19:44:45 PDT http://www.instructables.com/id/Convection-powered-counter-rotating-kinetic-sculpt/
Convection powered, counter rotating, kinetic sculpture - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FU9/V3CC/GGPFCCKN/FU9V3CCGGPFCCKN.SQUARE2.jpg http://img.instructables.com/files/deriv/FU9/V3CC/GGPFCCKN/FU9V3CCGGPFCCKN.SQUARE.jpg http://img.instructables.com/files/deriv/FU9/V3CC/GGPFCCKN/FU9V3CCGGPFCCKN.SMALL.jpg ENES5YNGGPFCCJD PDRWLSN Powered by Sterno made of wood, sounds like a recipe for fire. It took two cans of heat to get it moving the first time but continued to spin almost as fast after removing one can. It serves no purpose yet but tomorow I'm going to add a pot- pouri jar just under the rotor blades to give it  reason f...
By: PDRWLSN

Continue Reading »]]> workshop Sun, 28 Nov 2010 23:47:51 PST http://www.instructables.com/id/The-Princess-Playhouse/
The Princess Playhouse - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNG/NAR7/FPIOLA6W/FNGNAR7FPIOLA6W.SQUARE2.jpg http://img.instructables.com/files/deriv/FNG/NAR7/FPIOLA6W/FNGNAR7FPIOLA6W.SQUARE.jpg http://img.instructables.com/files/deriv/FNG/NAR7/FPIOLA6W/FNGNAR7FPIOLA6W.SMALL.jpg EHHJ22NFPBKZ0CC alinke A Princess Playhouse for my two girls. It features: An Interactive Magic Mirror (See Separate DIY Magic Mirror Instructable)Vintage Light FixturesStained Glass WindowsA Built-in BookshelfRecessed TVSound SystemIn-Ceiling SpeakersNetworkPhoneFaux FireplaceDoorbellPicture Rail MoldingCeiling VentGutte...
By: alinke

Continue Reading »]]> workshop Sun, 4 Jan 2009 15:11:58 PST http://www.instructables.com/id/Portable-Wood-Fired-Pizza-OvenPatio-Heater/
Portable Wood Fired Pizza Oven/Patio Heater - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1Y/0H74/GFRWPMER/F1Y0H74GFRWPMER.SQUARE2.jpg http://img.instructables.com/files/deriv/F1Y/0H74/GFRWPMER/F1Y0H74GFRWPMER.SQUARE.jpg http://img.instructables.com/files/deriv/F1Y/0H74/GFRWPMER/F1Y0H74GFRWPMER.SMALL.jpg E5VRGNOGFRWQO00 andrew.spencer.2 Although there are already many instructables on the topic of stoves made from old propane bottles, I thought I would try to come up with something a little more usefull in the cooking department. This all came about when a chunk broke off of my beloved pizza stone and I had to think of some way...
By: andrew.spencer.2

Continue Reading »]]> workshop Sun, 28 Nov 2010 19:30:58 PST http://www.instructables.com/id/Wagon-Wheel-Chandelier/
Wagon Wheel Chandelier - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4W/UQ1Y/GGPFC99G/F4WUQ1YGGPFC99G.SQUARE2.jpg http://img.instructables.com/files/deriv/F4W/UQ1Y/GGPFC99G/F4WUQ1YGGPFC99G.SQUARE.jpg http://img.instructables.com/files/deriv/F4W/UQ1Y/GGPFC99G/F4WUQ1YGGPFC99G.SMALL.jpg E0ALDX9GGPFBJAY hummer_head The idea of the chandelier came to me because in my girlfriend's yard they've made a big shelter planned to be a barbeque with a big table so the whole family can gather. But for now only the shelter part is done. It is made like in old times- wooden shelter, wall made out of stones, clay things. Al...
By: hummer_head

Continue Reading »]]> workshop Sun, 28 Nov 2010 13:59:08 PST http://www.instructables.com/id/How-to-Build-a-WorkbenchStorage-Shelf/
How to Build a Workbench/Storage Shelf - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCR/5REW/JPKEQHO9Z08/FCR5REWJPKEQHO9Z08.SQUARE2.jpg http://img.instructables.com/files/deriv/FCR/5REW/JPKEQHO9Z08/FCR5REWJPKEQHO9Z08.SQUARE.jpg http://img.instructables.com/files/deriv/FCR/5REW/JPKEQHO9Z08/FCR5REWJPKEQHO9Z08.SMALL.jpg E8K87J8ORYEQHO9ZFZ simplifiedbuilding We have been busy brainstorming ideas of how people can use Kee Klamp fittings to build a whole bunch of cool things for their homes. Tricia has started to come up with a whole line of items that can be used in the basement/garage. She has also been thinking about a whole bunch of kitchen ideas.. ...
By: simplifiedbuilding

Continue Reading »]]> workshop Fri, 11 Aug 2006 20:54:05 PDT http://www.instructables.com/id/Build-Galileos-Bicycle/
Build Galileo's Bicycle - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5J/PUUT/GGPEU2Q4/F5JPUUTGGPEU2Q4.SQUARE2.jpg http://img.instructables.com/files/deriv/F5J/PUUT/GGPEU2Q4/F5JPUUTGGPEU2Q4.SQUARE.jpg http://img.instructables.com/files/deriv/F5J/PUUT/GGPEU2Q4/F5JPUUTGGPEU2Q4.SMALL.jpg EA8AOEGGCZAQM9C jeff-o Galileo's Bicycle is a kinetic sculpture designed by Clayton Boyer. I built this one as a wedding gift for my best friend, over a period of a few months. It can surely be finished in less time than that, but when you've only got an hour or two of free time per week to devote to it, it can take a whi...
By: jeff-o

