2 in 1(chair + Table)

THIS IS CONVERTABLE WHICH CAN BE CHAIR OR TABLE.I MADE AN SMALL FIRST THAN THIS.I PLANE IT PROPERLY.

Step 1: I MAKE AN SMALL MODEL ONLY.YOU CAN ALSO MAKE IT BIG.FIRSLY YOU NEED 2 TO 3 HINGE & 5 PIECE OF WOOD AS SHON IN PICTURE

Step 2: TWO PIECE OF WOOD ASSHOWN IN PIC.ONE SMALL & ONE LITTLE MORE BIGGER THAN SMALL.

Step 3: SOME SCREEWS & NAILS

Step 4: I ALLREADY MADE TABLE AS SHOW

Step 5: NOW WE PASTE SMALL PIECE OF WOOD.

Step 6: NOW WE ATTACH TWO PIECE OF WOOD BY HINGE.

Step 7: HERE OUR PART-2

Step 8: NOW WE ATTACH WHAT EVER WE MAKE IN STEP 6 TO TABLE.

Step 9: NOW IT IS READY.CHAIR +TABLE

Step 10: PUT 'A' PIECE OF WOOD ON 'B' PIECE OF WOOD.NOW PULL PART-1 UPWARDS,THIS IS YOUR CHAIR.

Step 11: & PULL DOWN BACKWARD TO MAKE IT TABLE

Step 12:

Comments

[Pranay Jangid]

PLEASE VOTE IT PLEASE.

[wold630]

Very inventive!