A CELL PHONE HAND SUPPORT

by OpenL4BNorte _ Hackerspace

6.8K12712

Intro: A CELL PHONE HAND SUPPORT

List of Materials:
·      2 Packages of Sugru of the same color and 1 Packages of a different shade.
·      Scissors or cutter
·      A small plastic bag
·      1 stainless steel wire (approximately 25 to 30 centimeters long)

create by: Lizardo Augusto

STEP 1:

Take the 2 packages of Sugru of the same color, open them with the scissor or cutter.

STEP 2:

Sugru comes in different colors and the consistency of the product is similar or just like clay, doesn’t stain and is not grease, having said that I proceed to prove the malleability by sculpting a little hand, but you can do your favorite figure.

STEP 3:

With the other package of Sugru and the small plastic bag, I made a base for the cell phone (as shown in the picture).

STEP 4: Assemby and Finish

Attached to one point of the stainless steel wire the base and to the other end the little hand (as shown in the picture).

Let dry for 24 hours and the piece will be firm and very resistant.

11 Comments

BigMrTree 10 years ago

I originally thought you got the hand from a doll or something, nice job on sculpting the hand!! This is a very cool and unique cell phone holder!! Well done!!

viantoni 10 years ago

This is a very cool and practical gadget. Thank you!

ben7798 10 years ago

This is pretty cool. Nice job

Kiteman 10 years ago

I like the touch of the small pellet of Sugru at the bend - it will stop annoying clicking noises on your desk.