Introduction: Atari Punk Console
This is my Version of the Atari Punk Console! I used the Schematic of Make Magazine (http://blog.makezine.com/2011/09/13/collins-lab-atari-punk-console/). It´s running fine at 9V.
Parts used in this APC:
- 1x NE556 Dual Timer Chip
- 1x Switch
- 1x Power Jack (2.1 mm)
- 1x Audio Jack (3.5 mm, mono)
- 2x Potentiometers 1MΩ (6mm)
- 2x Knobs (6mm)
- 1x 1kΩ Resistor
- 1x 10kΩ Resistor
- 1x 4.7kΩ Resistor
- 2x 100nF Ceramic Capacitor
- 1x 1uF Electrolytic Capacitor
For more Information, comment this post!
7 Comments
9 years ago
Thanks!
10 years ago on Introduction
Do you know what this case is called? Looks great!
Reply 10 years ago on Introduction
Thanks!
The case is actually this one: http://www.conrad.de/ce/de/product/523132/Universal-Gehaeuse-Polystyrol-Grau-135-x-95-x-45-1-St/?ref=detview1&rt=detview1&rb=1 .
Sorry, i don`t know where to get it in the USA.
10 years ago on Introduction
I bought a ready made case from conrad, and drilled the holes i needed. pretty easy
10 years ago on Introduction
well, im just wondering how you made that totally pro case!
10 years ago on Introduction
the important things are mentioned in this post. "For more Information, comment this post!" should mean, you can ask questions and i´ll reply!
10 years ago on Introduction
Really? no coments no info? That isn't the idea of Intructables .com ¬¬