Introduction: Arduino Smart MoneyBox

By

Welcome friend, today we are going to make Smart Moneybox with Arduino.

We want to;

  1. When we drop the money onto compartment, device open the door after 3 seconds. Finally close the door.
  2. And count the how many coins in to the box.

Let's start..
PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

ALSO YOU CAN SUBSCRIBE FROM YOUTUBE; >>> My YouTube Channel <<<

Step 1: What Will We Use?

  1. Arduino
  2. LDR
  3. Servo Motor
  4. 5110 Screen
  5. A Battery
  6. 2 Leds
  7. Some Jumpers
  8. A Cardboard Box

Step 2: Cardboard Cuts;

You should cut your cardboard like this and pierce two led slot. After that paste the servo to cardboards' back.

You see 2 hole on the cardboard one of them for 5110 screen other for money slot.

Step 3: Unite the Parts;

Unite the parts like on the photos. Be careful for servo and money slot.

Connect the part each other strongly.

Step 4: Connections;

5110 to Arduino;

GND TO GND

Light TO (Optional)

VCC TO 3.3v

CLK TO D8

DIN TO D9

DC TO D10

CE TO D12

RST TO D11

SERVO TO ARDUINO;

SIGNAL TO D7

5V TO 5V

GND TO GND

LDR TO ARDUINO;

SIGNAL TO A0

5V TO 5V

GND TO GND

Step 5: Codes;

You can download the code from this link;

>>> CODE LINK <<<

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

ALSO YOU CAN SUBSCRIBE FROM YOUTUBE; >>> My YouTube Channel <<<

Thank You Dear Friends..

Step 6: YouTube Video;

You should watch the video.