|| LM555 || Flashing Railroad Lights

by Zero The Null

981251

Intro: || LM555 || Flashing Railroad Lights

This circuit flashes two red LEDs for a model railway crossing.

I hope enjoing this construction, for more DIY videos please SUBSCRIBE to may youtube channel , Like and Share ... Thanks <3

*****Follow me : *****

Facebook : https://www.facebook.com/MakeTubeChan...

Twitter : https://www.facebook.com/MakeTubeChan...

YouTube : https://www.youtube.com/channel/UCNn9wVKFuLAf3g-0f...

STEP 1: Construction Materials and Tools

Construction materials :

Resistors

  • Ra = 68kOhm
  • Rb = 39kOhm
  • RL1, RL2 = 220 - 470Ohm

Capacitor

  • C = 47uF/16V

Semiconductors

  • LM555
  • Led1, Led2

Τhe required tools :

  • Breadboard
  • DC PowerSupply+12Volt
  • Some wires

STEP 2: Follow the Steps

Follow the steps like in the photos...

STEP 3: Follow the Steps.

Follow the steps like in the photos...

Thanks for watching.. and don't forget to follow me --> https://www.youtube.com/channel/UCNn9wVKFuLAf3g-0f...

Comments

Nc88fan 8 years ago

I made a similar circuit when taking electronic classes and used ir emitters and detectors to trigger the crossing lights from a distance before the crossing and latching them till the train fully cleared the crossing. Made it very realistic. Can't remember the full schematic but maybe you can incorporate it into your design.