Introduction: 4-Guitar Wall Mount/Hanger
I'll show you how to make this for about $15.
Generally, I post photo how-to's on instructables. This will allow almost everyone to replicate whatever I make, while not taking hours for me to re-post. For those who want detailed commentary, a few more pictures, and a step-by-step, I post all of my DIY's on my blog, DIYandSIMPLIFY. Feel free to drop by sometime and check out all my posts. Otherwise, you can follow along pictorally through this. Enjoy!
What you need:
Here is a quick and dirty:
General Materials List:
(1) 1X6 @ 6 ft
(1) 1X4 @ 6 ft
scrap piece of 3/4"x1/2" or around about that (for the latches)
some screws / nails
round pencil
paint
General Tools List:
Drill
Jigsaw
Router (not mandatory but very helpful)
Sandpaper/Sanding Block/ Sanding disc
Paintbrush
Generally, I post photo how-to's on instructables. This will allow almost everyone to replicate whatever I make, while not taking hours for me to re-post. For those who want detailed commentary, a few more pictures, and a step-by-step, I post all of my DIY's on my blog, DIYandSIMPLIFY. Feel free to drop by sometime and check out all my posts. Otherwise, you can follow along pictorally through this. Enjoy!
What you need:
Here is a quick and dirty:
General Materials List:
(1) 1X6 @ 6 ft
(1) 1X4 @ 6 ft
scrap piece of 3/4"x1/2" or around about that (for the latches)
some screws / nails
round pencil
paint
General Tools List:
Drill
Jigsaw
Router (not mandatory but very helpful)
Sandpaper/Sanding Block/ Sanding disc
Paintbrush