Arduino Simple Memory Game




Introduction: Arduino Simple Memory Game

About: Author, Blogger, Electronics Enthusiast and Entrepreneur. For complete Electronics Projects and Tutorials go to:
This project is all about creating a simple game to test your memory.

I’ll be using a Teensy 3.0 board. (If you want to know more about this board please click here to read a Getting Started Guide). This project is also 100% compatible with the Arduino.

Watch the video below

Step 1: Parts Required

  • 1x Arduino UNO (or an Teensy 3.0)
  • 8x 220 Ohm Resistor
  • 4x LED’s
  • 4x Pushbuttons
  • 1x Buzzer
  • 1x Breadboard
  • Jumper Cables

Step 2: Schematics

In the picture above you can find the schematics for the Arduino.
And also the schematics if you're using a Teensy 3.0 instead.

Step 3: Upload the Arduino Code

Click here to download the Code.
(The code above works great in the Arduino and Teensy)

Step 4: Final Step

It's done! If you didn't watch the youtube video yet, make sure you watch now. To see the demonstration of this project!

Did you enjoyed this project?
Please support my work by sharing this project with a friend!

Make sure you follow me on instructables so you don't miss my next project!

Have a problem?
Leave a comment below and I'll help you :)

P.S. Click here to see my blog where I post weekly Projects and Electronics Tips!

4 People Made This Project!


  • Origami Speed Challenge

    Origami Speed Challenge
  • Science Fair Challenge

    Science Fair Challenge
  • Trash to Treasure Contest

    Trash to Treasure Contest



Question 2 years ago

Hi RuiSantos,
Just finished making the project using the UNO, seems to work apart from the buttons not interacting with the game :( any ideas?
Thanks :)


6 years ago

Hello. My friend and I are doing this project for a school assignment. We inserted the code in Arduino, but we are not able to play the game. The buzzer just keeps making noises while the diodes blink many times. Is it possible to get any help soon?


6 years ago

it does not work.. :(


6 years ago

I tried making this, just without a buzzer.

I've tried modifying the code to cater for this, but the outcome is either 4 dimly lit LED's, or the game does the random LED's then proceeds to flash 4 LED's brightly and I'm not sure why.

Any help would be appreciated!