12V 90A Car Alternator to Electric Generator 1000W (Battery Excitation ) #EP2

**Introduction and Equipment Setup**:

  - Introduction to the episode and its purpose.

  - Description of the equipment needed, such as a car alternator, a 12V battery, soldering tools, paper tape, DC clamp meter, multimeter, bulb, spring, etc.

Supplies

**Battery Excitation**:

  - Explanation of the need for battery excitation to power up the rotor or field winding.

  - Instructions on connecting the battery to the alternator for excitation.

  - Testing the connection to ensure functionality.

Step 1:

**Connection of Output Wires**:

  - Guidance on connecting output wires from the alternator, emphasizing the need for thick wires due to high amperage.

  - Description of connecting the positive output wire to the main positive screw on the alternator and connecting the negative wire to the alternator's body.

Step 2:

**Power Generation Testing**:

  - Instructions for testing the alternator's power generation capability using a multimeter and a load (bulb).

  - Testing under various conditions, including hand rotation, rope rotation, short circuit conditions, and increasing RPM.

  - Demonstrating the generation of electricity and measuring voltage and current output.

Step 3:

5. **Further Testing and Adjustments**:

  - Additional testing with different loads such as car and motorcycle bulbs.

  - Experimentation with short-circuit conditions using a spring.

  - Attempting to optimize performance by adding another belt in parallel to the pulley.

Step 4:

**Conclusion and Future Plans**:

  - Summary of the testing results and observations.

  - Announcement of future plans for the channel, focusing on alternator and generator-related content.

  - Introduction of additional channels and a membership page for deeper engagement with viewers.