Introduction: A Star
I'm back with more origami for you! Today I am introducing how to make a 3D star.
Okay, so a 2D isn't that hard, but a 3D, there's many steps.
Let's get started, shall we?
Step 1: INGREDIENTS
All you need is...
Step 2: CUT OUT THE STRIP
Cut a thin piece of paper like in the picture, preferably the length of an A4 sized paper.
Step 3: A KNOT
At an end, tie a knot and tighten as tight as possible; like in the photo.
Step 4: FOLD
Fold the long and short end inwards and continue folding the long end at the edges to create the pentagonal shape.
Step 5: ALMOST THERE...
Shove in the small sticking out piece of paper into the pentagon to get the picture above.
Step 6: POP & GO!
Add pressure on all five sides of the star to get its 3D shape and voila, it's done!