True Trigger, 10 Round, Auto-Loading, Knex Concept Rifle
Intro: True Trigger, 10 Round, Auto-Loading, Knex Concept Rifle
This is a knex rifle. It has a 10 round magazine that is jam free. The stock is by "The Jamalam" so full credit goes to him on that. ENJOY :D
The second picture you see was done by oblivitus, so give him credit on that. Feel free to comment on it if you like it.
The second picture you see was done by oblivitus, so give him credit on that. Feel free to comment on it if you like it.
STEP 1: Building the Stock.
Build the stock as shown.The third picture shows how to connect it.
STEP 2: Building the Body and Trigger.
Build the body and place the trigger. I think you can figure out how to build the trigger.
STEP 3: Build Body and Inner Barrel.
Build everything as shown.
STEP 4: Connecting the Body.
Connect the body pieces together.
STEP 5: Building and Connecting the Handle.
Build the handle and then connect it together.
STEP 6: Building the Magazine.
Build the magazine ashsown.
STEP 7: Building the RAMS
Build the RAMS as shown. (right= mag. RAM) (left= barrel RAM)
STEP 8: Connecting and Adding Rubber Bands.
Connect the gun and add rubber bands.
364 Comments
Element Force 11 years ago
XxMechTechxX 12 years ago
Barris 12 years ago
donnie2 13 years ago
donnie2 13 years ago
donnie2 13 years ago
donnie2 13 years ago
pie25x 13 years ago
Intrusion 13 years ago
uberrobodude 14 years ago
bannana inventor 14 years ago
Seleziona 14 years ago
DJ Radio 14 years ago
~Z~ 14 years ago
jusmis master 14 years ago
jusmis master 14 years ago
ol987986 14 years ago
dont make the stock, just use a ram rod nad build a stock around it.
kg125 14 years ago
yong2x 14 years ago
nicko2 14 years ago