Arduino 4 Wheel Drive Bluetooth RC Car Using UNO R3, HC-05 and L293D Motorshield With Coding and Android App

Intro: Arduino 4 Wheel Drive Bluetooth RC Car Using UNO R3, HC-05 and L293D Motorshield With Coding and Android App

Today I am going to tell you about how to make a arduino 4 wheel drive bluetooth RC car using HC 05 , L293 motor shield , 4 DC motor, with coding and app for android to control car.

Component used :-

1-Arduino UNO R3

2-Bluetooth HC-05

3-Motorshield L293D

4-4 DC motor

5-Android mobile

STEP 1: Tightly Secrew to Motor to Chasis and Connect Wires in Terminal of Motors

STEP 2: Join the HC 05 Blutetooth Module Wires to Arduino (as Per Diagram)

STEP 3: Insert Motor Shield in Arduino As Shown in Pic

STEP 4: Connect Motor Wires in Motor Shield As Shown in Pic

STEP 5: Connect Saperate Power Wire for Arduino and Motor Shield

STEP 6: Connect Arduino to Pc or Android to Upload the Program Given in Video Discription

STEP 7: Remove HC 05 Wires Before Uploading the Program

STEP 8: Install the App Given in Video Discription and Your Rc Car Is Ready

Comments

[RajaNabilla]

i cannot upload the program. help me... it stated that CPU speed not supported

[RajS164]

how to connect motor wires

[rajanishad]

left side to left side pins and right to right

[Swansong]

That's a neat setup :)

[rajanishad]

thanks