Airsoft Bipod
Intro: Airsoft Bipod
This instrucatable is quite easy to do because it requires very few materials and tools and some common sense, not that this bipod can be easily altered for other guns like a pellet or BB gun so enjoy and have fun.
Tools
-Hot glue gun
-Spray paint of your choice
-Saw
-Tape measure
Materials
-24inch PVC Tube
-Four 6inch Tridon Rings
Tools
-Hot glue gun
-Spray paint of your choice
-Saw
-Tape measure
Materials
-24inch PVC Tube
-Four 6inch Tridon Rings
STEP 1: PVC Tubes
Cut the PVC Tube into two 10 inch PVC Tubes and one 4 inch PVC Tube".
STEP 2: Cut in Half
Cut the 4inch PVC tube directly in two.
STEP 3: Glue It
Hot glue one of each end of the 10inch tube to the middle of one of the 4inch half ( to an angle suitable of your gun to make sure it is not touching the ground) and then take the other half of the 4inch tube and glue each end to the 10 inch PVC tube.
STEP 4: Linking
link the two of the Tridon Rings together twice.
STEP 5: Paint It
Paint it to your likings.
P.S. Painting It looks much better, don't paint the Tridon Rings.
P.S. Painting It looks much better, don't paint the Tridon Rings.
STEP 6: Put It Together
Attach the Bi pod to your gun with the two Tridon Rings.
And that's all, your done, have fun!
And that's all, your done, have fun!
11 Comments
airsoft1017 13 years ago
mygamertag2010X 14 years ago
knuckel 14 years ago
djzadjza 14 years ago
airsoft_noob_killer 14 years ago
berky93 14 years ago
berky93 14 years ago
thing 2 14 years ago
thing 2 14 years ago
nuclear nate 14 years ago
1337807 14 years ago