Continue Reading »]]> workshop Sat, 27 Nov 2010 23:02:45 PST http://www.instructables.com/id/Duct-Tape-Tool-Tote/
Duct Tape Tool Tote - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FPK/KANG/GGPEYBLA/FPKKANGGGPEYBLA.SQUARE2.jpg http://img.instructables.com/files/deriv/FPK/KANG/GGPEYBLA/FPKKANGGGPEYBLA.SQUARE.jpg http://img.instructables.com/files/deriv/FPK/KANG/GGPEYBLA/FPKKANGGGPEYBLA.SMALL.jpg EF446YFGGPF46QA fallental How to make a versatile and TOUGH tool tote out of items around the house. This was inspired by and AWP tool bag that I purchased last year, and some Craftsman tool bags that I have seen at hardware stores. Enjoy! Materials Needed! For this project you will only need very few items, and it should...
By: fallental

Continue Reading »]]> workshop Fri, 26 Nov 2010 11:47:13 PST http://www.instructables.com/id/Worlds-Smallest-Milling-Machine/
World's Smallest Milling Machine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FPG/ZJ0Y/GGPEY1OD/FPGZJ0YGGPEY1OD.SQUARE2.jpg http://img.instructables.com/files/deriv/FPG/ZJ0Y/GGPEY1OD/FPGZJ0YGGPEY1OD.SQUARE.jpg http://img.instructables.com/files/deriv/FPG/ZJ0Y/GGPEY1OD/FPGZJ0YGGPEY1OD.SMALL.jpg ESB1OV8GGPETI9J Technochicken I was talking to a fellow member of my school's robotics team, and we got to thinking that we should build ourselves a CNC mill to machine custom parts with.  While doing some research, I came across and Instructable called "How to make a mini milling machine- manual or CNC!."  The design of this pa...
By: Technochicken

Continue Reading »]]> workshop Wed, 24 Nov 2010 21:42:09 PST http://www.instructables.com/id/Make-a-portaband-into-an-vertical-band-saw/
Make a portaband into an vertical band saw - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3H/CI7T/GGPFBK6E/F3HCI7TGGPFBK6E.SQUARE2.jpg http://img.instructables.com/files/deriv/F3H/CI7T/GGPFBK6E/F3HCI7TGGPFBK6E.SQUARE.jpg http://img.instructables.com/files/deriv/F3H/CI7T/GGPFBK6E/F3HCI7TGGPFBK6E.SMALL.jpg EPN37ICGGPFBK62 joren A protaband is an amazing tool!  It cuts all sorts of materials (metal, platic, wood) in a much faster, cleaner, and generally more controlled way than alternative cutting tools (sawzall, jigsaw, scroll saw).  The right way to use a portaband saw is to secure what you are cutting and hold the saw as...
By: joren

Continue Reading »]]> workshop Thu, 25 Nov 2010 08:48:22 PST http://www.instructables.com/id/Skateboard-Bookshelf/
Skateboard Bookshelf - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FSF/1J95/GGL752W8/FSF1J95GGL752W8.SQUARE2.jpg http://img.instructables.com/files/deriv/FSF/1J95/GGL752W8/FSF1J95GGL752W8.SQUARE.jpg http://img.instructables.com/files/deriv/FSF/1J95/GGL752W8/FSF1J95GGL752W8.SMALL.jpg EIPDQQ6GGL752U2 frenzy The skateboard bookshelf can be made from new or old skateboard decks. With just a bit of time you can have a neat adjustable-height bookcase that will make your friends envious. Perfect for the dorm or as a holiday present for your favorite skater. Supplies for this project you will need: 2 t...
By: frenzy

Continue Reading »]]> workshop Tue, 23 Nov 2010 11:26:19 PST http://www.instructables.com/id/PVC-Inner-Tube-Chair/
PVC Inner Tube Chair - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZ1/DYH0/GGC2UVKQ/FZ1DYH0GGC2UVKQ.SQUARE2.jpg http://img.instructables.com/files/deriv/FZ1/DYH0/GGC2UVKQ/FZ1DYH0GGC2UVKQ.SQUARE.jpg http://img.instructables.com/files/deriv/FZ1/DYH0/GGC2UVKQ/FZ1DYH0GGC2UVKQ.SMALL.jpg EX0HF19GGAOZ6RH boston09 So my family and I ride bike a ton, and we are constantly having to replace out inner tubes, but for some reason we keep them. I decided to make a chair with the inner tubes, because its different. This project is a little dangerous and it may be alittle difficult, but if your willing to try somethi...
By: boston09

Continue Reading »]]> workshop Sun, 14 Nov 2010 20:25:28 PST http://www.instructables.com/id/Wooden-Centrifugal-Puzzle/
Wooden Centrifugal Puzzle - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8K/SOSC/GGPETC5H/F8KSOSCGGPETC5H.SQUARE2.jpg http://img.instructables.com/files/deriv/F8K/SOSC/GGPETC5H/F8KSOSCGGPETC5H.SQUARE.jpg http://img.instructables.com/files/deriv/F8K/SOSC/GGPETC5H/F8KSOSCGGPETC5H.SMALL.jpg E9T06BUGGPEXURZ Phil B This is a wooden puzzle.  The two parts lock together and you give it to a friend, asking him to unlock and separate the two parts.  A friend in Germany made this one.  When he handed it to me to solve, I could not until he showed me the secret.  This Instructable will not only show how the puzzle i...
By: Phil B

Continue Reading »]]> workshop Tue, 23 Nov 2010 12:26:33 PST http://www.instructables.com/id/Train-Bed/
Building a Train Bed - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3U/W5SB/GGPEXNG0/F3UW5SBGGPEXNG0.SQUARE2.jpg http://img.instructables.com/files/deriv/F3U/W5SB/GGPEXNG0/F3UW5SBGGPEXNG0.SQUARE.jpg http://img.instructables.com/files/deriv/F3U/W5SB/GGPEXNG0/F3UW5SBGGPEXNG0.SMALL.jpg EK1QJM1GGPEXMSO kevconard After looking all over the internet, I came to the conclusion that I wasn't happy with any of the train beds available. The only one I did like was super expensive. So I decided to make my own (I used a picture of the one I found on the internet to get approximate dimensions). The bed is made o...
By: kevconard

