Introduction: Awesome Fireworks Fired From RC Airplane

If you would like to remotely ignite fireworks from a radio controlled airplane, there's a lot you need to know. Not to mention that you will have to learn how to fly these things. Let's make the assumption that you are an experienced pilot, with a suitable sized RC airplane for this specific project.

Step 1: What You'll Need...

Step 2: Build It!

Khantal coil - take a piece of khantal wire and wind it up on a 1.5mm drillbit, this depends on the diameter of the fuse. Solder the necessary wires and connections as shown in the pictures. Khantal wire is a non-solderable material, so you will have to take a piece of copper wire and wrap around the wire going from the khantal coil.