30 Second Pen Gun
Intro: 30 Second Pen Gun
Super easy pen gun. All that you need is a Pilot G2 pen or similar pen. (They have easy access to the spring.)
STEP 1: Get a Pilot G2 Pen
Come on people, this step takes five seconds. If you don't have one, you can find them on the ground at school. Once you have obtained this then you can begin with the rest of the steps
STEP 2: Disassembly
Disassemble the pen (don't bother with the small white piece at the end of the pen near the clip) That's all you need for this step.
STEP 3: Put the Spring on the Writing End of the Pen
Put the spring on the pen.
STEP 4: Put the Writing Part Into the "Chamber"
Shove the pen in there- just not too hard. You don't want it in there too hard.
STEP 5: Put the Cap Back on the Pen
Put the cap back on- just barely, if you bump it- it will fall off. Then for firing just click the pen and it should get at least 10 - 20 feet depending on how hard you press it. For variation you might want to glue the cap to the end of the writing part.
17 Comments
Dadawg 11 months ago
benjaminhardesty 2 years ago
Delta_thebazookaman 2 years ago
luftwaffe29 13 years ago
Subscribe to Jakerbug 3 years ago
l33hna 8 years ago
Subscribe to Jakerbug 3 years ago
T3hpw9ag3 16 years ago
l33hna 8 years ago
Oyarsa 15 years ago
death_to_you_now 14 years ago
_Scratch_ 12 years ago
Plo Koon 13 years ago
polar568 13 years ago
stopanator 14 years ago
sharlston 14 years ago
rocksalt2342 14 years ago