Continue Reading »]]> workshop Mon, 22 Nov 2010 11:48:59 PST http://www.instructables.com/id/PVC-Solar-Light-Holder/
PVC Solar Light Holder - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FE1/NENI/GGPFB29E/FE1NENIGGPFB29E.SQUARE2.jpg http://img.instructables.com/files/deriv/FE1/NENI/GGPFB29E/FE1NENIGGPFB29E.SQUARE.jpg http://img.instructables.com/files/deriv/FE1/NENI/GGPFB29E/FE1NENIGGPFB29E.SMALL.jpg EB6FD2VGGPFB1NT Lehmeier I recently got some solar lights and stuck them in the planter.  I planted some flower seeds and a few months later we could hardly see the solar lights.  so after a few designs i came up with this.  It puts the lights up off the ground and puts them on the wall. What You Need Supplies 3/4" PVC...
By: Lehmeier

Continue Reading »]]> workshop Sun, 21 Nov 2010 12:53:31 PST http://www.instructables.com/id/Identify-Metals/
Identify Metals - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMX/YYCU/GH89ZQFP/FMXYYCUGH89ZQFP.SQUARE2.jpg http://img.instructables.com/files/deriv/FMX/YYCU/GH89ZQFP/FMXYYCUGH89ZQFP.SQUARE.jpg http://img.instructables.com/files/deriv/FMX/YYCU/GH89ZQFP/FMXYYCUGH89ZQFP.SMALL.jpg EFFHE11GGPEXDME tranoxx      If your like me and make scrap metal sculpture then it can sometimes be hard to identify what metal the scrap is made of. In this instructable I will show you how too identify some of the more common metals. NOTE: These are not all the metals there are, there are thousands and I couldn't possib...
By: tranoxx

Continue Reading »]]> workshop Sun, 21 Nov 2010 07:15:01 PST http://www.instructables.com/id/Home-made-Sun-Jar/
Home-made Sun Jar - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4K/R1V7/VS4EUR4U6HE/F4KR1V7VS4EUR4U6HE.SQUARE2.jpg http://img.instructables.com/files/deriv/F4K/R1V7/VS4EUR4U6HE/F4KR1V7VS4EUR4U6HE.SQUARE.jpg http://img.instructables.com/files/deriv/F4K/R1V7/VS4EUR4U6HE/F4KR1V7VS4EUR4U6HE.SMALL.jpg E3UXT5HGT7EUOJJIYE cre8tor A solar-powered LED lighted cookie jar reminiscent of the Sun Jar designed by Tobias Wong."Jam jars store jam, the Sun jar collects and stores sunshine so that you can use it at night."Pass around the sunshine, Sunshine. (_)vComponents:1. Ikea glass jar (AUD$3.00)2. Solar garden light (AUD$10.00)3. ...
By: cre8tor

Continue Reading »]]> workshop Sat, 18 Nov 2006 19:44:19 PST http://www.instructables.com/id/Cardboard-Foil-Glue-The-Solar-Funnel-Cooker/
Cardboard. Foil. Glue: The Solar Funnel Cooker - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FIK/4EA7/GB3XJEV6/FIK4EA7GB3XJEV6.SQUARE2.jpg http://img.instructables.com/files/deriv/FIK/4EA7/GB3XJEV6/FIK4EA7GB3XJEV6.SQUARE.jpg http://img.instructables.com/files/deriv/FIK/4EA7/GB3XJEV6/FIK4EA7GB3XJEV6.SMALL.jpg EV2FCCQGB4CYO9B gwylan When the temperature hit 100°F this June I knew I had to avoid lighting my propane stove during the day. I have a box-style cardboard solar oven which I've used for years for granola and beans and even a pie now and again. However, it's bulky to haul out just to heat soup for lunch. Research led me ...
By: gwylan

Continue Reading »]]> workshop Mon, 5 Jul 2010 17:41:18 PDT http://www.instructables.com/id/Build-a-log-cabin-Playhouse-for-under-%24300/
Build a log cabin Playhouse for under $300 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2N/XAXI/F3NIHIOK/F2NXAXIF3NIHIOK.SQUARE2.jpg http://img.instructables.com/files/deriv/F2N/XAXI/F3NIHIOK/F2NXAXIF3NIHIOK.SQUARE.jpg http://img.instructables.com/files/deriv/F2N/XAXI/F3NIHIOK/F2NXAXIF3NIHIOK.SMALL.jpg E83LYB1F3KRXJ8U MikeO I noticed that my 3 year old Son always gravitated toward the playhouses whenever we went to a big playground. So, I put Playhouse on my list of things to get for him. Yeah well, after shopping around for a while I found that a Playhouse of any decent size was $1200 for a striped down, 4'x 6' box. ...
By: MikeO

Continue Reading »]]> workshop Sun, 1 Jul 2007 21:18:01 PDT http://www.instructables.com/id/A-Backyard-Path-that-says-Were-going-Places/
A Backyard Path that says "We're going Places" - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F56/2PXO/G68H8EYR/F562PXOG68H8EYR.SQUARE2.jpg http://img.instructables.com/files/deriv/F56/2PXO/G68H8EYR/F562PXOG68H8EYR.SQUARE.jpg http://img.instructables.com/files/deriv/F56/2PXO/G68H8EYR/F562PXOG68H8EYR.SMALL.jpg EAF0OXVG69MUHFA Pkranger88 Sometimes your backyard is just a litter box for a pet or a romping ground for a child.  Sometimes it's a place of tranquility that aids in releasing your your tensions after a long day of work.  Whatever your backyard is used for, Most people do something more with it than just let it be a mowing g...
By: Pkranger88

