ACTION CAMERA POV DIY HELMET MOUNT WITH 3€

I've got a ski Helmet and an action camera I've to put it toghether but how?
I don't want to drilling or glueing my helmet, on Internet i saw very interesting products to do what i need but not for less of 20 Euros + shipping costs... a crazy price for a piece of sheetmetal and a suction cup...
OK I've built it with 3 Euros How? Find it on next pages....

Step 1: Action Camera Helmet Mount - What You Need

WHAT YOU NEED...

- ski helmet
- a bullet cam
- 2 suction cup
- 2 cut washers
- a sheetmetal 95x40 mm
- 1 clip lock for electric tubes 28 mm of diameter
- one M3 screw, one M3 bolt and a washer
- Tools: one hex key, and a tube hex key

Step 2: Action Camera Helmet Mount - Put It Toghether

OK let's start,
fix the suction cups to the sheetmetal and lock it with washers (as you can see in first image)
fix the clip the sheetmetal with screw and bolt (apply a strong torque)
ok the clip is fixed and it can rotate around his axis.

Step 3: Action Camera Helmet Mount - Mount on the Helmet and GOGOGO

Clean the helmet, fix the suctions on the surface and register your best sport
ski motocross or whatever you want
Goodbye

Comments

[shockwave123456789]

 What kind of helmet is that?

[Groob]

http://www.hmrhelmets.com/Ski.aspx

[Ace[ITA]]

i'ts a ski helmet by HMR
the model is H2
more information on www.mhrhelmets.it

[E_MAN]

Nice Job! A am just going to warn you, I tried this last year skiing in Canada, and ran into a problem. The cold caused any moisture on the suction cups to freeze. This caused them to eventually fall off and could not be put on until they warmed up. I now have a new camera that came with a goggle strap mount, and a sticky pad that i might put on the inside of my boot..... Have fun skiing!

[speedfreak007]

if you fall on the camera, that screw will hurt your head!

[lilrou15]

haha i can see your reflection!

[ph1lt3ch]

Where did you get the camera?