1 WTC (1:10,000)
Intro: 1 WTC (1:10,000)
In memory of the victims of 9/11, their loving families and the unsung heroes.
(Left image : Google Images)
STEP 1: Tools of the Trade
3 ice cream sticks
1 toothpick
1 large ice cream stick
Tools
A pen
A marker
A ruler
A file
A cutter
1 bottle wood glue
STEP 2: The Building
I take 2 ice cream stick, and draw a few lines (image diagram). Then, I cut the sticks and I have 4 parts. Next, I glue them together, and I file the surface according to the lines.
STEP 3: The Comm Tower
Remember the toothpick?
I cut it in 1cm long, and I glue it on top of the building.
STEP 4: The Land
For the land, I cut the large ice cream stick in two. Using a file, I rasp it into a curve (2nd image), then I glue it together.
STEP 5: The Sites
For the two sites, I cut the remaining ice cream stick into two parts (1cm X 1cm). Then, I draw each of them a border. Now, I have the site of north tower and the site of south tower.
STEP 6: The Assembly
Now, I have the part of the land, the tower, and the sites ready. I glue its into the position.
STEP 7: The Reference
Using the tower location (left image taken from Google Images), I corrected the placement of the parts.
Lastly, the comparison size between a match.
3 Comments
JanetS137 5 years ago
1. What size were the popsicle sticks cut down to?
2. You mentioned that this was a scale model of 1:10,000, since I'm not good at math, would you be able to tell me what my scale would be if, I desired the towers to be around 7-8 inches high?
Thank you in advance for your assistance.
momoluv 8 years ago
Great work :-)
IxoraStrawberry 8 years ago