Continue Reading »]]> workshop Wed, 17 Nov 2010 05:59:58 PST http://www.instructables.com/id/Pop-Bottle-Cap-Antenna-Protector/
Pop-Bottle-Cap Antenna Protector - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3L/0JB1/GGL6ZPE3/F3L0JB1GGL6ZPE3.SQUARE2.jpg http://img.instructables.com/files/deriv/F3L/0JB1/GGL6ZPE3/F3L0JB1GGL6ZPE3.SQUARE.jpg http://img.instructables.com/files/deriv/F3L/0JB1/GGL6ZPE3/F3L0JB1GGL6ZPE3.SMALL.jpg EHUZ4KXGGL6ZP96 Darwinfish Power antennas are great. You can make them go up, and, well, down, and... well, they make the radio work. The radio's important so that you can listen to, uh, well, sometimes there's good music. Anyway, they're fun to watch, and I want to keep mine working. When Nissan (or whoever Nissan handed th...
By: Darwinfish

Continue Reading »]]> workshop Tue, 16 Nov 2010 19:09:32 PST http://www.instructables.com/id/Installing-Chair-Rail/
Installing Chair Rail - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FLT/QSON/GGC2UGXX/FLTQSONGGC2UGXX.SQUARE2.jpg http://img.instructables.com/files/deriv/FLT/QSON/GGC2UGXX/FLTQSONGGC2UGXX.SQUARE.jpg http://img.instructables.com/files/deriv/FLT/QSON/GGC2UGXX/FLTQSONGGC2UGXX.SMALL.jpg EEL111RGGC2USFU randofo Chair rail moulding is a great way to spruce up a room and protect its walls from wily and dangerous chair backs. If left to their own devices, chairs would dent up all of your walls and make you mad. It is therefor imperative that you keep those walls safe by placing a solid protective barrier at 3...
By: randofo

Continue Reading »]]> workshop Tue, 16 Nov 2010 12:54:55 PST http://www.instructables.com/id/Kinetic-Marble-Track-Around-The-Top-Of-A-Room/
Kinetic Marble Track Around The Top Of A Room - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4A/5TQP/GGC2UP68/F4A5TQPGGC2UP68.SQUARE2.jpg http://img.instructables.com/files/deriv/F4A/5TQP/GGC2UP68/F4A5TQPGGC2UP68.SQUARE.jpg http://img.instructables.com/files/deriv/F4A/5TQP/GGC2UP68/F4A5TQPGGC2UP68.SMALL.jpg ENZCCOLGFA436GD stevemoseley This Instructable is for building a marble track around the outside of a room. This track is built mostly from wood and uses 1-inch glass marbles.  There are two lifting devices used to bring the marbles to the top of the track and keep them moving around the room.  The lifting devices are run with...
By: stevemoseley

Continue Reading »]]> workshop Mon, 15 Nov 2010 20:21:33 PST http://www.instructables.com/id/Build-a-scale-to-weigh-bee-hives/
Build a scale to weigh bee hives - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F9A/DH9Q/GGBZIRTQ/F9ADH9QGGBZIRTQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F9A/DH9Q/GGBZIRTQ/F9ADH9QGGBZIRTQ.SQUARE.jpg http://img.instructables.com/files/deriv/F9A/DH9Q/GGBZIRTQ/F9ADH9QGGBZIRTQ.SMALL.jpg EXMHK9PGGC2UA77 trearick Portable Hive Scale The goal is to build an accurate, electronic bee hive scale for under $50 that allows anyone to weight 4 hives per minute – up to 250 lbs each – without materially disturbing the colony. ______________________________ Problem In my first year as a beekeeper, I had 2 out of 3 h...
By: trearick

Continue Reading »]]> workshop Mon, 15 Nov 2010 18:56:50 PST http://www.instructables.com/id/Improving-a-Welder-Ground-Clamp/
Improving a Welder Ground Clamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F15/1NAT/GGC2UX63/F151NATGGC2UX63.SQUARE2.jpg http://img.instructables.com/files/deriv/F15/1NAT/GGC2UX63/F151NATGGC2UX63.SQUARE.jpg http://img.instructables.com/files/deriv/F15/1NAT/GGC2UX63/F151NATGGC2UX63.SMALL.jpg EHSXL3NGGC2UDVB Phil B These stamped steel ground clamps are standard from the factory on many welders.  They work pretty well, but performance degrades in time.  I could buy a nice brass ground clamp, but would rather just improve the contact and current path on this clamp.   Fit a piece of aluminum bar stock I deci...
By: Phil B

Continue Reading »]]> workshop Mon, 15 Nov 2010 12:34:52 PST http://www.instructables.com/id/How-to-repair-a-broken-guitar-neck-headstock/
How to repair a broken guitar neck (headstock) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6W/A5CK/GGC2USP9/F6WA5CKGGC2USP9.SQUARE2.jpg http://img.instructables.com/files/deriv/F6W/A5CK/GGC2USP9/F6WA5CKGGC2USP9.SQUARE.jpg http://img.instructables.com/files/deriv/F6W/A5CK/GGC2USP9/F6WA5CKGGC2USP9.SMALL.jpg EEBIEWIGGC2USMA rghoff This instructable will show you how to repair a broken guitar neck and, depending on how severe the damage, how to do some minor cosmetic repair.  The guitar in question for this example is an Epiphone Les Paul Studio.  I actually bought this guitar about a year ago for the very purpose of practici...
By: rghoff

Continue Reading »]]> workshop Sun, 14 Nov 2010 14:58:03 PST http://www.instructables.com/id/Building-an-Ukulele-from-scratch/
Building an Ukulele from scratch - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOE/PEKV/GGC2U7W0/FOEPEKVGGC2U7W0.SQUARE2.jpg http://img.instructables.com/files/deriv/FOE/PEKV/GGC2U7W0/FOEPEKVGGC2U7W0.SQUARE.jpg http://img.instructables.com/files/deriv/FOE/PEKV/GGC2U7W0/FOEPEKVGGC2U7W0.SMALL.jpg EGT70L0GE5FI26H MichiTechnologies Hi, this is my first Instructable and it's about how to make your own individual ukulele mainly from ordinary wood, found in an ordinary wood shop. Material List For building your Uke you need mainly wood, but also some other, mechanical, parts. Here is the full list of things you need.  The ...
By: MichiTechnologies

