Arduino Flashing LED Project for Kids

Introduction: Arduino Flashing LED Project for Kids

Flashing LED Project with Arduino UNO. Basic Project for kids FUN

What You Need!!

  • Arduino UNO
  • Breadboard
  • 3 LED's
  • Jumper wires
  • 1k Ohm Resistors

Step 1: Connecting Wires

Connect all wires as per picture

  • connect ground with breadboard (-) Rail (Brown wire in picture)
  • connect all three resistors with led on the cathod side of LED connect to negative (ground) on Breadboard.
  • connect pin 13,12,11 to Arduino Board to each LED Respectively

Sketch for Flashing LED Program click on this link to download Sketch

Be the First to Share

    Recommendations

    • Space Contest

      Space Contest
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Plastic Challenge

      Plastic Challenge

    Comments