Introduction: Altoids Grill
As a student in college, I don't have a big webber grill by my dorm. So I made this. Cooks one hot dog, burger pattie, and cost less than 5 dollars
Step 1: Step 1: Sanding
Sand off the paint from the top. I used a Preformax power sander.
Step 2: Step 2: Drill the Holes
I used a 1/16" drill bit
Step 3: Step 3: Add Grill Crate
I used a fine wire I found at ace. Not hard to come by.
4 Comments
9 years ago
that doesn't look like charcoal briquettes. .that looks like oil
9 years ago
So simple, so funny! :D
10 years ago
I didn't realize that I forgot to put a fuel source in there. Use charcoal brockets.
10 years ago
Cool!