Continue Reading »]]> workshop Sun, 14 Nov 2010 10:57:45 PST http://www.instructables.com/id/Built-In-Book-Cases/
Built In Book Cases - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FTV/SWFI/FYTCL83Z/FTVSWFIFYTCL83Z.SQUARE2.jpg http://img.instructables.com/files/deriv/FTV/SWFI/FYTCL83Z/FTVSWFIFYTCL83Z.SQUARE.jpg http://img.instructables.com/files/deriv/FTV/SWFI/FYTCL83Z/FTVSWFIFYTCL83Z.SMALL.jpg EB1RJ9VFYTD4IUV CarlS For this project, we needed built-in book cases for a long wall. By using pre-drilled melamine laminated boards and pre-built cabinets from the local home store, we were able to build them with a minimum of tools, and get a perfect fit to the room. Materials The book cases are made from a series...
By: CarlS

Continue Reading »]]> workshop Tue, 17 Nov 2009 12:15:59 PST http://www.instructables.com/id/how-to-bend-wood-for-funiture/ http://img.instructables.com/files/deriv/FK7/DX6I/GEW03YK4/FK7DX6IGEW03YK4.SQUARE2.jpg http://img.instructables.com/files/deriv/FK7/DX6I/GEW03YK4/FK7DX6IGEW03YK4.SQUARE.jpg http://img.instructables.com/files/deriv/FK7/DX6I/GEW03YK4/FK7DX6IGEW03YK4.SMALL.jpg ER6WN28GEW03YJS doubleshockz i will be showing you how to bend  wood for furniture pieces. this is for the gorilla glue contest. check out some other projects on my youtube channel. The materials you will need are: clamps - the bigger the piece the more clamps you need. wood table saw roller glue - any good wood glue will wor...
By: doubleshockz

Continue Reading »]]> workshop Mon, 8 Nov 2010 13:16:02 PST http://www.instructables.com/id/The-Radial-Arm-Saw-A-Guide-of-Sorts/
The Radial Arm Saw -- A Guide of Sorts - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0C/L0Y4/FRD80G60/F0CL0Y4FRD80G60.SQUARE2.jpg http://img.instructables.com/files/deriv/F0C/L0Y4/FRD80G60/F0CL0Y4FRD80G60.SQUARE.jpg http://img.instructables.com/files/deriv/F0C/L0Y4/FRD80G60/F0CL0Y4FRD80G60.SMALL.jpg EHIJM47GGBZP55B Phil B The radial arm saw is a very versatile machine around which a whole shop can be built.  It is one machine that allows a number of operations normally requiring different specific machines.  Unfortunately, electric miter saws have displaced the radial arm saw.  That is probably because many used a ra...
By: Phil B

Continue Reading »]]> workshop Fri, 12 Nov 2010 07:59:45 PST http://www.instructables.com/id/Illusionist-Heart-Locket/
Illusionist Heart Locket - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F20/UO99/GEG4GYPG/F20UO99GEG4GYPG.SQUARE2.jpg http://img.instructables.com/files/deriv/F20/UO99/GEG4GYPG/F20UO99GEG4GYPG.SQUARE.jpg http://img.instructables.com/files/deriv/F20/UO99/GEG4GYPG/F20UO99GEG4GYPG.SMALL.jpg EBAG4BAG9XBM8KS Pushan Panda I got the idea to make this from the movie The Illusionist, I was very intrigued as to how something like this could be made. As i count really find a set of easy instructions to make one of these, i decided to make my own. I took a lot of pics , but towards the end i kinda forgot to, but im sure it...
By: Pushan Panda

Continue Reading »]]> workshop Fri, 12 Nov 2010 08:47:42 PST http://www.instructables.com/id/Inner-tube-Tool-Roll/
Inner tube Tool Roll - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYP/DU4O/GFRWNNNU/FYPDU4OGFRWNNNU.SQUARE2.jpg http://img.instructables.com/files/deriv/FYP/DU4O/GFRWNNNU/FYPDU4OGFRWNNNU.SQUARE.jpg http://img.instructables.com/files/deriv/FYP/DU4O/GFRWNNNU/FYPDU4OGFRWNNNU.SMALL.jpg EIU1PFHGFRWR9X1 jurienaude It is always a good idea to have some basic tools on hand or in your car. Not being a fan of a  heavy noisy toolbox in the back of my car, I made this easy to stow tool roll that won't let the tool scratch and hit against each other making a noise. The Tool roll can also be attached to a bicycle or...
By: jurienaude

Continue Reading »]]> workshop Mon, 8 Nov 2010 08:40:30 PST http://www.instructables.com/answers/I-want-to-make-a-life-sized-model-of-Sputnik/ http://img.instructables.com/files/deriv/F1F/X7CU/GGAOZ6QP/F1FX7CUGGAOZ6QP.SQUARE2.jpg http://img.instructables.com/files/deriv/F1F/X7CU/GGAOZ6QP/F1FX7CUGGAOZ6QP.SQUARE.jpg http://img.instructables.com/files/deriv/F1F/X7CU/GGAOZ6QP/F1FX7CUGGAOZ6QP.SMALL.jpg Q3UQB5VGGAORD3L mtdna The original Sputnik looked really slick and threatening! I want one! Unfortunately, the original is unavailable, so I'll have to settle for something more modest. The original Sputnik looked like the one in the picture. My goal is to make a model that is life-sized and pretty good looking. Coolnes...
By: mtdna

