Airsoft Claymore Type Thing.

Introduction: Airsoft Claymore Type Thing.

This is a claymore thing that blows up and sprays airsoft BB's everywhere.

Step 1: You Will Need.....

-Airsoft BBs
-Firecracker
-Skewer stick
-Masking Tape

Step 2: The Body

First, take the skewer stick and tape the firecracker to it. Don't put too much tape on it, or it will weaken the blast.

Step 3: Roll the BB's

Take the BB's and roll them on a piece of masking tape about 2-3 inches.

Step 4: Attach the BB's to the Stick

It should look like this.


After you're done, light it up and run. This is good for sneaking up on people and lighting it up when they don't see you. Constructive critisism is wanted.

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest
    • Plastic Contest

      Plastic Contest

    58 Discussions

    0
    jeff-o
    jeff-o

    12 years ago on Step 4

    Have you actually tested one? A video would be awesome!

    0
    jpguitardude
    jpguitardude

    Reply 12 years ago on Step 4

    hey, ill make a video of it and post it tomorow. thanks

    0
    tigerbomb8
    tigerbomb8

    Reply 10 years ago on Step 4

    upload the vid to youtube and post a link for us

    0
    jpguitardude
    jpguitardude

    Reply 12 years ago on Step 4

    send me a message with your email, and ill send you a video. thanks.

    0
    SM2808
    SM2808

    10 years ago on Step 4

    try putting it lower on the stick. Then tape 4 matches to the stick (make sure the heads are touching the fuse, try putting it a little lower than right on the top of the fuse). Next take the two strikers from the box and place them on the matches. Then wrap them to the matches with a rubber band, not too tight, not too loose. Somehow tie a fishing line to the strikers and tie it too something so when someone trips it he ignites the matches, igniting the fuse. Hope I complicatedly helped.

    0
    jamboo754
    jamboo754

    10 years ago on Step 4

    thats not a claymore thats a gernade on a stick try adding a trip wire to start it that would make it a lot better

    0
    jggammer
    jggammer

    10 years ago on Step 1

    not firecracker that is a spinner is spins around

    0
    eulaliaaaa!
    eulaliaaaa!

    Reply 10 years ago on Step 1

    No, that's is a firecracker. It probably just is the same color as the spinner.

    0
    1spartan95
    1spartan95

    11 years ago on Introduction

    use a bottle rocket and shoot it out of a tube as an rpg

    0
    stg.badass
    stg.badass

    Reply 10 years ago on Introduction

    well your going to get mauled in a airsoft war if you do that buy a airsoft gun

    0
    XWXAXDXEX
    XWXAXDXEX

    Reply 10 years ago on Introduction

    that would take like three, bottle rockets are
    rather weak and barely carry thier own weight.

    0
    ac1D
    ac1D

    12 years ago on Introduction

    is not a claymore something wich blow when someone walk by? I think its more like a grenadde. tough you could make a claymore version ussing a pulling firework(google d0rk: pulling firecracker). generally they cost about $0.75 for 2-3 box of 12. its cheap!

    0
    jpguitardude
    jpguitardude

    Reply 12 years ago on Introduction

    That's why I named it the claymore type thing. And you don't throw it like a grenade, the stick is for mounting it on the ground.

    0
    XWXAXDXEX
    XWXAXDXEX

    Reply 10 years ago on Introduction

    lol there's no mounting. firevrackers will blowup on ur fingers, you cant mount it bit having doublesided take like a sticky would be good.

    0
    stepherwin
    stepherwin

    11 years ago on Introduction

    I don't play airsoft but here's an idea for your claymore. Goto a hobby store and get a packet of model rocket engine igniters. (small pieces of wire bent in half with chemicals on the middle part.) get yourself some cheap insulated wire (double cord...like for small speakers) Also going to need a battery (big box type --preferably with spring terminals) tape and alligator clips.

    now that you've got the stuff here's how to put it together.

    1. build your claymore as normal.
    2. tape the igniter to the fuse. ( this takes know-how...the tip of igniter w/chemicals needs to be in contact with the fuse BUT not the tape and the two halfs of the igniter must remain separate. so...
    A. take tape and wrap it around the middle of one of the halfs (insulates it ) then lay ingniter on the fuse and tape to fuse (MAKE SURE TO LEAVE THE TIP OF IGNITER FREE OF TAPE AND BOTH ENDS OF THE IGNITER FREE OF TAPE AS WELL)
    B. Alligator clips attach to ends of the igniter and run the wire out probably no more than 20-30ft..DEPENDS UPON BATTERY STRENGTH

    3. in the field
    A. set your claymore and unroll your wire.
    B. attach one end of your wire to battery terminal
    C. wait for target
    D. when ready connect other wire to other terminal (which completes the electric circuit and will cause the igniter to combust. This lights the fuse of the claymore and BANG)

    *** putting this together and making it work takes a bit of experience so I suggest you practice before you play. figure out how to best wire the fuse so that it works everytime. also get to know how long the wire can be and carry the charge from the battery. (the strength of the battery makes a difference too...weak battery's won't set off the igniter from the same distance that a fully charged on will.

    hope it helps have fun

    0
    XWXAXDXEX
    XWXAXDXEX

    Reply 10 years ago on Introduction

    LOL very good, you could also have a model rocket all put together and have it angeled at a gun on the ground and have the detanatoyr with you and shoot the rocket at them! a rocket to the gut wont feel too good huh?

    0
    aseaheru
    aseaheru

    Reply 11 years ago on Introduction

    coolness, thats how they do it, but more bbs and diff items

    0
    avwos
    avwos

    Reply 11 years ago on Introduction

    You had me at rocket engine :)