Introduction: Arduino 2 Button 2 Led

First we will add the power and ground wires.

Step 1:

Now we will add the first LED and 220Ω resistor

Step 2:

Now the second LED and resistor the same way.

Step 3:

Then we will add the first button and 10kΩ resistor.

Step 4:

Then the second one.

Step 5:

Then we will wire ou the buttons to port 8 and 9

Step 6:

Then we will fix the wiring to the LED

Step 7:

And now we wire up the LEDs to port 10 and 11.