Continue Reading »]]> workshop Tue, 9 Nov 2010 20:33:49 PST http://www.instructables.com/id/Brewing-Pressure-Gauge-in-a-Bail-Top-Bottle/ http://img.instructables.com/files/deriv/F0G/TCNO/GGAOW15C/F0GTCNOGGAOW15C.SQUARE2.jpg http://img.instructables.com/files/deriv/F0G/TCNO/GGAOW15C/F0GTCNOGGAOW15C.SQUARE.jpg http://img.instructables.com/files/deriv/F0G/TCNO/GGAOW15C/F0GTCNOGGAOW15C.SMALL.jpg EZYBTQ4GGAOW159 calischs I love brewing my own beverages (alcoholic and non-), but after coming home to one too many yeasty explosions I decided it was time take some safety measures.  In most craft brewing, the carbonation is developed by bottling the brew with some extra sugar, which the yeast turns into carbon dioxide.  ...
By: calischs

Continue Reading »]]> workshop Tue, 9 Nov 2010 07:04:49 PST http://www.instructables.com/id/Wooden-Candle-Holder/
Wooden Candle Holder - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFE/1O3K/J92EVYDWOWM/FFE1O3KJ92EVYDWOWM.SQUARE2.jpg http://img.instructables.com/files/deriv/FFE/1O3K/J92EVYDWOWM/FFE1O3KJ92EVYDWOWM.SQUARE.jpg http://img.instructables.com/files/deriv/FFE/1O3K/J92EVYDWOWM/FFE1O3KJ92EVYDWOWM.SMALL.jpg E5Q479RFXNEVYDXV9J sam A handmade tea light holder, crafted from a log.I shaped a log from our firewood pile into a slab, and drilled holes for the tea lights. Its pretty simple really- but the most important part is picking an attractive piece of wood, and paying attention to nice finishing. You need: a loga shaping too...
By: sam

Continue Reading »]]> workshop Fri, 29 Dec 2006 09:39:15 PST http://www.instructables.com/id/Build-a-Microwave-Transformer-Homemade-Welder/
Build a Microwave Transformer Homemade Stick/Arc Welder - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FTN/OKM4/FAHIWACV/FTNOKM4FAHIWACV.SQUARE2.jpg http://img.instructables.com/files/deriv/FTN/OKM4/FAHIWACV/FTNOKM4FAHIWACV.SQUARE.jpg http://img.instructables.com/files/deriv/FTN/OKM4/FAHIWACV/FTNOKM4FAHIWACV.SMALL.jpg E4JOULZFAHIWAC9 stasterisk I had no idea making a DIY welder would be so easy to do. And, it's pretty much FREE! Additionally, the stick welder you get is definitely better than anycheap commercial welder you can buy.Why is this homemade thing better than something you can buy? Because when you factor in shipping and labor an...
By: stasterisk

Continue Reading »]]> workshop Sun, 23 Dec 2007 19:47:13 PST http://www.instructables.com/id/Build-a-Tetris-DVD-or-book-shelf/
Build a Tetris DVD (or book) shelf - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FN5/ASM6/F23Z36QS/FN5ASM6F23Z36QS.SQUARE2.jpg http://img.instructables.com/files/deriv/FN5/ASM6/F23Z36QS/FN5ASM6F23Z36QS.SQUARE.jpg http://img.instructables.com/files/deriv/FN5/ASM6/F23Z36QS/FN5ASM6F23Z36QS.SMALL.jpg E146K5AF23Z36R8 odecom5 This instructable will involve creating a DVD/book shelf that is stackable in any number of configurations. You may recognize these pieces from something ;) This tutorial borrows the various pieces from Tetris and allows you to make a unique and classy DVD shelf that looks great and will fit into wh...
By: odecom5

Continue Reading »]]> workshop Mon, 28 May 2007 21:45:30 PDT http://www.instructables.com/id/LED-Ground-effects-kit-for-your-car/
LED Ground effects kit for your car - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCL/I6UE/F35J1NVT/FCLI6UEF35J1NVT.SQUARE2.jpg http://img.instructables.com/files/deriv/FCL/I6UE/F35J1NVT/FCLI6UEF35J1NVT.SQUARE.jpg http://img.instructables.com/files/deriv/FCL/I6UE/F35J1NVT/FCLI6UEF35J1NVT.SMALL.jpg EYWOXIXF3435TFV DeusXMachina Like the cool underglow kits on riced out cars but don't want to break the bank? This will show you how to make your own using LED strings. Indications: -This instructable requires some knowledge of electronics and auto body assembly. -This might involve taking apart large sections of your car's ...
By: DeusXMachina

Continue Reading »]]> workshop Wed, 27 Jun 2007 18:51:49 PDT http://www.instructables.com/id/Painting-without-clots/
Lump free paint (pinte sin grumos) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FP9/9ZI8/F07SA50E/FP99ZI8F07SA50E.SQUARE2.jpg http://img.instructables.com/files/deriv/FP9/9ZI8/F07SA50E/FP99ZI8F07SA50E.SQUARE.jpg http://img.instructables.com/files/deriv/FP9/9ZI8/F07SA50E/FP99ZI8F07SA50E.SMALL.jpg EKR0NQYF06CXMU1 rimar2000 A way of NOT contribute to global heating is reusing inputs, example paint. (Una forma de no contribuir al calentamiento global es reusar insumos, ejemplo pintura) Although sometimes the paint gets lumpy when it gets old (hace grumos con el tiempo) In the picture you can see the lumps on the su...
By: rimar2000

Continue Reading »]]> workshop Sat, 7 Apr 2007 19:31:29 PDT http://www.instructables.com/answers/Anyone-know-why-a-99-Chevy-blazer-would-engage-4-H/ /static/defaultIMG/default.SQUARE2.gif /static/defaultIMG/default.SQUARE.gif /static/defaultIMG/default.SMALL.gif QIIEURVGFRWRT2O VeiledSarcasm 2-Hi and 4-Hi work just fine but the 4-low just won't engage. Trying to figure out if  can DIY fix it if it's something simple, rather than pay an exorbitant amount to a mechanic. Thanks.
By: VeiledSarcasm

