Air-Soft Grenade Thingy
Intro: Air-Soft Grenade Thingy
This instructable will tell you how to make an Air-Soft grenade thingy.
STEP 1: Supplies
These are the supplies you need to make this grenade.
Party Popper
Plastic BB's
Bic Pen
Flat Head Screw Driver
Highly Maneuverable Gloves
Party Popper
Plastic BB's
Bic Pen
Flat Head Screw Driver
Highly Maneuverable Gloves
STEP 2: Taking Apart the Popper
Insert the flat headed screw driver into the edge of the popper and pop out the cardboard cap and keep it for later.
STEP 3: Removing the Confetti
This is where you might want to where gloves to protect your hands, I didn't because I'm a bad example. Carefully use the pen to remove the confetti and leave the white cardboard alone.
STEP 4: Filling the Popper
Now take your BB's and pour about 20 into the empty popper and replace the cap.
STEP 5: Making Sure the Cap Is On
Take the back of your pen and press evenly around the edges of the cap to secure it into place. Then aim and shoot, and it scatters the BB's every where.
P.S. I am not responsible for any injuries.
P.S. I am not responsible for any injuries.
51 Comments
Itchyzombie 12 years ago
lol
The Homemade Arsenal 12 years ago
Aside from lack of originality and improper naming, nice 'ible. If you shoot only one bb out of a bic pen using the pull-string thing as the propellant, it works a bit better.
The Homemade Arsenal 12 years ago
https://www.instructables.com/id/Concussion-Grenade/
Let me know what you think!
Airsoftmaniac123 14 years ago
The Homemade Arsenal 12 years ago
superawesomekid78 13 years ago
rockadio101 13 years ago
singhjr96 14 years ago
AnarchistAsian 13 years ago
AnarchistAsian 15 years ago
Rookie12 13 years ago
josefu0 14 years ago
chopstx 14 years ago
singhjr96 14 years ago
OMFG!!! 14 years ago
:) :) :) :) :) :)
mr. cool 384 14 years ago
[aTRi0X] 14 years ago
lol
Jawa888 14 years ago
dla888 14 years ago
jakk21 14 years ago