Continue Reading »]]> workshop Sat, 6 Nov 2010 13:49:03 PDT http://www.instructables.com/id/Cargo-area-platform-slider-for-SUV-truck-station/
Cargo area platform slider for SUV, truck, station wagon - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKR/TNLT/FHOHI4Y1/FKRTNLTFHOHI4Y1.SQUARE2.jpg http://img.instructables.com/files/deriv/FKR/TNLT/FHOHI4Y1/FKRTNLTFHOHI4Y1.SQUARE.jpg http://img.instructables.com/files/deriv/FKR/TNLT/FHOHI4Y1/FKRTNLTFHOHI4Y1.SMALL.jpg EA37JMEFHOHI500 galadriel I wanted to be able to slide out the "bed" of my cargo area in my Chevy Tahoe. I primarily wanted a work surface (leaning over the bumper was killing my back), but this should make it easier to access items stored in the cargo area as well. There are really nice products made that will do this, bu...
By: galadriel

Continue Reading »]]> workshop Wed, 25 Jun 2008 10:28:04 PDT http://www.instructables.com/id/build-a-backyard-barbecue!/
build a backyard barbecue! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXN/XBM1/F5Y3YV4Z/FXNXBM1F5Y3YV4Z.SQUARE2.jpg http://img.instructables.com/files/deriv/FXN/XBM1/F5Y3YV4Z/FXNXBM1F5Y3YV4Z.SQUARE.jpg http://img.instructables.com/files/deriv/FXN/XBM1/F5Y3YV4Z/FXNXBM1F5Y3YV4Z.SMALL.jpg EAL7454TT7EZ7BHOHC hivoltage create a great barbecue and outdoor eating area that will raise the value of your house! **updated with new pictures on the last step** cautions this project assumes that you have some basic knowledge of laying bricks and basic carpentry skills. this is not a small weekend project, and will eat y...
By: hivoltage

Continue Reading »]]> workshop Tue, 27 Mar 2007 18:58:34 PDT http://www.instructables.com/id/Building-a-macbook-laptop-drawer/
Building a (macbook) laptop drawer - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FP8/ID1N/GG2BCLGX/FP8ID1NGG2BCLGX.SQUARE2.jpg http://img.instructables.com/files/deriv/FP8/ID1N/GG2BCLGX/FP8ID1NGG2BCLGX.SQUARE.jpg http://img.instructables.com/files/deriv/FP8/ID1N/GG2BCLGX/FP8ID1NGG2BCLGX.SMALL.jpg EAMQ4BUGFRWQOQV Petrovortski Although i have a big desk at home, i want it to be clean and without piles of stuff that i still have to finish. I also don't use my macbook as a laptop, but as a desktop, connected to a 24inch screen and controlled with an wireless mouse and keyboard and i really hate all the cables behind my desk...
By: Petrovortski

Continue Reading »]]> workshop Wed, 3 Nov 2010 11:56:18 PDT http://www.instructables.com/answers/Looking-for-some-suggestions-to-repair-an-guitaris/ http://img.instructables.com/files/deriv/FB8/E2G9/GG2BCO42/FB8E2G9GG2BCO42.SQUARE2.jpg http://img.instructables.com/files/deriv/FB8/E2G9/GG2BCO42/FB8E2G9GG2BCO42.SQUARE.jpg http://img.instructables.com/files/deriv/FB8/E2G9/GG2BCO42/FB8E2G9GG2BCO42.SMALL.jpg Q1Z78XBGFRWQRRU JonPWills I have an anime figurine made by alter. She is a Azusa Nakano with a cool guitar. A very cute figurine I must say.Anyway uh, she took a little tumble and her guitar got slightly damaged, specifically the tuning knobs up top did, four were lost and one was damaged a little. So I am trying to figure ...
By: JonPWills

Continue Reading »]]> workshop Wed, 3 Nov 2010 21:40:09 PDT http://www.instructables.com/id/How-to-make-a-cup-holder-for-a-Smart-car/
How to make a cup-holder for a Smart car - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBX/6W5T/G0KQKXXR/FBX6W5TG0KQKXXR.SQUARE2.jpg http://img.instructables.com/files/deriv/FBX/6W5T/G0KQKXXR/FBX6W5TG0KQKXXR.SQUARE.jpg http://img.instructables.com/files/deriv/FBX/6W5T/G0KQKXXR/FBX6W5TG0KQKXXR.SMALL.jpg ECRVN1MG0KQKVJ4 Mike73 I recently bought a smart car to be a little more environmentally friendly. I've looked at the cup-holder specificallly made for the car (remember, European cars have stuff like that as extra features you have to pay for). After reading some smart forums, I found the following statement:"The smart c...
By: Mike73

Continue Reading »]]> workshop Sun, 11 Oct 2009 14:10:45 PDT http://www.instructables.com/id/Drink-Can-Tinwork/
Drink Can Tinwork - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F39/6R31/GFRWML4F/F396R31GFRWML4F.SQUARE2.jpg http://img.instructables.com/files/deriv/F39/6R31/GFRWML4F/F396R31GFRWML4F.SQUARE.jpg http://img.instructables.com/files/deriv/F39/6R31/GFRWML4F/F396R31GFRWML4F.SMALL.jpg EGCSDSRGFRWQRFU Mangetout How to transform an aluminium drink can into a charming little embossed metal box. Here's the video version of the instructions: Clean off the paint Using abrasive paper and/or steel wool, rub off the paint/printing on the outside the can.  This doesn't have to be perfect, as tthis wi...
By: Mangetout

Continue Reading »]]> workshop Sun, 31 Oct 2010 15:34:32 PDT http://www.instructables.com/id/Build-a-Really-Good-Tri-Square/
Build a Really Good Tri-Square - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFT/SGN1/GFRWQOKI/FFTSGN1GFRWQOKI.SQUARE2.jpg http://img.instructables.com/files/deriv/FFT/SGN1/GFRWQOKI/FFTSGN1GFRWQOKI.SQUARE.jpg http://img.instructables.com/files/deriv/FFT/SGN1/GFRWQOKI/FFTSGN1GFRWQOKI.SMALL.jpg EMLBOUDGFRWMECP Phil B I wanted to make a tri-square (or try-square--some claim both are acceptable), and I wanted to use my wire-feed welder.  I also wanted a larger than normal tri-square.  This is my new square finished and ready to use. Cut materials The square is all steel from pieces I already had in my worksho...
By: Phil B

Continue Reading »]]> workshop Sat, 30 Oct 2010 13:17:22 PDT http://www.instructables.com/id/How-to-Build-a-Train-Table-with-Hole-in-Center-F/
How to Build a Train Table with Hole in Center - Finished in Hours - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8S/RZ2O/GFRWPZ1Q/F8SRZ2OGFRWPZ1Q.SQUARE2.jpg http://img.instructables.com/files/deriv/F8S/RZ2O/GFRWPZ1Q/F8SRZ2OGFRWPZ1Q.SQUARE.jpg http://img.instructables.com/files/deriv/F8S/RZ2O/GFRWPZ1Q/F8SRZ2OGFRWPZ1Q.SMALL.jpg EJ0STIRGFRWMA47 HollyMann This is a  train table plan created for all those avid train-conductors in training! It is simple to build, takes only a few hours (plus paint drying time) and costs about $30 USD to build. My son's old preschool had a custom-built train table that was so unique because of its easy access - a hole ...
By: HollyMann

Continue Reading »]]> workshop Fri, 29 Oct 2010 13:46:09 PDT http://www.instructables.com/id/How-to-make-beautiful-tumbled-mosaic-tiles-inexp/
How to make beautiful "tumbled" mosaic tiles inexpensively... - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FAS/JF44/GFMBYN3W/FASJF44GFMBYN3W.SQUARE2.jpg http://img.instructables.com/files/deriv/FAS/JF44/GFMBYN3W/FASJF44GFMBYN3W.SQUARE.jpg http://img.instructables.com/files/deriv/FAS/JF44/GFMBYN3W/FASJF44GFMBYN3W.SMALL.jpg EYP9TYSGFMCD5FN DallasDeckard This is my first instructable. :-) Are you remodeling a bathroom or a kitchen or anywhere you need mosaic tiles? Do you want accents in your tile design that don't exist?I am remodeling my guest bathroom and I wanted some mosaic pieces that matched the tile I was installing. However, there were no ...
By: DallasDeckard

Continue Reading »]]> workshop Tue, 26 Oct 2010 03:12:24 PDT http://www.instructables.com/id/Wood-Fired-Brick-Oven/
Wood-Fired Brick Oven - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJK/5M9M/GFMC837L/FJK5M9MGFMC837L.SQUARE2.jpg http://img.instructables.com/files/deriv/FJK/5M9M/GFMC837L/FJK5M9MGFMC837L.SQUARE.jpg http://img.instructables.com/files/deriv/FJK/5M9M/GFMC837L/FJK5M9MGFMC837L.SMALL.jpg ENGOFUYGFMC837H neffk This article is about the brick oven I made in my back yard. There are lots of similar articles on the interwebs, but I decided to post mine anyway.  There are a lot of variations, so my oven may be informative to others who are designing their own oven. Just to be clear, this is a black oven.  The...
By: neffk

Continue Reading »]]> workshop Sun, 24 Oct 2010 00:44:11 PDT http://www.instructables.com/id/My-Vertical-Shoe-Rack/
My Vertical Shoe Rack - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FPZ/UW3S/GFMBY7GL/FPZUW3SGFMBY7GL.SQUARE2.jpg http://img.instructables.com/files/deriv/FPZ/UW3S/GFMBY7GL/FPZUW3SGFMBY7GL.SQUARE.jpg http://img.instructables.com/files/deriv/FPZ/UW3S/GFMBY7GL/FPZUW3SGFMBY7GL.SMALL.jpg E1GHAQAGF5V27W4 pcapelo Good news everyone, My friend  always complained that she needed a better shoe rack. It's not that you can't buy it, but the ones you see on the market are really limited (maybe I am just too picky). LOL There are a lot of good projects online and after some research I chose one and decided ...
By: pcapelo

Continue Reading »]]> workshop Sat, 23 Oct 2010 15:39:11 PDT http://www.instructables.com/answers/Non-toxic-natural-cheap-and-WATER-PROOF-adhesive/ /static/defaultIMG/default.SQUARE2.gif /static/defaultIMG/default.SQUARE.gif /static/defaultIMG/default.SMALL.gif QSJHHRXGFMC80PW enisdogru I'm a quality engineer working for a company in Turkey, the company collects the coaldust ( powder form of the coal )  from all the cities of Turkey and makes them briquettes by pressing with very powerful machines. Of course we use some adhesives for mechanical strength of the briquettes. We use CM...
By: enisdogru

Continue Reading »]]> workshop Sat, 23 Oct 2010 03:30:50 PDT http://www.instructables.com/id/DIY-Awning/
DIY Awning - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQU/F4P5/GFKVI9GO/FQUF4P5GFKVI9GO.SQUARE2.jpg http://img.instructables.com/files/deriv/FQU/F4P5/GFKVI9GO/FQUF4P5GFKVI9GO.SQUARE.jpg http://img.instructables.com/files/deriv/FQU/F4P5/GFKVI9GO/FQUF4P5GFKVI9GO.SMALL.jpg EY4PTL8GFKVOUZ1 bclamore Hurricane Ike hit us in 2008 and knocked out power for a few days.  My residence was not designed with energy efficiency in mind and so relied 100% on AC to keep it cool.  I made this awning in attempt to keep it cooler inside by blocking the radiant sun energy.  Indeed, it was about 3 degrees coole...
By: bclamore

Continue Reading »]]> workshop Fri, 22 Oct 2010 13:10:30 PDT